Aerospace Bearings. Product Overview

Transcription

1 Aerospace s Product Overview

2 Introduction Introduction

3 Introduction Introduction Introduction About For decades, Kamatics (USA) and RWG (Germany) have been designing, testing, and manufacturing the highest performing bearings and flight critical parts in the industry, excelling under the most demanding conditions. Our proven innovations have kept us in front in our industry and helped clients keep out in front of theirs. We draw on over 50 years of experience and work hand-in-hand with our customers to tailor the optimal bearing for each application. Our advanced research teams continually test and introduce new technologies and materials to support the evolving demands of the industry. Our operations perform at the same high level as our products. With facilities in both the USA (Kamatics) and Germany (RWG), it is vital to implement great process and sound automation to ensure quality, reliability, short lead-times, and low cost. At Kaman, we invest heavily in formal training of operators, quality inspectors, engineers, and management personnel. Our field engineers are on-site all over the globe, providing customers with hands-on, immediate support. We assist in the design of new platforms, help solve problems with legacy platforms, and offer new technologies for future offerings. Our inside sales team and design engineers support field engineering and customers with reports, drawings, technical data and unparalleled service levels. KAMAN Specialty s and Engineered Products 5

4 Introduction Introduction Solutions Kamatics and RWG develops precision bearings and drive system solutions for demanding aerospace, industrial, hydropower, marine and motorsports applications. Our bearings solve maintenance issues, improve performance, reduce weight, and are engineered to perform in extreme environments. Technologies Kamatics and RWG products have evolved from the design of 4 base types of bearings to complex high-end bearings. Each one of our bearings is developed, tested, and approved according to the requirements of specific applications. Rotorcraft Rotor Systems and Controls Landing Gear and Doors Engines and Accessories Main Engine and Tail Rotor Driveshaft Systems Fixed Wing Aircraft Flight Controls Landing Gear and Doors Actuation Systems Engine and Accessories Aftermarket We are dedicated to supporting our airline and MRO customers by providing world-class service, a state of the art FAA repair station facility, and products readily available from our two authorized distributors. Space Flight Controls Power Systems Solar Array Deployment Systems Hatches and Doors Self-Lubricating s Our self-lubricating liner systems have established superior results in providing longer life and lower maintenance costs. Rolling Element s Where lowest friction, highest accuracy and higher speeds are required, rolling element bearings are the first choice. Metal to Metal s These bearings are traditionally used for high load applications and/ or severe environmental conditions such as high or low temperatures. Flexible Drive Systems Drive system applications present some of the most challenging and demanding power transmission requirements for flexible coupling elements. Marine Hydropower Oil & Gas Motorsports Titanium Wear Strips Dry-Film Lubricant Navigational Lock Systems Power Generation Systems Steering and Diving Mechanisms Water Tight Hatches and Doors Gate Systems Kaplan Hub Trunnion Wicket Gate Bushing Down-Hole Drilling Oil Sands Shovels Risers Deck Equipment Cranes Controllable Pitch Blades Steering Suspensions In applications that require low overall weight, titanium alloy is a popular choice for a bearing substrate material. We offer multiple types of Wear Strips with each providing unique characteristics to prevent metal to metal wear and fretting damage from sliding or rubbing surfaces. KFL-DM is a unique surface coating that provides durable, lubricious, low friction sliding performance. KFL-DM is a polymer based film coating impregnated with PTFE, and other special fillers. 6 KAMAN Specialty s and Engineered Products 7 KAMAN Specialty s and Engineered Products

5 Introduction Introduction Product Index Rolling-Element s Spherical s Spherical s Cont. Rod Ends Cont. Product Page Product Page Product Page Product Page EN3045 / EN3046 / EN EN3281 / EN3282 / EN EN3284 / EN3285 / EN EN3287 / EN3288 / EN EN FJN FT ABS0131 / ABS ABS0132 / ABS ABS0133 / ABS ABS0348 / NSA B MB K / NSA8101 / NSA K...A / NSA 8102 / NSA K...B / NSA8103 / NSA KS ABS0136 / ABS K...BS / NSA8106 / NSA EN3059 / EN3060 / EN EN FTRCE FTRCEI AGF EN3056 / EN3057 / EN ABS0134 / ABS ABS0135 / ABS ABS DP / NSA8105 / NSA DP...W DS / NSA8104 / NSA DW NSA EN3053 / EN3054 / EN EN3290 / EN3291 / EN DSR / NSA Fraslip Fabric Liner EN4613 R EN4613 S EN4614 R EN4614 S FMGB FMGN FMGS FMGU EN2584 / FRE EN2585 / FLR EN EN EN EN FRA Swaged Metal to Metal EN EN4265 / EN EN EN FMGB FMGN FMGS FMGV Loader Slot Metal to Metal EN EN GE...D GE...DN GL / GLD KAron Molded Liner KR-CN / AS KR-CNG / AS KR-CW / AS KR-CWG / AS KR-CN/4 / AS81820/ KR-CNG/1 / AS81820/ KR-CW/2 / AS81820/ KR-CWG/3 / AS81820/ KR-CE (Extended Inner Race / High Misalignment) KR-CEG (Extended Inner Race / High Misalignment with Groove) KR-C Miniature Rod Ends Product Page Ball EN EN FC...M / FCN...M ASNA2579E NSA REP / RAP REP...F Metal to Metal EN EN Fraslip Fabric Liner FMW3E_.4 / NSA FMW3F_.4 / NSA REM REF KAron Molded Liner KR-F / AS81935/ KR-M / AS81935/ KR-FS / Miniature KR-MS / Miniature Track Rollers / Cam Followers Product Page KAron Molded Liner KRP562 / NAS KRP567 / KRP with Crowned Outer Race KRP502 / AS KRP503 / AS KRP522 / KRP with Crowned Outer Race KRP523 / Heavy Duty Track Rollers KRP527 / Self-Aligning Track Rollers KRP505 / AS KRP506 / AS KAron Molded Liner Airframe Pivot KRP() Series / AS KRP() A Series / AS KRP() B Series / AS KRP() BS Series / AS KRP() P Series / AS KRPB500 / AS

6 Introduction Product Index Journal s Product Page Fraslip Fabric Liner ABS ABS EN EN FBPA...A... / FBPA...C FBPA1 / FBPA EN EN ABS D ABS F ABS D ABS F EN4535 2D EN4535 2F EN4537 2D EN4537 2F FBFA...A... / FBFA...C FBFA1 / FBFA NSA8147 / NSA EN EN KAron Molded Liner KRJ / AS KRJ-U / AS Rolling-Element s Product Overview Rolling-Element s 10

7 Rolling-Element s Rolling-Element s Rolling-Element s Product Overview Table of Contents Product Page Product Page EN3045 / EN3046 / EN EN3281 / EN3282 / EN EN3284 / EN3285 / EN EN3287 / EN3288 / EN EN FJN FT ABS0131 / ABS ABS0132 / ABS ABS0133 / ABS ABS0348 / NSA B MB K / NSA8101 / NSA K...A / NSA 8102 / NSA K...B / NSA8103 / NSA KS ABS0136 / ABS K...BS / NSA8106 / NSA EN3059 / EN3060 / EN EN FTRCE FTRCEI AGF EN3056 / EN3057 / EN ABS0134 / ABS ABS0135 / ABS ABS DP / NSA8105 / NSA DP...W DS / NSA8104 / NSA DW NSA EN3053 / EN3054 / EN EN3290 / EN3291 / EN DSR / NSA

8 Rolling-Element s Rolling-Element s EN3045 / EN3046 / EN3047 Single Row Full Complement EN3045 / EN3046 / EN3047 d Δ dmp D Δ Dmp B Δ Bmp Starting Torque E / (max.) Starting Torque P / (max.) Axial Play (max.) Static Axial Static Radial mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Ncm In.-lbs Ncm In.-lbs mm Inch mm Inch kn lbs kn lbs g lbs to to to to to to to to to to to to to to to to to to to to C Δ Cmp d 1 (min.) mm Inch mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to r Δ rmp EN3045 EN3045 A 20 E A Grease Type A: NATO G 354 / MIL-PRF B: NATO G 395 / MIL-PRF E Protection E: Sealed P: Shielded (CRES) EN3045 Series EN2031 / / AISI E52100 EN3046 Series EN2031 / / AISI E52100 Cadmium Plated Except Bore and raceways EN3047 Series EN2030 / / AISI 440C Technical Specification EN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 15

9 Rolling-Element s Rolling-Element s EN3281 / EN3282 / EN3283 Single Row Full Complement EN3281 / EN3282 / EN3283 d Δ dmp D Δ Dmp B Δ Bmp Axial Play (max.) Static Axial Static Radial mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch kn lbs kn lbs g lbs to to to to to to to to to to to to to to to to to to to to to to d 1 (min.) r Δ rmp Starting Torque P / (max.) Starting Torque E / (max.) mm Inch mm Inch mm Inch Ncm In.-lbs Ncm In.-lbs to to to to to to to to to to to to to to to to to to to to to to EN3281 EN3281 A 20 E A Grease Type A: NATO G 354 / MIL-PRF B: NATO G 395 / MIL-PRF E Protection E: Sealed P: Shielded (CRES) EN3281 Series EN2031 / AISI E52100 EN3282 Series EN2031 / AISI E52100 Cadmium Plated Except Bore and raceways EN3283 Series EN2030 / AISI 440C Technical Specification EN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 17

10 Rolling-Element s Rolling-Element s EN3284 / EN3285 / EN3286 Single Row Full Complement EN3284 / EN3285 / EN3286 d Δ dmp D Δ Dmp B Δ Bmp Starting Torque E / (max.) Starting Torque P / (max.) Axial Play (max.) Static Axial Static Radial mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Ncm In.-lbs Ncm In.-lbs mm Inch mm Inch kn lbs kn lbs to to to to to to to to to to to to to to to to to to to to C Δ Cmp d 1 (min.) r Δ rmp mm Inch mm Inch mm Inch mm Inch mm Inch g lbs to to to to to to to to to to to to to to to to to to to to EN3284 EN3284 A 20 E A Grease Type A: NATO G 354 / MIL-PRF B: NATO G 395 / MIL-PRF E Protection E: Sealed P: Shielded (CRES) EN3284 Series EN2031 / AISI E52100 EN3285 Series EN2031 / AISI E52100 Cadmium Plated Except Bore EN3286 Series EN2030 / AISI 440C Technical Specification EN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 19

11 Rolling-Element s Rolling-Element s EN3287 / EN3288 / EN3289 Self-Aligning Full Complement Double Row EN3287 / EN3288 / EN3289 d Δ dmp D Δ Dmp B Δ Bmp L Axial Play R / (max.) Axial Play N/L / (max.) Static Axial Static Radial mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch kn lbs kn lbs g lbs to to to to to to to to to to to to to to to to C Δ Cmp d 1 (min.) mm Inch mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to Starting Torque E / (max.) Starting Torque P / (max.) r R Δ rmp N Ncm In.-lbs Ncm In.-lbs mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to EN3287 EN3287 A N 20 E A Grease Type A: NATO G 354 / MIL-PRF B: NATO G 395 / MIL-PRF N Radial / Axial Play N: Normal L: Group 3 R: Special 20 E Protection E: Sealed P: Shielded (CRES) EN3287 Series EN2031 / AISI E52100 EN3288 Series EN2031 / AISI E52100 Cadmium Plated Except Bore EN3289 Series EN2030 / AISI 440C Technical Specification EN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 21

12 Rolling-Element s Rolling-Element s EN4033 Single Row Full Complement EN4033 d Δ dmp D Δ Dmp B Δ Bmp Axial Play (max.) Static Axial Static Radial mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch kn lbs kn lbs g lbs to to to to to to to to to to to to to to to to to to to to to to d 1 (min.) r Δ rmp Starting Torque E / (max.) Starting Torque P / (max.) mm Inch mm Inch mm Inch Ncm In.-lbs Ncm In.-lbs to to to to to to to to to to to to to to to to to to to to to to EN4033 EN4033 A 20 E T A Grease Type A: NATO G 354 / MIL-PRF B: NATO G 395 / MIL-PRF E Protection E: Sealed P: Shielded (CRES) T Surface Treatment No : None T: Passivated Material EN2030 / AISI 440C Technical Specification EN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 23

13 Rolling-Element s Rolling-Element s FJN Single Row Full Complement FJN d Δ dmp D Δ Dmp B Δ Bmp Starting Torque No / (max.) Starting Torque E / (max.) Static Radial mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch FJN FJN FJN FJN FJN FJN FJN FJN FJN FJN Ncm In.-lbs Ncm In.-lbs mm Inch kn lbs g lbs FJN to to FJN to to FJN to to FJN to to FJN to to FJN to to FJN to to FJN to to FJN to to FJN to to C Δ Cmp d 1 (min.) r Δ rmp mm Inch mm Inch mm Inch mm Inch mm Inch FJN to to FJN to to FJN to to FJN to to FJN to to FJN to to FJN to to FJN to to FJN to to FJN to to FJN FJN 15 A E A Grease Type A: NATO G 354 / MIL-PRF B: NATO G 395 / MIL-PRF E Protection E: Sealed No : Shielded Material No EN2031 / / AISI E EN2030 / / AISI 440C Technical Specification EN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 25

14 Rolling-Element s Rolling-Element s FT Single Row Full Complement FT d Δ dmp D Δ Dmp B Δ Bmp Starting Torque E / (max.) Static Radial mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT FT Ncm In.-lbs mm Inch kn lbs g lbs FT to to FT to to FT to to FT to to FT to to FT to to FT to to FT to to FT to to FT to to FT to to FT to to FT to to FT to to FT to to FT to to d 1 (min.) r Δ rmp Starting Torque No / (max.) mm Inch mm Inch mm Inch Ncm In.-lbs FT to to FT to to FT to to FT to to FT to to FT to to FT to to FT to to FT to to FT to to FT to to FT to to FT to to FT to to FT to to FT to to FT 40 FT 40 A E A Grease Type A: NATO G 354 / MIL-PRF B: NATO G 395 / MIL-PRF G 350: NATO G 350 / MIL-G-3278 E Protection E: Sealed No : Shielded (CRES) Material No EN2031 / / AISI E EN2030 / / AISI 440C 26 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 27

15 Rolling-Element s Rolling-Element s ABS0131 / ABS0342 Single Row Full Complement Dimensions According to AS27640 ABS0131 / ABS0342 d Δ dmp D Δ Dmp B Δ Bmp Axial Play N / (max.) Axial Play R / (max.) Static Radial Static Axial mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch 03A mm Inch mm Inch kn lbs kn lbs g lbs 03A C Δ Cmp d 1 (min.) r 1 Δ r 1 mp r 2 mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch 03A ABS N Radial / Axial Play N: Normal R: Reduced Shields CRES ABS0342 N Radial / Axial Play N: Normal R: Reduced Sealed Type Seals (PTFE); Seal Retainers (CRES) Materials EN2030 / / AISI 440C Cadmium Plated Except Bore Lubrication NATO G 395 / MIL-PRF Technical Specification SAE AS7949 / DAN446 Δ r 2 mp Starting Torque ABS 0131 / (max.) Starting Torque ABS 0342 / (max.) N R 03 mm Inch Ncm In.-lbs Ncm In.-lbs mm Inch mm Inch 03A to to to to to to to to to to to to to to to to to to to to to to to to to to to to ABS N ABS0342 N KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 29

16 Rolling-Element s Rolling-Element s ABS0132 / ABS0343 Single Row Full Complement Dimensions According to AS27641 ABS0132 / ABS0343 d Δ dmp D Δ Dmp B Δ Bmp Axial Play N / (max.) Axial Play R / (max.) Static Radial Static Axial mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch kn lbs kn lbs g lbs C Δ Cmp d 1 (min.) r 1 Δ r 1 mp r 2 mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch ABS N Radial / Axial Play N: Normal R: Reduced Shields CRES ABS0343 N Radial / Axial Play N: Normal R: Reduced 03 Sealed Type Seals (PTFE); Seal Retainers (CRES) Materials EN2030 / / AISI 440C Cadmium Plated Except Bore Lubrication NATO G 395 / MIL-G Technical Specification SAE AS7949 / DAN446 Δ r 2 mp Starting Torque ABS0132 / (max.) Starting Torque ABS0343 / (max.) N R mm Inch Ncm In.-lbs Ncm In.-lbs mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to ABS N ABS0343 N KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 31

17 Rolling-Element s Rolling-Element s ABS0133 / ABS0344 Single Row Full Complement Dimensions According to AS27642 ABS0133 / ABS0344 d Δ dmp D Δ Dmp B Δ Bmp Axial Play N / (max.) Static Radial Static Axial mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch kn lbs kn lbs g lbs max max max max max max max max max max max max max max max max max max C Δ Cmp d 1 (min.) r 1 Δ r 1 mp Starting Torque ABS0344 / (max.) mm Inch mm Inch mm Inch mm Inch mm Inch Ncm In.-lbs ABS N Radial / Axial Play N: Normal R: Reduced Shields CRES ABS0344 N Radial / Axial Play N: Normal R: Reduced 03 Sealed Type Seals (PTFE); Seal Retainers (CRES) Materials EN2030 / / AISI 440C Cadmium Plated Except Bore Lubrication NATO G 395 / MIL-G Technical Specification SAE AS7949 / DAN446 Starting Torque ABS 0133 / (max.) R N Axial Play R / (max.) Ncm In.-lbs mm Inch mm Inch mm Inch to to to to max max to to to to max max to to to to max max to to to to max max to to to to max max to to to to max max to to to to max max to to to to max max to to to to max max. ABS N ABS0344 N KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 33

18 Rolling-Element s Rolling-Element s ABS0348 / NSA8154 Single Row Full Complement Dimensions According to AS21428 ABS0348 / NSA8154 d Δ dmp D Δ Dmp B Δ Bmp mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch C Δ Cmp r rmp d 1 (min.) Starting Torque (max.) mm Inch mm Inch mm Inch mm Inch mm Inch Ncm In.-lbs Axial Play (max.) Static Radial Static Axial ABS0348 R 10 Sealed Type Seals (PTFE); Seal Retainers (CRES) ABS E Sealed Type E: Sealed No : Shielded (CRES) Materials EN2030 / / AISI 440C Cadmium Plated Except Bore Lubrication NATO G 395 / MIL-PRF Technical Specification SAE AS7949 / DAN446 mm Inch mm Inch kn lbs kn lbs g lbs to to to to to to to to to to to to to to to to to to to to ABS0348 R 10 NSA E 34 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 35

19 Rolling-Element s Rolling-Element s B500 Single Row Full Complement Dimensions According to AS27646 B500 d Δ dmp D Δ Dmp B Δ Bmp Static Radial mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch B ± ± B ± ± B ± ± B ± ± B ± ± B ± ± B ± ± B ± ± B ± ± mm Inch kn lbs g lbs B to to B to to B to to B to to B to to B to to B to to B to to B to to C Δ Cmp d 1 (min.) r mm Inch mm Inch mm Inch mm Inch B B B B B B B B B B 500 B 500 DD G DD Sealed Type DD: Sealed P: Shielded G Grease Type G: NATO G 354 / MIL-PRF No : NATO G 395 / MIL-PRF Material No EN2031 / / AISI E52100 Cadmium Plated Except Bore EN2030 / / AISI 440C Cadmium Plated Except Bore Technical Specification SAE AS KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 37

20 Rolling-Element s Rolling-Element s MB500 Single Row Full Complement Dimensions According to AS21428 MB500 d Δ dmp D Δ Dmp B Δ Bmp Axial Play Static Radial Static Axial mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch MB MB MB MB MB MB MB MB MB mm Inch mm Inch kn lbs kn lbs g lbs MB to to MB to to MB to to MB to to MB to to MB to to MB to to MB to to MB to to C Δ Cmp r rmp d 1 (min.) Starting Torque DD / (max.) mm Inch mm Inch mm Inch mm Inch mm Inch Ncm In.-lbs MB MB MB MB MB MB MB MB MB MB 500 MB500 DD G DD Sealed Type DD: Sealed P: Shielded G Grease Type G: NATO G 354 / MIL-PRF No : NATO G 395 / MIL-PRF Material No EN2031 / / AISI E52100 Cadmium Plated Except Bore EN2030 / / AISI 440C Cadmium Plated Except Bore Technical Specification SAE AS KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 39

21 Rolling-Element s Rolling-Element s K / NSA8101 / NSA8111 Single Row Full Complement Dimensions According to AS27640 K / NSA8101 / NSA8111 d Δ dmp D Δ Dmp B Δ Bmp Axial Play Max. for NSA only Static Radial Static Axial mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch kn lbs kn lbs g lbs C Δ Cmp d 1 (min.) r 1 Δ r 1 mp r 2 mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Δ r 2 mp No R mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to NSA NSA Material EN2030 / / AISI 440C Cadmium Plated Except Bore NSA 8101 Sealed NSA 8111 Shielded (CRES) Lubrication NATO G 354 / MIL-PRF Technical Specification SAE AS7949 K P Protection P: Sealed No : Shielded (CRES) 15 R R: Reduced No : Normal K P 15 R G G Grease Type G: NATO G 354 / MIL-PRF No : NATO G 395 / MIL-PRF Material No EN2031 / / AISI E52100 Cadmium Plated Except Bore EN2030 / / AISI 440C Cadmium Plated Except Bore Technical Specification SAE AS KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 41

22 Rolling-Element s Rolling-Element s K...A / NSA 8102 / NSA8112 Single Row Full Complement Dimensions According to AS27641 K...A / NSA 8102 / NSA8112 d Δ dmp D Δ Dmp B mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch C No R Axial Play Max. for NSA only Static Radial Static Axial mm Inch mm Inch mm Inch kn lbs kn lbs to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to d 1 (min.) r 1 Δ r 1 mp r 2 Δ r 2 mp mm Inch mm Inch mm Inch mm Inch mm Inch g lbs NSA Material EN2030 / / AISI 440C Cadmium Plated Except Bore NSA NSA 8102 Seals (PTFE); Seal Retainers (CRES) NSA 8112 Shielded (CRES) Lubrication NATO G 354 / MIL-PRF Technical Specification SAE AS7949 K A P Protection P: Sealed No : Shielded (CRES) 3 K P 3 A R G R R: Reduced No : Normal G Grease Type G: NATO G 354 / MIL-PRF No : NATO G 395 / MIL-PRF Material No EN2031 / / AISI E52100 Cadmium Plated Except Bore EN2030 / / AISI 440C Cadmium Plated Except Bore Technical Specification SAE AS KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 43

23 Rolling-Element s Rolling-Element s K...B / NSA8103 / NSA8113 Single Row Full Complement Dimensions According to AS27642 K...B / NSA8103 / NSA8113 d Δ dmp D Δ Dmp B Δ Bmp mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch C Δ Cmp d 1 (min.) r Δ rmp mm Inch mm Inch mm Inch mm Inch mm Inch g lbs R N Axial Play Max. for NSA only Static Radial Static Axial mm Inch mm Inch mm Inch kn lbs kn lbs to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to NSA Material EN2030 / / AISI 440C Cadmium Plated Except Bore NSA NSA8103 Seals (PTFE); Seal Retainers (CRES) NSA8113 Shielded (CRES) Lubrication NATO G 354 / MIL-PRF Technical Specification SAE AS7949 K B P Protection P: Sealed No : Shielded (CRES) 25 R R: Reduced No : Normal K P 25 B R G G Grease Type G: NATO G 354 / MIL-PRF No : NATO G 395 / MIL-PRF Material No EN2031 / / AISI E52100 Cadmium Plated Except Bore EN2030 / / AISI 440C Cadmium Plated Except Bore Technical Specification SAE AS KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 45

24 Rolling-Element s Rolling-Element s KS Self-Aligning Single Row Full Complement Dimensions According to AS27645 KS d Δ dmp D Δ Dmp B Bmp R Axial Play (max.) Static Radial Static Axial α mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch KS3L KS KS KS4A KS KS5A KS KS6A KS KS mm Inch mm Inch mm Inch kn lbs kn lbs KS3L to to to to KS to to to to KS to to to to KS4A to to to to KS to to to to KS5A to to to to KS to to to to KS6A to to to to KS to to to to KS to to to to C Δ Cmp d 1 (min.) r 1 r mm Inch mm Inch mm Inch mm Inch mm Inch g lbs KS3L KS KS KS4A KS KS5A KS KS6A KS KS KS P Protection P: Sealed No : Shielded (CRES) KS P 3 R G R R: Reduced No : Normal G Grease Type G: NATO G 354 / MIL-PRF No : NATO G 395 / MIL-PRF Material No EN2031 / / AISI E52100 Cadmium Plated Except Bore EN2030 / / AISI 440C Cadmium Plated Except Bore Technical Specification SAE AS KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 47

25 Rolling-Element s Rolling-Element s ABS0136 / ABS0347 Single Row Self-Aligning Full Complement Dimensions According to AS27648 ABS0136 / ABS0347 d Δ dmp D Δ Dmp B Δ Bmp Axial Play (max.) Static Radial Static Axial α mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch kn lbs kn lbs g lbs C Δ Cmp mm Inch mm Inch mm Inch mm Inch mm Inch Swivel Torque ABS0136 / (max.) d 1 (min.) Starting Torque ABS0347 / (max.) r Nm In.-lbs Ncm In.-lbs Ncm In.-lbs mm Inch to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to Δ rmp ABS ABS N N Radial / Axial Play N: Normal Shields CRES ABS0347 N Radial / Axial Play N: Normal 25 ABS0347 N 25 Sealed Type Seals (PTFE); Seal Retainers (CRES) Materials EN2030 / / AISI 440C Cadmium Plated Except Bore Lubrication NATO G 395 / MIL-PRF Technical Specification SAE AS7949 / DAN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 49

26 Rolling-Element s Rolling-Element s K...BS / NSA8106 / NSA8116 Single Row Self-Aligning Full Complement Dimensions According to AS27648 K...BS / NSA8106 / NSA8116 d Δ dmp D Δ Dmp B Δ Bmp Static Radial Static Axial mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch kn lbs kn lbs g lbs to to to to to to to to to to to to to to to to to to to to C Δ Cmp d 1 (min.) r Δ rmp α mm Inch mm Inch mm Inch mm Inch mm Inch NSA Material EN2030 / / AISI 440C Cadmium Plated Except Bore NSA 8106 Seals (PTFE); Seal Retainers (CRES) NSA 8116 Shielded (CRES) Lubrication NATO G 354 / MIL-PRF Technical Specification SAE AS7949 K BS P Protection P: Sealed No : Shielded (CRES) 25 G Grease Type G: NATO G 354 / MIL-PRF No : NATO G 395 / MIL-PRF Material Lubrication NATO G 395 / MIL-PRF No EN2031 / / AISI E52100 Cadmium Plated Except Bore EN2030 / / AISI 440C Cadmium Plated Except Bore Technical Specification SAE AS7949 NSA K P 25 BS G KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 51

27 Rolling-Element s Rolling-Element s EN3059 / EN3060 / EN3061 Single Row Flanged Type Self-Aligning Full Complement EN3059 / EN3060 / EN3061 d Δ dmp D B C d 1 ±0.200 ± ±0.150 ± ±0.050 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch A ±0.250 ± P nominal r Tilting Torque ß mm Inch mm Inch mm Inch Ncm In.-lbs ±1 min to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to Tilting Angle E Starting Torque P Axial Play (max.) Static Radial Flange C Flange D EN3061 A Grease Type A: NATO G 354 / MIL-PRF B: NATO G 395 / MIL-PRF E Protection E: Sealed P: Shielded D Flange Type (See Schematic Drawing) T Surface Treatment T: Passivated No : None EN3059 : EN2031 / / AISI E52100 Flange: EN2213 / Cadmium Plated EN3060 : EN2031 / / AISI E52100 Cadmium Plated Flange: EN2213 / Cadmium Plated EN3061 : EN2030 / / AISI 440C Flange: EN2539 / / 17-4PH H1100 Technical Specification EN3727 Ncm In.-lbs Ncm In.-lbs mm Inch mm Inch kn lbs g lbs g lbs to to to to to to to to to to to to to to to to to to EN3061 A 16 E D T 52 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 53

28 Rolling-Element s Rolling-Element s EN4041 Single Row Flanged Type Self-Aligning Full Complement EN4041 d Δ dmp D B C d 1 ±0.200 ± ±0.150 ± ±0.050 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Axial Play (max.) Static Radial Flange D Flange C mm Inch mm Inch kn lbs g lbs g lbs to to to to to to to to to to to to d 2 A P L L 1 ß ±1.000 ± nominal ±0.150 ± ±0.100 ± mm Inch mm Inch mm Inch mm Inch mm Inch ±1 min r Tilting Torque E Starting Torque mm Inch Nm In.-lbs Ncm In.-lbs Ncm In.-lbs to to to to to to to to to to to to to to to to to to to to to to to to P Tilting Angle EN4041 A Grease Type A: NATO G 354 / MIL-PRF B: NATO G 395 / MIL-PRF EN4041 A 32 P C T 32 P Protection E: Sealed P: Shielded (CRES) C Flange Type (See ) T Surface Treatment C: Passivated No : None Series EN4041 Material EN2031 / / AISI E52100 Flange EN2539 / / 17-4PH H1100 Technical Specification EN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 55

29 Rolling-Element s Rolling-Element s FTRCE Single Row Flanged Type Self-Aligning Full Complement d Δ dmp D B C d 1 ±0.250 ± ±0.150 ± ±0.050 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch A P d 2 ±0.250 ± ±0.100 ± mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to to to Tilting Torque E / (max.) Starting Torque No / (max.) Ncm In.-lbs Ncm In.-lbs Ncm In.-lbs to to to to to to to to to to to to to to to to to to r ß Titling Angle Axial Play (max.) Static Radial Full Flange No Full Flange C mm Inch mm Inch kn lbs g lbs g lbs to to to to to to to to to to to to to to to to to to FTRCE 40 A Grease Type A: NATO G 354 / MIL-PRF B: NATO G 395 / MIL-PRF E Protection No : Shielded E: Sealed FTRCE 40 A E C C Flange Type (See ) Material No Flange: EN 2213 / Cadmium Plated Rings + Balls: EN2031 / / AISI E52100 FTRCE Flange: EN2136 / / AISI 431 Cadmium Plated Rings + Balls: EN2030 / / AISI 440C 56 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 57

30 Rolling-Element s Rolling-Element s FTRCEI Single Row Flanged Type Self-Aligning Full Complement FTRCEI d Δ dmp D B C ±0.150 ± mm Inch mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to Axial Play (max.) Static Radial Flange C Flange No mm Inch mm Inch kn In.-lbs g lbs g lbs to to to to to to to to to to to to ß Tilting Angle d 1 d 2 A P L L 1 ±0.050 ± ±0.250 ± ±0.100 ± ±0.150 ± ±0.100 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch r Tilting Torque E / (max.) Starting Torque P / (max.) mm Inch Ncm In.-lbs Ncm In.-lbs Ncm In.-lbs to to to to to to to to to to to to to to to to to to to to to to to to FTRCEI 32 A Grease Type A: NATO G 354 / MIL-PRF B: NATO G 395 / MIL-PRF E Protection No : Shielded E: Sealed FTRCEI 32 A E C C Flange Type (See Schematic Drawing) Material No Flange: EN2213 / Cadmium Plated Rings + Balls: EN2031 / / AISI E Flange: EN2136 / / AISI 431 Cadmium Plated Rings + Balls: EN2030 / / AISI 440C 58 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 59

31 Rolling-Element s Rolling-Element s AGF Double Row Full Complement AGF d Δ dmp D Δ Dmp B Δ Bmp C Δ Cmp d 1 r Δ rmp mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to mm Inch mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to E / (max.) Starting Torque No / (max.) Diagonal Play Static Limit Radial Load AGF 8 A Grease Type A: NATO G 354 / MIL-PRF B: NATO G 395 / MIL-PRF C Surface Treatment No : None C: Cadmium Plated Except Bore E Protection No : Shielded E: Sealed Material No EN2031 / / AISI E EN2030 / / AISI 440C Ncm In.-lbs Ncm In.-lbs mm Inch kn lbs g lbs to to to to to to to to to to AGF 8 A C E KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 61

32 Rolling-Element s Rolling-Element s EN3056 / EN3057 / EN3058 Double Row Full Complement EN3056 / EN3057 / EN3058 d Δ dmp D Δ Dmp Diagonal Play Static Radial Static Axial mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to mm Inch kn lbs kn lbs g lbs to to to to to to to to to to to to B Bmp C Δ Cmp d 1 mm Inch mm Inch mm Inch mm Inch mm Inch r Δ rmp E / (max.) Starting Torque P / (max.) mm Inch mm Inch Ncm In.-lbs Ncm In.-lbs to to to to to to to to to to to to EN3056 EN3056 A 10 P A Grease Type A: NATO G 354 / MIL-PRF B: NATO G 395 / MIL-PRF P Protection No : Shielded E: Sealed EN3056 Series EN2031 / / AISI E52100 EN3057 Series EN2031 / / AISI E52100 Cadmium Plated Except Bore EN3058 Series EN2030 / / AISI 440C Technical Specification EN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 63

33 Rolling-Element s Rolling-Element s ABS0134 / ABS0345 Self-Aligning Double Row Full Complement Dimensions According to AS27643 ABS0134 / ABS0345 d Δ dmp D Δ Dmp B Δ Bmp Axial Play (max.) Static Radial Static Axial mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch kn lbs kn lbs g lbs r 1 x 45 r 2 x 45 C Δ Cmp d mm Inch mm Inch mm Inch mm Inch mm Inch ABS N N: Normal R: Reduced Shields CRES ABS0345 N N: Normal R: Reduced Sealed Type Seals (PTFE); Seal Retainers (CRES) Materials EN2030 / / AISI 440C Cadmium Plated Except Bore Lubrication NATO G 395 / MIL-PRF Technical Specification SAE AS7949 / DAN446 ABS0134 / (max.) Starting Torque ABS0345 / (max.) N R Ncm In.-lbs Ncm In.-lbs mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to ABS N 03 ABS0345 N KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 65

34 Rolling-Element s Rolling-Element s ABS0135 / ABS0346 Double Row Full Complement Dimensions According to AS27644 ABS0135 / ABS0346 d Δ dmp D Δ Dmp B Δ Bmp Axial Play (max.) Static Radial Static Axial mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch kn lbs kn lbs g lbs C Δ Cmp d 1 r 1 x 45 Δ r 1 mp mm Inch mm Inch mm Inch mm Inch mm Inch ABS N Radial / Axial Play N: No : Axial Play Shields CRES ABS0346 N Radial / Axial Play N: No : Axial Play 03 Sealed Type Seals (PTFE); Seal Retainers (CRES) Materials EN2030 / / AISI 440C Cadmium Plated Except Bore Lubrication NATO G 395 / MIL-PRF Technical Specification SAE AS7949 r 2 x 45 Δ r 2 mp ABS0346 / (max.) Starting Torque ABS0135 / (max.) N mm Inch mm Inch Ncm In.-lbs Ncm In.-lbs mm Inch to to to to to to to to to to to to ABS N ABS0346 N KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 67

35 Rolling-Element s Rolling-Element s ABS0363 Self-Aligning Full Complement Double Row ABS0363 d Δ dmp D Δ Dmp B Δ Bmp Starting Torque (max.) N R Axial Play Static Radial Static Axial mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Ncm In.-lbs mm Inch mm Inch mm Inch kn lbs kn lbs to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to C Δ Cmp d 1 r Δ rmp mm Inch mm Inch mm Inch mm Inch mm Inch g lbs ABS0363 ABS0363 N N N: Normal R: Reduced Sealed Type: Seals (PTFE); Seal Retainers (CRES) No EN2030 / / AISI 440C Cadmium Plated Except Bore Lubrication NATO G 395 / MIL-PRF Technical Specification SAE AS57949 / DAN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 69

36 Rolling-Element s Rolling-Element s DP / NSA8105 / NSA8115 Double Row Full Complement Dimensions According to AS27644 DP / NSA8105 / NSA8115 d Δ dmp D Δ Dmp B Δ Bmp C Δ Cmp d 1 r 1 x 45 r 2 x 45 mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to Axial Play (max.) Static Radial Static Axial NSA8115 Number of Series 03 Material EN2030 / / AISI 440C Cadmium Plated Except Bore NSA NSA 8105 Seals (PTFE); Seal Retainers (CRES) NSA 8115 Shielded (CRES) Lubrication NATO G 354 / MIL-PRF Technical Specification SAE AS7949 DP Number of Series P Protection P: Sealed No : Shielded (CRES) 3 DP P 3 G G Grease Type G: Grease NATO G 354 / MIL-PRF No : NATO G 395 / MIL-PRF Material No EN2031 / / AISI E52100 Cadmium Plated Except Bore EN2030 / / AISI 440C Cadmium Plated Except Bore Technical Specification SAE AS7949 mm Inch mm Inch kn lbs kn lbs g lbs to to to to to to to to to to to to KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 71

37 Rolling-Element s Rolling-Element s DP...W Double Row Angular Full Complement DP...W d Δ dmp D Δ Dmp B Δ Bmp C Δ Cmp d 1 r 1 x 45 Δ r 1 mp r 2 x 45 mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Δ r 2 mp Axial Play Static Radial DP W Number of Series Angle: 20 P Protection P: Sealed No : Shielded (CRES) 3 G Grease Type G: Grease NATO G 354 / MIL-PRF No : NATO G 395 / MIL-PRF Material No EN2031 / / AISI E52100 Cadmium Plated Except Bore EN2030 / / AISI 440C Cadmium Plated Except Bore mm Inch mm Inch mm Inch kn lbs g lbs to to to to to to to to to to to to DP P 3 W G KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 73

38 Rolling-Element s Rolling-Element s DS / NSA8104 / NSA8114 Self-Aligning Double Row Full Complement Dimensions According to AS27643 DS / NSA8104 / NSA8114 d Δ dmp D Δ Dmp B Δ Bmp Axial Play (max.) Static Radial Static Axial mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch kn lbs kn lbs g lbs C Δ Cmp d 1 r 1 x 45 Δ r 1 mp mm Inch mm Inch mm Inch mm Inch mm Inch r 2 x 45 Δ r 2 mp / N / R mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to NSA8114 Number of Series 03 Material EN2030 / / AISI 440C Cadmium Plated Except Bore NSA NSA 8104 Seals (PTFE); Seal Retainers (CRES) NSA 8114 Shielded (CRES) Lubrication NATO G 354 / MIL-PRF Technical Specification SAE AS7949 DS Number of Series P Protection P: Sealed No : Shielded (CRES) 03 DS P 3 R G R R: Reduced No : Normal G Grease Type G: Grease NATO G 354 / MIL-PRF No : NATO G 395 / MIL-PRF Material No EN2031 / / AISI E52100 Cadmium Plated Except Bore EN2030 / / AISI 440C Cadmium Plated Except Bore; Bright Passivated Technical Specification SAE AS KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 75

39 Rolling-Element s Rolling-Element s DW Extra Wide Double Row Angular Dimensions According to AS27647 DW Type d Δ dmp D Δ Dmp B Δ Bmp mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch DW4 K DW4 K DW DW DW DW Type C Δ Cmp d 1 r 1 x 45 Δ r 1 mp r 2 x 45 mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch DW4 K DW4 K DW DW DW DW G With Lubrication Grooves and Holes DW DW4K. DW4K2 are with Cage 5 R R: Reduced No : Normal L Grease Type L : NATO G 354 / MIL-PRF No : NATO G 395 / MIL-PRF Material No EN2031 / / AISI E52100 Cadmium Plated Except Bore Sealed Type Seals (PTFE); Seal Retainers (CRES) EN2030 / / AISI 440C Cadmium Plated Except Bore Sealed Type Seals (PTFE); Seal Retainers (CRES) Technical Specification SAE AS7949 Type Δ r 2 mp No R Static Radial mm Inch mm Inch mm Inch kn lbs g lbs DW4 K to to to to DW4 K to to to to DW to to to to DW to to to to DW to to to to DW to to to to Angle G DW 5 R L KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 77

40 Rolling-Element s Rolling-Element s NSA8124 Self-Aligning Full Complement Double Row NSA8124 d Δ dmp D Δ Dmp Axial Play (max.) Static Radial Static Axial mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to mm Inch mm Inch kn lbs kn lbs g lbs to to to to to to to to to to to to B Δ Bmp C Δ Cmp d 1 mm Inch mm Inch mm Inch mm Inch mm Inch NSA8124 C Material 04 No EN2031 / AISI E52100 Cadmium Plated Except Bore C EN2030 / AISI 440C Cadmium Plated Except Bore Sealed Type Lubrication NATO G 354 / MIL-PRF Technical Specification SAE AS7949 r Δ rmp Starting Torque (max.) Swivelling Torque (max.) NSA8124 C 04 mm Inch mm Inch Ncm In.-lbs Ncm In.-lbs to to to to to to to to to to to to KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 79

41 Rolling-Element s Rolling-Element s EN3053 / EN3054 / EN3055 Self-Aligning Single Row Full Complement Spherical Rollers EN3053 / EN3054 / EN3055 d Δ dmp D Δ Dmp B Δ Bmp Starting Torque (max.) Static Radial mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Ncm In.-lbs mm Inch kn lbs g lbs to to to to to to to to to to to to to to to to C Δ Cmp d 1 r Δ rmp mm Inch mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to EN3053 A Grease Type A: NATO G 354 / MIL-PRF B: NATO G 395 / MIL-PRF EN3053 A 12 P 1 12 P Protection Shielded (CRES) 1 Dimensional Variation EN3053 Series EN2031 / / AISI E52100 EN3054 Series EN2031 / / AISI E52100 Cadmium Plated Except Bore EN3055 Series EN2030 / / AISI 440C Technical Specification EN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 81

42 Rolling-Element s Rolling-Element s EN3290 / EN3291 / EN3292 Self-Aligning Single Row Full Complement Spherical Rollers EN3290 / EN3291 / EN3292 d Δ dmp D Δ Dmp B Δ Bmp Axial Play R / (max.) Axial Play K / (max.) Static Axial Static Radial mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch kn lbs mm Inch g lbs C Δ Cmp d 1 r Δ rmp mm Inch mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to E Starting Torque P R K Ncm In.-lbs Ncm In.-lbs mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to EN3290 EN3290 A K 20 E A Grease Type A: NATO G 354 / MIL-PRF B: NATO G 395 / MIL-PRF K Radial / Axial Play K: Normal R: Reduced 20 E Protection E: Sealed P: Shielded (CRES) EN3290 Series EN2031 / / AISI E52100 EN3291 Series EN2031 / / AISI E52100 Cadmium Plated Except Bore EN3292 Series EN2030 / / AISI 440C Technical Specification EN3280 / EN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 83

43 Rolling-Element s Rolling-Element s DSR / NSA8110 Self-Aligning Single Row Spherical Rollers DSR / NSA8110 d Δ dmp D Δ Dmp B Δ Bmp mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch C Δ Cmp d 1 r 1 x 45 r 2 x mm Inch mm Inch mm Inch mm Inch mm Inch Starting Torque Max. Sealed (max.) Static Radial α DSR P Protection P: Sealed No : Shielded (CRES) 4 G Grease Type G: Grease NATO G 354 / MIL-PRF No : NATO G 395 / MIL-PRF Material No EN2031 / / AISI E52100 Cadmium Plated Except Bore EN2030 / / AISI 440 C Cadmium Plated Except Bore Technical Specification SAE AS7949 NSA Material EN2030 / / AISI 440C Cadmium Plated Except Bore Sealed Type Seals (PTFE); Seal Retainers (CRES) Lubrication NATO G 354 / MIL-PRF Technical Specification SAE AS7949 Ncm In.-lbs mm Inch kn lbs g lbs DSR P 4 G NSA KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 85

44 Spherical s Product Overview Spherical s 86

45 Spherical s Product Overview Spherical s Spherical s Table of Contents Product Page Fraslip Fabric Liner EN4613 R EN4613 S EN4614 R EN4614 S FMGB FMGN FMGS FMGU EN2584 / FRE EN2585 / FLR EN EN EN EN FRA Swaged Metal to Metal EN EN4265 / EN EN EN FMGB FMGN FMGS FMGV Product Page Loader Slot Metal to Metal EN EN GE...D GE...DN GL / GLD KAron Molded Liner KR-CN / AS KR-CNG / AS KR-CW / AS KR-CWG / AS KR-CN/4 / AS81820/ KR-CNG/1 / AS81820/ KR-CW/2 / AS81820/ KR-CWG/3 / AS81820/ KR-CE (Extended Inner Race / High Misalignment) KR-CEG (Extended Inner Race / High Misalignment with Groove) KR-C Miniature

46 Spherical s Fraslip Fabric Liner Spherical s EN4613 R Self-Lubricating CRES With Mounting Grooves d Δ dmp D Δ Dmp B ±0.130 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch d 2 P r 2 α (min.) d 1 (min.) ß mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to C Starting Torque Starting Torque Static Radial Static Axial Radial Normal / N Reduced / X Dynamic Load Nm In.-lbs Nm In.-lbs kn lbs kn lbs kn lbs g lbs to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to EN4613 R Type of Mounting R: With Mounting Grooves EN4613 R 03 N T A 03 N Starting Torque / Low Breakaway Torque Option N: Normal X: Reduced T Surface Treatment T: Passivated P: Outer Ring Cadmium Plated A Bonded Liner Technology Liner per EN2755 / SAE AS81820 Outer Ring EN3161 / / 17-4 PH H1150 Inner Ring EN2030 / / AISI 440C Technical Specification EN2755 EN4613 R 90 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 91

47 Spherical s Fraslip Fabric Liner Spherical s EN4613 S Self-Lubricating CRES Chamfered Outer Race Without Mounting Grooves d Δ dmp D Δ Dmp B ±0.13 ±0.005 mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Starting Torque Starting Torque d 1 (min.) r 1 Normal / N Reduced / X mm Inch mm Inch Nm In.-lbs Nm In.-lbs to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to 2.83 C α Static Radial Static Axial Radial (min.) Dynamic Load kn lbs kn lbs kn lbs g lbs EN4613 S Type of Mounting S: Without Mounting Grooves EN4613 S 03 N T A 03 N Starting Torque N: Normal X: Reduced T Surface Treatment T: Passivated P: Outer Ring Cadmium Plated A Bonded Liner Technology Liner EN2755 / SAE AS81820 Outer Ring EN3161 / / 17-4 PH H1150 Inner Ring EN2030 / / AISI 440C Technical Specification EN2755 EN4613 S 92 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 93

48 Spherical s Fraslip Fabric Liner Spherical s EN4614 R Self-Lubricating CRES With Mounting Grooves d Δ dmp D Δ Dmp B ±0.13 ±0.005 mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch A d 2 P d 1 (min.) ß mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to A to to to to to to to to to to to to to to to to to to to to to to r 2 α (min.) C Starting Torque Starting Torque Static Radial Static Axial Radial Normal / N Reduced / X Dynamic Load Nm In.-lbs Nm In.-lbs kn lbs kn lbs kn lbs g lbs to to to to to to to to to to to to to to to to to to to to A 0.11 to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to EN4614 R Type of Mounting R: With Mounting Grooves EN4614 R 03 N T A 03 N Starting Torque / Low Breakaway Torque Option N: Normal X: Reduced T Surface Treatment T: Passivated P: Outer Ring Cadmium Plated A Bonded Liner Technology Liner per EN2755 / SAE AS81820 EN4614 R Outer Ring EN3161 / / 17-4 PH H1150 Inner Ring EN2030 / / AISI 440C Technical Specification EN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 95

49 Spherical s Fraslip Fabric Liner Spherical s EN4614 S Self-Lubricating CRES Chamfered Outer Race Without Mounting Grooves d Δ dmp D Δ Dmp B mm Inch mm Inch mm Inch mm Inch mm Inch C d r 1 1 x 45 ±0.13 ±0.005 (min.) Starting Torque Normal / N mm Inch mm Inch mm Inch Nm In.-lbs to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to α (min.) Starting Torque Static Radial Static Axial Radial Reduced / X Dynamic Load Nm In.-lbs kn lbs kn lbs kn lbs g lbs 03 0 to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to EN4614 S Type of Mounting S: Without Mounting Grooves EN4614 S 03 N T A 03 N Low Breakaway Torque Option N: Normal X: Reduced T Surface Treatment T: Passivated P: Outer Ring Cadmium Plated A Bonded Liner Technology Liner per EN2755 / SAE AS81820 EN4614 S Outer Ring EN3161 / / 17-4 PH H1150 Inner Ring EN2030 / / AISI 440C Technical Specification EN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 97

50 Spherical s Fraslip Fabric Liner Spherical s FMGB....4 Self-Lubricating CRES Dimensions According to AS14102 / d Δ dmp D Δ Dmp B ±0.127 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch A d d 1 (min.) 2 P r 1 x r 2 r 2 mp mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch A C FMGB....4 Starting Torque Starting Torque Static Radial Static Axial α Normal / No Reduced / X (REF) Nm In.-lbs Nm In.-lbs kn lbs kn lbs g lbs to to max max to to max max to to max. 1.0 max to to max. 1.0 max to to max. 1.0 max A to to max. 1.0 max to to max. 1.0 max to to max. 1.0 max to to max. 1.0 max to to max. 1.0 max to to max. 2.0 max to to max. 2.0 max to to to to to to to to to to to to to to to to FMGB Number M Type of Mounting M: With Mounting Grooves None: Without Mounting Grooves FMGB 5.4 M C P X 5.4 C Ball Material None: EN2030 / / AISI 440C C: 13-8Mo H1000 P Surface Treatment No : None P: Outer Ring Cadmium Plated X Starting Torque None: Normal X: Reduced Liner per SAE AS81820 Outer Ring EN3161 / / 17-4PH H1150 Technical Specification SAE AS KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 99

51 Spherical s Fraslip Fabric Liner Spherical s FMGN....4 Self-Lubricating CRES Dimensions According to AS14101 d Δ dmp D Δ Dmp B ±0.127 ±0.005 mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch M d 1 (min.) d P mm Inch mm Inch mm Inch mm Inch mm Inch M r 2 Δ r 2 mp C α (REF) Starting Torque Starting Torque Static Radial Static Axial Normal / No Reduced / X Nm In.-lbs Nm In.-lbs kn lbs kn lbs g lbs to to max max to to max max M 0.03 to to max max to to max max to to max max to to max max to to max max to to max max to to max max to to max max to to max max to to to to to to to to to to to to to to to to FMGN Number 5.4 FMGN 5.4 C P X C Ball Material None: EN2030 / / AISI 440C C: 13-8Mo H1000 P Surface Treatment No : None P: Outer Ring Cadmium Plated X Starting Torque None: Normal X: Reduced Liner per SAE AS81820 Outer Ring EN3161 / / 17-4PH H1150 Technical Specification SAE AS81820 FMGN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 101

52 Spherical s Fraslip Fabric Liner Spherical s FMGS....4 Self-Lubricating CRES According to AS14104 d Δ dmp D Δ Dmp B mm Inch mm Inch mm Inch mm Inch mm Inch C d 1 r 1 x 45 r 4 x 45 ±0.127 ±0.005 (min.) mm Inch mm Inch mm Inch mm Inch α (REF) FMGS....4 Starting Torque Starting Torque Static Radial Static Axial Normal / No Reduced / X Nm In.-lbs Nm In.-lbs kn lbs kn lbs g lbs to to max max to to max max to to max max to to max max to to max max to to max max to to max max to to max max to to max max to to max max to to max max to to to to to to to to FMGS Number 5.4 FMGS 5.4 C P X C Ball Material None: EN2030 / / AISI 440C C: 13-8Mo H1000 P Surface Treatment No : None P: Outer Ring Cadmium Plated X Starting Torque None: Normal X: Reduced Liner per SAE AS81820 Outer Ring EN3161 / / 17-4PH H1150 Technical Specification SAE AS KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 103

53 Spherical s Fraslip Fabric Liner Spherical s FMGU....4 Self-Lubricating CRES FMGU....4 d Δ dmp D Δ Dmp B ±0.127 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch A A A A A A C Static Radial Static Axial Starting Torque kn lbs kn lbs Nm In.-lbs g lbs to to A to to to to A to to to to A to to to to A to to to to to to A to to to to A to to to to to to to to α (REF) ß d 1 d 2 P r 1 x 45 r 2 r 4 x ±0.120 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch A A A A A A FMGU.4 Number of Series 8.4 FMGU 8.4 M A P M Type of Mounting None: Without Mounting Grooves M: With Mounting Grooves P Surface Treatment No : None P: Outer Ring Cadmium Plated Liner per SAE AS81820 Outer Ring EN3161 / / 17-4PH H1150 Inner Ring EN2030 / / AISI 440C Technical Specification SAE AS KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 105

54 Spherical s Fraslip Fabric Liner Spherical s EN2584 / FRE Self-Lubricating CRES d Δ dmp D Δ Dmp B ±0.100 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch d 2 r 4 x 45 d 1 r mm Inch mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to P C r 1 x 45 Starting Torque Static Radial Static Axial EN2584 / FRE mm Inch Nm In.-lbs kn lbs kn lbs g lbs to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to EN2584 Number of Series 10 A Bonded Liner Technology EN2584 R 10 P A R Type of Mounting R: Without Mounting Grooves S: With Mounting Grooves P Surface Treatment No : None T: Passivated P: Chromium Plated Ball FRE Number of Series 10 FRE 10 R P R Type of Mounting R: With Mounting Grooves S: Without Mounting Grooves P Surface Treatment No : None P: Chromium Plated Ball α (min.) ß Liner per EN2755 Outer Ring EN3161 / / 17-4PH H1150 Inner Ring EN2030 / / AISI 440C Technical Specification EN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 107

55 Spherical s Fraslip Fabric Liner Spherical s EN2585 / FRL Self-Lubricating CRES EN2585 / FRL d Δ dmp D Δ Dmp B ±0.100 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch d 1 d 2 r 1 x 45 r 2 r 4 x mm Inch mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to C P Starting Torque Static Radial Static Axial mm Inch Nm In.-lbs kn lbs kn lbs g lbs to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to EN A Bonded Liner Technology EN2585 R 10 P T A R Type of Mounting R: With Mounting Grooves S: Without Mounting Grooves P Surface Treatment No : None P: Chromium Plated Ball FRL Number of Series 10 FRL 10 R P R Type of Mounting R: With Mounting Grooves S: Without Mounting Grooves P Surface Treatment No : None P: Chromium Plated Ball α (min.) ß Liner per EN2755 Outer Ring EN3161 / / 17-4PH H1150 Inner Ring EN2030 / / AISI 440C Technical Specification EN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 109

56 Spherical s Fraslip Fabric Liner Spherical s EN3048 Self-Lubricating CRES B C d Δ dmp D Δ Dmp ±0.100 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch a a a a a d 1 (min.) d 2 P r 1 x mm Inch mm Inch mm Inch mm Inch mm Inch to to to to to to to to a to to to to to to to to a to to to to to to to to a to to to to to to to to a to to to to to to to to a to to to to to to to to to to to to to to to to to to to to r 4 x 45 α (min.) r Starting Torque Static Radial Static Axial mm Inch Nm In.-lbs kn lbs kn lbs g lbs to to to to a to to to to a to to to to a to to to to a to to to to a to to to to to to to to to to EN3048 R Type of Mounting R: With Mounting Grooves S: Without Mounting Grooves 12 P Surface Treatment Ball No : None P: Chromium Plated T Surface Treatment No : None T: Passivated A Bonded Liner Technology Liner per EN2755 Outer Ring EN3161 / / 17-4PH H1150 Inner Ring EN2030 / / AISI 440C Technical Specification 1 EN2755 Deviating Mounting EN3048 R 12 P T A 1 Groove Dimensions NOTE: little a means 1 EN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 111

57 Spherical s Fraslip Fabric Liner Spherical s EN4037 Self-Lubricating CRES (TYP) B C d Δ dmp D Δ Dmp ±0.100 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch P α ß Starting Torque Static Radial Static Axial mm Inch Nm In.-lbs kn lbs kn lbs g lbs to to to to to to to to to to to to to to to to to to to to EN4037 d 1 (min.) d 2 r 2 r 4 x 45 r 1 x 45 Δ r 1 mp mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch EN4037 EN4037 R 12 T R Type of Mounting R: With Mounting Grooves P: Without Mounting Grooves 12 T Surface Treatment No : None T: Passivated Liner per EN2755 Outer Ring EN3161 / / 17-4PH H1150 Inner Ring EN2030 / / AISI 440C Technical Specification EN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 113

58 Spherical s Fraslip Fabric Liner Spherical s EN4038 Self-Lubricating CRES B C d Δ dmp D Δ Dmp ±0.100 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch d 2 r 4 x 45 d 1 r 1 x 45 r mm Inch mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to α ß P Starting Torque Static Radial Static Axial mm Inch Nm In.-lbs kn lbs kn lbs g lbs to to to to to to to to to to to to to to to to to to to to to to to to to to to to EN4038 EN4038 R 10 P R Type of Mounting R: With Mounting Grooves S: Without Mounting Grooves 10 P Surface Treatment No : None T: Passivated P: Chromium Plated Ball Liner per EN2755 Outer Ring EN3161 / / 17-4PH H1150 Inner Ring EN2030 / / AISI 440C Technical Specification EN2755 EN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 115

59 Spherical s Fraslip Fabric Liner Spherical s EN4039 Self-Lubricating CRES B C d Δ dmp D Δ Dmp ±0.100 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch P Starting Torque Static Radial Static Axial mm Inch Nm In.-lbs kn lbs kn lbs g lbs to to to to to to to to to to to to to to to to to to to to to to to to to to EN4039 d 1 (min.) d 2 r 2 r 4 x 45 r 1 x mm Inch mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to to to α ß ±0.5 EN4039 EN4039 R 10 T R Type of Mounting R: With Mounting Grooves S: Without Mounting Grooves 10 T Surface Treatment No : None T: Passivated Liner per EN2755 Outer Ring EN2539 / / 17-4PH H1150 Inner Ring EN2030 / / AISI 440CC Technical Specification EN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 117

60 Spherical s Fraslip Fabric Liner Spherical s FRA Self-Lubricating CRES d Δ dmp D Δ Dmp B ±0.100 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch / / C Starting Torque Static Radial Static Axial Nm In.-lbs kn lbs kn lbs g lbs to to to to / to to to to / to to to to to to to to to to to to to to to to FRA d 1 (min.) d 2 r 1 P mm Inch mm Inch mm Inch mm Inch mm Inch / / r 2 α FRA Number of Series FRA 12 R 12 R Type of Mounting None: Without Mounting Grooves R: With Mounting Grooves Liner per EN2755 / SAE AS81820 Outer Ring EN3161 / / 17-4 PH H1150 Inner Ring EN2030 / / AISI 440C Technical Specification EN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 119

61 Spherical s Swaged Metal to Metal Spherical s EN2335 Greased CRES EN2335 EN2335 d Δ dmp D Δ Dmp B ±0.100 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch a a a a a C d 1 (min.) d 2 P r 2 r 4 x 45 r mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch a a a a a little a means: 1 added to the end of the part designation EN2335 continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 121

62 Spherical s Swaged Metal to Metal Spherical s Swaged Metal to Metal EN2335 EN2335 N P Axial Play N Axial Play P mm Inch mm Inch mm Inch mm Inch max max max max to to to to max max max max to to to to max max max max to to to to max max max max to to to to max max max max to to to to max max max max to to to to max max max max to to to to a max max max max to to to to max max max max to to to to a max max max max to to to to max max max max to to to to a max max max max to to to to max max max max to to to to a max max max max to to to to max max max max to to to to a max max max max to to to to max max max max to to to to max max max max to to to to max max max max to to to to max max max max to to to to max max max max to to to to Static Radial Static Axial kn lbs kn lbs g lbs a a a a a α (min.) EN2335 A Grease Type A: NATO G 354 /MIL-PRF B: NATO G 395 /MIL-PRF P Radial / Axial Play N: Normal P: Reduced 15 E Type of Lubrication Grooves and Holes E, F, G: See R Type of Mounting NS: Without Mounting Grooves R: With Mounting Grooves T Surface Treatment Inner Ring No : None T :Passivated 1 Deviating Mounting Groove Dimensions Outer Ring EN2136 / / AISI 431 Inner Ring EN2030 / / AISI 440C Technical Specification EN2337 / Outer Ring Raceway Treated with MoS2 Dry Film Lubrication 04 to 12 Without Lubrication Grooves and Holes EN2335 A P 15 E R T KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 123

63 Spherical s Swaged Metal to Metal Spherical s EN4265 / EN4266 Greased CRES d Δ dmp D Δ Dmp B mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch A C d 1 (min.) d 2 r 1 x 45 P α (min.) EN4265 / EN4266 mm Inch mm Inch mm Inch mm Inch A ß ±0.5º EN4265 / EN4266 continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 125

64 Spherical s Swaged Metal to Metal Spherical s Swaged Metal to Metal EN4265 / EN4266 EN4265 / EN4266 R 2 Axial Play Normal / N Axial Play Reduced / P Static Radial Static Axial Normal / N Reduced / P mm Inch mm Inch mm Inch kn lbs to to to to to to to to to to A to to to to to to to to to to to to to to to to to to to to to to kn lbs g lbs mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to A to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to EN4266 A Grease Type A: NATO G 354 / MIL-PRF B: NATO G 395 / MIL-PRF EN4266 A P 16 E R P Radial / Axial Play N: Normal P: Reduced 16 E Type of Lubrication Grooves and Holes E, F, G: See R Type of Mounting S: Without Mounting Grooves R: With Mounting Grooves Outer Ring EN3161 / / 17-4 PH H1150 EN4266 / EN2133 Cadmium Plated Inner Ring EN2030 / / AISI 440CC Technical Specification EN2337 / Outer Ring Raceway Treated with MoS 2 Dry Film Lubrication 126 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 127

65 Spherical s Swaged Metal to Metal Spherical s EN6046 Greased CRES EN6046 d Δ dmp D Δ Dmp B mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch d 2 P r 1 x mm Inch mm Inch mm Inch mm Inch g lbs to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to r 2 α (min.) C ß d 1 (min.) Normal / N Normal / P Axial Play Normal / N (max.) Axial Play Reduced / P (max.) Static Radial mm Inch mm Inch mm Inch mm Inch kn lbs to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to EN6046 A Grease Type A: NATO G 354 / MIL-PRF B: NATO G 395 / MIL-PRF EN6046 A P 16 E R Z P Radial / Axial Play N: Normal P: Reduced 16 E Type of Lubrication Grooves and Holes E, F, G: See Schematic Drawing R Type of Mounting Grooves S: Without Mounting Grooves R: With Mounting Grooves Z Surface Treatment None: Passivated Z: Outer Ring Cadmium Plated Outer Ring EN3161 / / 17-4 PH H1150 Inner Ring EN2030 / / AISI 440C Technical Specification EN2337 / Outer Ring Raceway Treated with MoS2 Dry Film Lubrication 128 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 129

66 Spherical s Swaged Metal to Metal Spherical s EN6097 Greased CRES EN6097 d Δ dmp D Δ Dmp B C d mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Normal / N Reduced / X Axial Play Normal / N (max.) Axial Play Reduced / X (max.) mm Inch mm Inch mm Inch mm Inch g lbs to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to d 2 P r 1 x 45 r 2 r 4 x 45 P mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch α ß Static Radial (code E only) Static Axial (code E only) kn lbs kn lbs EN6097 S Type of Mounting S: Without Mounting Grooves R: With Mounting Grooves 06 EN6097 S 06 N T E B E N Radial / Axial Play N: Normal X: Reduced T Surface Treatment T: Passivated P: Outer Ring Cadmium Plated E Type of Ball ID E, D: See B Grease Type A: MIL-PRF / NATO G 354 B: MIL-PRF / NATO G 395 E Type of Lubrication Grooves and Holes E, F, G: See Schematic Outer Ring EN3161 / / 17-4 PH H1150 Inner Ring EN3020 / / AISI 440C Technical Specification EN2337 / Outer Ring Raceway Treated with MoS 2 Dry Film Lubrication 130 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 131

67 Spherical s Swaged Metal to Metal Spherical s FMGB....3 Greased CRES d Δ dmp D Δ Dmp B mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch C d 1 (min.) Axial Play reduced 2 / A Axial Play reduced 3 / AX (max.) Static Radial Static Axial FMGB....3 mm Inch mm Inch kn lbs kn lbs g lbs to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to d 2 P r 2 Axial Play normal (max.) Axial Play reduced 1 / X (max.) mm Inch mm Inch mm Inch mm Inch mm Inch α FMGB Number 6 FMGB 6.3 M AX.6.3 Material See Materials on Right M Type of Mounting None: Without Mounting Grooves M: With Mounting Grooves AX Axial Play None: Normal, X: Reduced 1, A: Reduced 2, AX: Reduced 3.6 Outer Ring Raceway Treated With MoS 2 Dry Film Lubrication Outer Ring / 17-4 PH H1025 Inner Ring EN2030 / / AISI 440C Lubrication Grease per NATO G354 / MIL-PRF Technical Specification SAE AS KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 133

68 Spherical s Swaged Metal to Metal Spherical s FMGN....1 Greased Bronze / Steel / CRES Dimensions According to AS21154 FMGN....1 d Δ dmp D Δ Dmp B Δ Bmp C mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Δ Cmp d 1 (min.) d 2 P r 2 reduced 1 / A mm Inch mm Inch mm Inch mm Inch mm Inch 03 ±0.127 ± to to ±0.127 ± to to ±0.127 ± to to ±0.127 ± to to ±0.127 ± to to ±0.127 ± to to ±0.127 ± to to ±0.127 ± to to ±0.127 ± to to ±0.127 ± to to ±0.127 ± to to ±0.127 ± to to ±0.127 ± to to ±0.127 ± to to ±0.127 ± to to FMGN....1 continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 135

69 Spherical s Swaged Metal to Metal Spherical s Swaged Metal to Metal FMGN.1 FMGN.1 reduced 2 / AX Axial Play reduced 1 / A (max.) Axial Play reduced 2 / AX (max.) mm Inch mm Inch mm Inch g lbs to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to α Static Radial Normal 1 3 kn lbs kn lbs kn lbs Static Axial Normal 1 3 kn lbs kn lbs kn lbs FMGN Number 5.1 Material O Type of Lubrication Grooves and Holes None: With Lubrication Grooves and Holes O: Without Lubrication Grooves and Holes AX Radial / Axial Play None: , A: Reduced 1, AX:Reduced 2.6 Outer Ring Raceway Treated With MoS 2 Dry Film Lubrication Outer Ring None: Aluminium Bronze UNS C63000 / Cadmium Plated.1: Heat Treatable Steel EN2214 / Cadmium Plated.3: CRES / 17-4 PH H1025 Inner Ring None: EN2031 / / AISI E52100 Chromium Plated.1: EN2031 / / AISI E52100 Chromium Plated.3: EN2030 / / AISI 440C Lubrication Grease per NATO G353 / MIL-G Technical Specification SAE AS8976 FMGN 5.1 O AX.6 USA: Kamatics Corporation 1330 Blue Hills Avenue Bloomfield, CT USA Tel: KSB@kaman.com Germany: RWG Germany GmbH Medbacher Weg 1 D Höchstadt a. d. Aisch Tel: +49 (91 93) RWG@kaman.com 136 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 137

70 Spherical s Swaged Metal to Metal Spherical s FMGS... Greased Bronze / Steel / CRES FMGS... d Δ dmp D Δ Dmp B Δ Bmp C mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Δ Cmp d 1 (min.) r 1 x 45 r 4 x 45 reduced 1 / A mm Inch mm Inch mm Inch mm Inch mm Inch 03 ±0.127 ± to to to to ±0.127 ± to to to to ±0.127 ± to to to to ±0.127 ± to to to to ±0.127 ± to to to to ±0.127 ± to to to to ±0.127 ± to to to to ±0.127 ± to to to to ±0.127 ± to to to to ±0.127 ± to to to to ±0.127 ± to to to to ±0.127 ± to to to to ±0.127 ± to to to to ±0.127 ± to to to to ±0.127 ± to to to to FMGS continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 139

71 Spherical s Swaged Metal to Metal Spherical s Swaged Metal to Metal FMGS... FMGS... reduced 2 / AX Axial Play reduced 1 / A (max.) Axial Play reduced 2 / AX (max.) mm Inch mm Inch mm Inch g lbs to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to α Static Axial Normal 1 3 kn lbs kn lbs kn lbs Static Radial Normal 1 3 kn lbs kn lbs kn lbs FMGS Number 05.1 Material O Type of Lubrication Grooves and Holes None: With Lubrication Grooves and Holes O: Without Lubrication Grooves and Holes AX Radial / Axial Play None: , A: Reduced 1, AX: Reduced 2.6 Outer Ring Raceway Treated With MoS 2 Dry Film Lubrication Outer Ring None: Aluminium Bronze UNS C63000 / Cadmium Plated.1: Heat Treatable Steel EN2214 / Cadmium Plated.3: CRES / 17-4 PH H1025 Inner Ring None: EN2031 / / AISI E52100 Chromium Plated.1: EN2031 / / AISI E52100 Chromium Plated.3: EN2030 / / AISI 440C Lubrication Grease per NATO G353 / MIL-G Technical Specification MIL-B-8976 FMGS 05.1 O AX KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 141

72 Spherical s Swaged Metal to Metal Spherical s FMGV....3 Greased CRES FMGV....3 d Δ dmp D Δ Dmp B mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch C Axial Play (max.) Static Radial Static Axial mm Inch mm Inch kn lbs kn lbs g lbs to to to to to to to to to to to to to to to to to to to to to to d 1 d 2 P r 1 x 45 r 2 α ß mm Inch mm Inch mm Inch mm Inch mm Inch FMGV Number of Series 3.3 M With Mounting Grooves FMGV 3.3 M T T Outer Ring Raceway Treated With MoS 2 Dry Film Lubrication FMGV Number of Series 3.3 FMGV Outer Ring Raceway Treated With MoS 2 Dry Film Lubrication Outer Ring / 17-4PH H1025 Inner Ring EN2030 / / AISI 440C Lubrication Grease NATO G 354 / MIL-PRF Technical Specification SAE AS KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 143

73 Spherical s Loader Slot Metal to Metal Spherical s EN2336 Greased Loader Slot Type Carbon Steel EN2336 d Δ dmp D Δ Dmp B Δ Bmp α mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch C Δ Cmp d 1 (min.) r 1 x 45 mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to EN2336 continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 145

74 Spherical s Loader Slot Metal to Metal Spherical s Loader Slot Metal to Metal EN2336 EN2336 r 4 x 45 N P Axial Play N mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to Axial Play P Static Radial Static Axial mm Inch kn lbs kn lbs g lbs to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to EN2336 A Grease Type A: NATO G 354 / MIL-PRF B: NATO G 395 / MIL-PRF P Radial / Axial Play N: Normal P: Reduced EN2336 A P 15 E 15 E Type of Lubrication Grooves and Holes E, F, G: See Schematic Drawing Outer Ring EN2031 / / AISI E52100; HRc Inner Ring EN2031 / HRc / / AISI E52100; HRc Axial Load In Opposite Direction of Loader Slot Technical Specification EN2337 / Outer Ring Raceway Treated with MoS 2 Dry Film Lubrication 05 to 12 Without Lubrication Grooves and Holes Radial Load At 90 to Loader Slot 146 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 147

75 Spherical s Loader Slot Metal to Metal Spherical s EN2588 Greased Loader Slot Type CRES EN2588 d Δ dmp D Δ Dmp B Δ Bmp α mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch d 1 C (min.) r 1 x 45 Δ r 1 mp r 4 x 45 Δ r 4 mp α mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch EN2588 continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 149

76 Spherical s Loader Slot Metal to Metal Spherical s Loader Slot Metal to Metal EN2588 EN2588 N / (max.) P / (max.) Axial Play N mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to Axial Play P Static Radial Static Axial mm Inch kn lbs kn lbs g lbs to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to EN2588 A Grease Type A: NATO G 354 / MIL-PRF B: NATO G 395 / MIL-PRF P Radial / Axial Play N: Normal P: Reduced EN2588 A P 15 E 15 E Type of Lubrication Grooves and Holes E, F, G: See Schematic Drawing Outer Ring EN2030 / / AISI 440C; HRc 58 min. Inner Ring EN2030 / / AISI 440C; HRc Axial Load In Opposite Direction of Loader Slot Technical Specification EN2337 / Outer Ring Raceway Treated with MoS 2 Dry Film Lubrication 05 to 12 Without Lubrication Grooves and Holes Radial Load At 90 to Loader Slot 150 KAMAN Specialty s and Engineered Products 151 KAMAN Specialty s and Engineered Products

77 Spherical s Loader Slot Metal to Metal Spherical s GE D Loader Slot Type Carbon Steel GE...D d Δ dmp D Δ Dmp B Δ Bmp mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch No Lubrication Grooves Available SS SS SS SS SS SS SS SS SS SS SS SS C d (min.) r 1 x 45 Δ r 1 mp α mm Inch mm Inch mm Inch mm Inch to to No to to Lubrication to to Grooves to to Available to to to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to GE...D continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 153

78 Spherical s Loader Slot Metal to Metal Spherical s Loader Slot Metal to Metal GE D GE D r 4 x 45 Δ r 4 mp 1 mm Inch mm Inch mm Inch to to to to No Lubrication Grooves Available to to to to to to to to to to to to to to to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to Static Radial mm Inch kn lbs to to No to to Lubrication to to Grooves to to Available to to to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to GE D Number of Series 17 GE 17 D SS.1 T SS Lubrication Grooves and Holes SS: With Lubrication Grooves and Holes (See ) No : None.1.1: Reduced.2: Normal T for Dry Lubrication None: Phosphated per LN T: Outer Ring Raceway Treated With MoS 2 Dry Film Lubrication Outer Ring EN2031 / / AISI E52100; HRc Inner Ring EN2031 / / AISI E52100; HRc 61 min. Technical Specification DIN / LN 9193 Under Radial Load the Loader Slot Shall Remain at 90 to the Load Direction 154 KAMAN Specialty s and Engineered Products 155 KAMAN Specialty s and Engineered Products

79 Spherical s Loader Slot Metal to Metal Spherical s GE DN Loader Slot Type CRES GE...DN d Δ dmp D Δ Dmp B Δ Bmp mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch No Lubrication Grooves Available SS SS SS SS SS SS SS SS SS SS SS SS C d (min.) r 1 x 45 Δ r 1 mp α mm Inch mm Inch mm Inch mm Inch to to No to to Lubrication to to Grooves to to Available to to to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to GE...DN continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 157

80 Spherical s Loader Slot Metal to Metal Spherical s Loader Slot Metal to Metal GE DN GE DN r 4 x 45 Tol 1 mm Inch mm Inch mm Inch to to to to No Lubrication Grooves Available to to to to to to to to to to to to to to to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to Static Radial mm Inch kn lbs to to No to to Lubrication to to Grooves to to Available to to to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to SS to to GE DN Number of Series 17 GE 17 DN SS.1 T SS Lubrication Grooves and Holes SS: With Lubrication Grooves and Holes (See ) No : None.1.1: Reduced.2: Normal T for Dry Lubrication None: Treated With MoS 2 Paste T: Outer Ring Raceway Treated With MoS 2 Dry Film Lubrication Outer Ring EN2030 / / AISI 440C; HRc 58 min. Inner Ring EN2030 / / AISI 440C; HRc Technical Specification DIN / LN 9193 Under Radial Load the Loader Slot Shall Remain at 90 to the Load Direction 158 KAMAN Specialty s and Engineered Products 159 KAMAN Specialty s and Engineered Products

81 Spherical s Loader Slot Metal to Metal Spherical s GL / GLD Loader Slot Type CRES / Carbon Steel GL / GLD d Δ dmp D Δ Dmp B Δ Bmp mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch / / / / d 1 C Δ Cmp (min.) r 1 x 45 Δ r 1 mm Inch mm Inch mm Inch mm Inch mm Inch g lbs / / / / GL / GLD continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 161

82 Spherical s Loader Slot Metal to Metal Spherical s Loader Slot Metal to Metal GL / GLD GL / GLD Axial Play r 4 x 45 Δ r 4 Max. GL mm Inch mm Inch mm Inch to to to to to to / to to to to / to to to to to to to to to to to to to to to to to to to to / to to to to to to / to to to to to to to to to to to to Axial Play Max. GLD Static Radial GL mm Inch kn lbs to to to to to to / to to to to / to to to to to to to to to to to to to to to to to to to to / to to to to to to / to to to to to to to to to to to to α GL GLD (Increased Axial Play) Number of Series GL Material None: EN2031 / / AISI E : EN2030 / / AISI 440C Lubrication NATO G 354 / MIL-PRF Technical Specification DIN / LN 9193 Under Radial Load the Loader Slot Shall Remain at 90 to the Load Direction 162 KAMAN Specialty s and Engineered Products 163 KAMAN Specialty s and Engineered Products

83 Spherical s KAron Molded Liner Spherical s KR-CN Series / AS14104 Narrow, Chamfered Outer Race -65º F to +325º F / -54º C to +163º C KR3 to KR16 Qualified to SAE AS81820 with KAron B Liner KAron BX AS Type A B D W H O Numbers Shoulder Dia (min.) Ball Dia (Ref) Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm KR3-CN KR4-CN KR5-CN KR6-CN KR7-CN KR8-CN KR9-CN KR10-CN KR12-CN KR14-CN KR16-CN KR20-CN Size Nominal Bore T.010 OD Oversize U.020 OD Oversize Inch mm Inch mm Inch mm Size KR-CN Series / AS14104 No-Load Rotational Breakaway Torque Standard ( K ) Type In.-lbs Nm In.-lbs Nm 3 & to to to to to to to to to to to to Size Clearances ( K ) Type Only Radial (max.) Axial (max.) Inch mm Inch mm 3 & Numbers F Chamfer x 45º Radial Dynamic Load Rating (See Note 1) Radial Static Limit Load (See Note 1) Axial Static Limit Load (See Note 1) Approx Qº Approx Misalignment Inch mm lbs Kn lbs Kn lbs Kn lbs g KR3-CN / / KR4-CN / / KR5-CN / / KR6-CN / / KR7-CN / / KR8-CN / / KR9-CN / / KR10-CN / / KR12-CN / / KR14-CN / / KR16-CN / / KR20-CN / / Note 1 Load Ratings Shown are with KAron B and BX Liner Systems KR-CN Series / AS14104 AS14104 KR KAron Spherical Prefix ID (ID in 1/16 increments) CN Narrow Chamfered Outer Race KR 6 - CN B P W K T Y B KAron B liner (See Table 2 for liner options) P Cadmium Plated OD per AMS- QQ-P-416 Option W Chrome Plated Ball OD Option K Low Breakaway Torque Option T.010 Oversize OD Option Y PH13-8Mo Ball option (440C no letter) See KR-CN/4 Series for Lined Bore Liner See Table 2 for liner options Outer Race 17-4PH (AMS5643) H1150 Cond. Ball 440C (AMS5630) HRC 55/62 or PH13-8Mo (AMS5629) H1000 Cond. Passivate PH13-8Mo per AMS2700, Chrome option per AMS2460 Class 2 ( inch thick). * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 164 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 165

84 Spherical s KAron Molded Liner Spherical s KR-CNG Series / AS14101 Narrow, Grooved Outer Race -65º F to +325º F / -54º C to +163º C KR3 to KR16 Qualified to SAE AS81820 with KAron B Liner KAron BX AS81820 Type A KR-CNG Series / AS14101 Size Nominal Bore T.010 OD Oversize U.020 OD Oversize Inch mm Inch mm Inch mm ,5A Size No-Load Rotational Breakaway Torque Standard ( K ) Type In.-lbs Nm In.-lbs Nm 3 & to to to to to to to to to to to to Size Clearances ( K ) Type Only Radial (max.) Axial (max.) Inch mm Inch mm 3 & Numbers Groove Dia / E Radial Dynamic Load Rating (See Note 1) Radial Static Limit Load (See Note 1) Axial Static (See Note 1) Approx Qº Approx Misalignment Inch mm lbs Kn lbs Kn lbs Kn lbs g KR3-CNG KR4-CNG KR5-CNG KR5A-CNG KR6-CNG KR7-CNG KR8-CNG KR9-CNG KR10-CNG KR12-CNG KR14-CNG KR16-CNG KR20-CNG B D W H O Numbers Shoulder Dia (min.) Ball Dia (Ref) Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm KR3-CNG KR4-CNG KR5-CNG KR5A-CNG KR6-CNG KR7-CNG KR8-CNG KR9-CNG KR10-CNG KR12-CNG KR14-CNG KR16-CNG KR20-CNG KR-CNG Series / AS14101 AS14101 KR KAron Spherical Prefix ID (ID in 1/16 increments) CN Narrow Outer Race G Grooved Outer Race KR 6 - CN G B P W K T Y B KAron B liner (See Table 2 for liner options) P Cadmium Plated OD per AMS- QQ-P-416 Option E Zinc-Nickel Plated Option OD per AMS2417 W Chrome Plated Ball OD Option K Low Breakaway Torque Option T.010 Oversize OD Option Y PH13-8Mo Ball option (440C no letter) See KR-CNG/1 Series for Lined Bore Liner See Table 2 for liner options Outer Race 17-4PH (AMS5643) H1150 Cond. Ball 440C (AMS5630) HRC 55/62 or PH13-8Mo (AMS5629) H1000 Cond. Passivate PH13-8Mo per AMS2700, Chrome option per AMS2460 Class 2 ( inch thick). Note 1 Load Ratings Shown are with KAron B and BX Liner Systems * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 166 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 167

85 Spherical s KAron Molded Liner Spherical s KR-CW Series / AS14102 Wide, Grooved Outer Race -65º F to +325º F / -54º C to +163º C KAron B Qualified to SAE AS81820 KAron BX Qualified to SAE AS81820 Type A B D W H O Numbers Shoulder Dia (min.) Ball Dia (Ref) Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm KR3-CW KR4-CW KR5-CW KR6-CW KR7-CW KR8-CW KR9-CW KR10-CW KR12-CW KR14-CW KR16-CW KR20-CW T.010 OD Oversize U.020 OD Oversize Nominal Size Bore Inch mm Inch mm Inch mm Size KR-CW Series / AS14102 (Ref) No-Load Rotational Breakaway Torque Standard ( K ) Type In.-lbs Nm In.-lbs Nm 3 & to to to to to to to to to to to to Size Clearances ( K ) Type Only Radial (max.) Axial (max.) Inch mm Inch mm 3 & Numbers F Chamfer x 45º Radial Dynamic Load Rating (See Note 1) Radial Static Limit Load (See Note 1) Axial Static Limit Load (See Note 1) Approx Qº Approx Misalignment Inch mm lbs Kn lbs Kn lbs Kn lbs g KR3-CW.015 / / º KR4-CW.015 / / º KR5-CW.015 / / º KR6-CW.020 / / º KR7-CW.020 / / º KR8-CW.020 / / º KR9-CW.020 / / º KR10-CW.020 / / º KR12-CW.030 / / º KR14-CW.030 / / º KR16-CW.030 / / º KR20-CW.030 / / º Note 1 Load Ratings Shown are with KAron B and BX Liner Systems KR-CW Series / AS14102 AS14102 KR KAron Spherical Prefix inch ID (ID in 1/16 inch increments) CW Chamfered Wide Outer Race KR 6 CW B P W K T Y B KAron B liner (See Table 2 for liner options) P Cadmium Plated OD per AMS-QQ- P-416 Option E Zinc-Nickel Plated Option OD per AMS2417 W Chrome Plated Ball OD Option K Low Breakaway Torque Option T.010 Oversize OD Option Y PH13-8Mo Ball option (440C no letter) See KR-CW/2 for Lined Bore Liner See Table 2 for liner options Outer Race 17-4PH (AMS5643) H1150 Cond. Ball 440C (AMS5630) HRC 55/62 or PH13-8Mo (AMS5629) H1000 Cond. Passivate PH13-8Mo per AMS2700, Chrome option per AMS2460 Class 2 ( inch thick). * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 168 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 169

86 Spherical s KAron Molded Liner Spherical s KR-CWG Series / AS14103 Wide, Grooved Outer Race -65º F to +325º F / -54º C to +163º C KR3 to KR16 Qualified to SAE AS81820 with KAron B Liner KAron BX AS Type A KR-CWG Series / AS14103 B D W H O Numbers Shoulder Dia (min.) Ball Dia (Ref) Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm KR3-CWG KR4-CWG KR5-CWG KR6-CWG KR7-CWG KR7A-CWG KR8-CWG KR9-CWG KR10-CWG KR12-CWG KR14-CWG KR16-CWG KR20-CWG Numbers Groove Dia / E Radial Dynamic Load Rating (See Note 1) Radial Static Limit Load (See Note 1) Axial Static (See Note 1) Approx Qº Approx Misalignment Inch mm lbs Kn lbs Kn lbs Kn lbs g KR3-CWG KR4-CWG KR5-CWG KR6-CWG KR7-CWG KR7A-CWG KR8-CWG KR9-CWG KR10-CWG KR12-CWG KR14-CWG KR16-CWG KR20-CWG Materials: Liner See Table 2 for liner options Outer Race 17-4PH (AMS5643) H1150 Cond. Ball 440C (AMS5630) HRC 55/62 or PH13-8Mo (AMS5629) H1000 Cond. Passivate PH13-8Mo per AMS 2700, Chrome option per AMS 2460 Class 2 ( thick). Note 1 Load Ratings Shown are with KAron B and BX Liner Systems Size Nominal Bore T.010 OD Oversize U.020 OD Oversize Inch mm Inch mm Inch mm A Size Clearances ( K ) Type Only No-Load Rotational Breakaway Torque Radial (max.) Axial (max.) Standard ( K ) Type Inch mm Inch mm In.-lbs Nm In.-lbs Nm 3 & to to to to to to to to to to to to Size P R Y Inch mm Inch mm Inch mm 3 & / S Ref KR-CWG Series / AS14103 AS14103 KR KAron Spherical Prefix ID (ID in 1/16 increments) CW Chamfered Wide Outer Race G Grooved Outer Race B KAron B liner (See Table 2 for liner options) KR 6 - CW G P Cadmium Plated OD per AMS- QQ-P-416 Option E Zinc-Nickel Plated Option OD per AMS2417 W Chrome Plated Ball OD Option K Low Breakaway Torque Option T inch Oversize OD Option Y PH13-8Mo Ball option (440C no letter) See KR-CWG/3 for Lined Bore B P W K T Y * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 170 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 171

87 Spherical s KAron Molded Liner Spherical s KR-CN / 4 Series / AS81820/4 Narrow, Chamfered Outer Race Lined Bore -65º F to +325º F / -54º C to +163º C KR4 to KR16 Qualified to SAE AS81820 with KAron B Liner B D W H Numbers Ball Dia (Ref) Inch mm Inch mm Inch mm Inch mm Inch mm KR3-CN/ KR4-CN/ KR5-CN/ KR6-CN/ KR7-CN/ KR8-CN/ KR9-CN/ KR10-CN/ KR12-CN/ KR14-CN/ KR16-CN/ KR20-CN/ Size Nominal Bore T.010 OD Oversize U.020 OD Oversize Inch mm Inch mm Inch mm Size KR-CN / 4 Series / AS81820/4 No-Load Rotational Breakaway Torque Standard ( K ) Type In.-lbs Nm In.-lbs Nm 3 & to to to to to to to to to to to to 0.22 Size Clearances ( K ) Type Only Radial (Max.) Axial (Max.) Inch mm Inch mm 3 & Numbers F Chamfer x 45º Radial Dynamic Load Rating (See Note 1) Radial Static Limit Load (See Note 1) Axial Static Limit Load (See Note 1) Approx Qº Approx Misalignment Inch mm lbs Kn lbs Kn lbs Kn lbs g KR3-CN/ / / KR4-CN/ / / KR5-CN/ / / KR6-CN/ / / KR7-CN/ / / KR8-CN/ / / KR9-CN/ / / KR10-CN/ / / KR12-CN/ / / KR14-CN/ / / KR16-CN/ / / KR20-CN/ / / Note 1 Load Ratings Shown are with KAron B Liner System KR-CN/4 Series / AS81820/4 AS81820/4 KR KAron Spherical Prefix inch ID (ID in 1/16 inch increments) CN Narrow Outer Race KR 6 - CN /4 B P W K T Y /4 KAron Lined Bore (ID) B KAron B liner (See Table 2 for liner options) P Cadmium Plated OD per AMS- QQ-P-416 Option E Zinc-Nickel Plated Option OD per AMS2417 W Chrome Plated Ball OD Option K Low Breakaway Torque Option T inch Oversize OD Option Y PH13-8Mo Ball option (440C no letter) Liner See Table 2 for liner options Outer Race 17-4PH (AMS 5643) H1150 Cond. Ball 440C (AMS5630) HRC 55/62 or PH13-8Mo CRES (AMS5629) Condition H1000, Passivate PH13-8Mo per AMS-2700 Chrome plate option per AMS 2460, Class 2 ( thick) * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 172 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 173

88 Spherical s KAron Molded Liner Spherical s KR-CNG / 1 Series / AS81820/1 Narrow, Grooved Outer Race Lined Bore -65º F to +325º F / -54º C to +163º C KR4 to KR16 Qualified to SAE AS81820 with KAron B Liner KR-CNG / 1 Series / AS81820/1 B D W H Numbers Ball Dia (Ref) Inch mm Inch mm Inch mm Inch mm Inch mm KR3-CNG/ KR4-CNG/ KR5-CNG/ KR6-CNG/ KR7-CNG/ KR8-CNG/ KR9-CNG/ KR10-CNG/ KR12-CNG/ KR14-CNG/ KR16-CNG/ KR20-CNG/ Numbers Groove Dia / E Radial Dynamic Load Rating (See Note 1) Radial Static Limit Load (See Note 1) Axial Static (See Note 1) Approx Qº Approx Misalignment Inch mm lbs Kn lbs Kn lbs Kn lbs g KR3-CNG/ KR4-CNG/ KR5-CNG/ KR6-CNG/ KR7-CNG/ KR8-CNG/ KR9-CNG/ KR10-CNG/ KR12-CNG/ KR14-CNG/ KR16-CNG/ KR20-CNG/ Materials: Liner See Table 2 for liner options Outer Race 17-4PH (AMS5643) H1150 Cond. Ball 440C (AMS5630) HRC 55/62 or PH13-8Mo (AMS5629) H1000 Cond. Passivate PH13-8Mo per AMS 2700, Chrome option per AMS 2460 Class 2 ( thick). Note 1 Load Ratings Shown are with KAron B Liner System Size Nominal Bore T.010 OD Oversize U.020 OD Oversize Inch mm Inch mm Inch mm Size Clearances ( K ) Type Only No-Load Rotational Breakaway Torque Radial (max.) Axial (max.) Standard ( K ) Type Inch mm Inch mm In.-lbs Nm In.-lbs Nm 3 & to to to to to to to to to to to to 0.23 Size P R Y Inch mm Inch mm Inch mm 3 & / S Ref KR-CNG / 1 Series AS81820/1 AS81820/1 KR KAron Spherical Prefix ID (ID in 1/16 increments) CN Narrow Outer Race G Grooved Outer Race /1 KAron Lined Bore (ID) B KAron B liner (See Table 2 for liner options) P Cadmium Plated OD per AMS- QQ-P-416 Option E Zinc-Nickel Plated Option OD per AMS2417 W Chrome Plated Ball OD Option K Low Breakaway Torque Option T.010 Oversize OD Option Y PH13-8Mo Ball option (440C no letter) KR 6 - CN G /1 B P W K T Y * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 174 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 175

89 Spherical s KAron Molded Liner Spherical s KR-CW/2 Series / AS81820/2 Wide, Chamfered Outer Race Lined Bore -65º F to +325º F / -54º C to +163º C KR5 to KR16 Qualified to SAE AS81820 with KAron B Liner B D W H Numbers Ball Dia (Ref) Inch mm Inch mm Inch mm Inch mm Inch mm KR3-CW/ KR4-CW/ KR5-CW/ KR6-CW/ KR7-CW/ KR8-CW/ KR9-CW/ KR10-CW/ KR12-CW/ KR14-CW/ KR16-CW/ KR20-CW/ Size Nominal Bore T.010 OD Oversize U.020 OD Oversize Inch mm Inch mm Inch mm Size KR-CW/2 Series / AS81820/2 No-Load Rotational Breakaway Torque Standard ( K ) Type In.-lbs Nm In.-lbs Nm to to to to to to to to 0.23 Size Clearances ( K ) Type Only Radial (max.) Axial (max.) Inch mm Inch mm Numbers F Chamfer x 45º Radial Dynamic Load Rating (See Note 1) Radial Static Limit Load (See Note 1) Axial Static Limit Load (See Note 1) Approx Qº Approx Misalignment Inch mm lbs Kn lbs Kn lbs Kn lbs g KR3-CW/ / / KR4-CW/ / / KR5-CW/ / / KR6-CW/ / / KR7-CW/ / / KR8-CW/ / / KR9-CW/ / / KR10-CW/ / / KR12-CW/ / / KR14-CW/ / / KR16-CW/ / / KR20-CW/ / / Note 1 Load Ratings Shown are with KAron B Liner System KR-CW/2 Series / AS81820/2 AS81820/2 KR Basic KAron Spherical Prefix inch ID (ID in 1/16 inch increments) CW Chamfered Wide Outer Race KR 6 - CW /2 B P W K T Y /2 KAron Lined Bore (ID) B KAron B liner (See Table 2 for liner options) P Cadmium Plated OD per AMS-QQ- P-416 Option E Zinc-Nickel Plated Option OD per AMS2417 W Chrome Plated Ball OD Option K Low Breakaway Torque Option T inch Oversize OD Option Y PH13-8Mo Ball option Liner See Table 2 for liner options Outer Race 17-4PH (AMS5643) H1150 Cond. Ball 440C (AMS5630) HRC 55/62 or PH13-8Mo (AMS5629) H1000 Cond. Passivate PH13-8Mo per AMS 2700, Chrome option per AMS 2460 Class 2 ( thick). * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 176 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 177

90 Spherical s KAron Molded Liner Spherical s KR-CWG/3 Series / AS81820/3 Wide, Grooved Outer Race Lined Bore -65º F to +325º F / -54º C to +163º C KR5 to KR16 Qualified to SAE AS81820 with KAron B Liner KR-CWG/3 Series / AS81820/3 B D W H Numbers Ball Dia (Ref) Inch mm Inch mm Inch mm Inch mm Inch mm KR3-CWG/ KR4-CWG/ KR5-CWG/ KR6-CWG/ KR7-CWG/ KR7A-CWG/ KR8-CWG/ KR9-CWG/ KR10-CWG/ KR12-CWG/ KR14-CWG/ KR16-CWG/ KR20-CWG/ Groove Dia / E Radial Dynamic Load Radial Static Limit Axial Static Approx Qº Numbers Rating (See Note 1) Load (See Note 1) (See Note 1) Approx Misalignment Inch mm lbs Kn lbs Kn lbs Kn lbs g KR3-CWG/ KR4-CWG/ KR5-CWG/ KR6-CWG/ KR7-CWG/ KR7A-CWG/ KR8-CWG/ KR9-CWG/ KR10-CWG/ KR12-CWG/ KR14-CWG/ KR16-CWG/ KR20-CWG/ Materials: Liner See Table 2 for liner options Outer Race 17-4PH (AMS5643) H1150 Cond. Ball 440C (AMS5630) HRC 55/62 or PH13-8Mo (AMS5629) H1000 Cond. Passivate PH13-8Mo per AMS 2700, Chrome option per AMS 2460 Class 2 ( thick). Note 1 Load Ratings Shown are with KAron B Liner System T.010 OD Oversize U.020 OD Oversize Nominal Size Bore Inch mm Inch mm Inch mm A Size Clearances ( K ) Type Only No-Load Rotational Breakaway Torque Radial (max.) Axial (max.) Standard ( K ) Type Inch mm Inch mm In.-lbs Nm In.-lbs Nm to to to to to to to to 0.23 Size P R Y Inch mm Inch mm Inch mm / S Ref KR-CWG/3 Series / AS81820/3 AS81820/3 KR KAron Spherical Prefix ID (ID in 1/16 increments) CW Wide Chamfered Outer Race G Grooved Outer Race /3 KAron Lined Bore (ID) B KAron B liner (See Table 2 for liner options) P Cadmium Plated OD per AMS- QQ-P-416 Option E Zinc-Nickel Plated Option OD per AMS2417 W Chrome Plated Ball OD Option K Low Breakaway Torque Option T.010 Oversize OD Option Y PH13-8Mo Ball option (440C no letter) KR 6 - CW G /3 B P W K T Y * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 178 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 179

91 Spherical s KAron Molded Liner Spherical s KR-CE Series / Extended Inner Race, High Misalignment Extended Inner Race High Misalignment Chamfered Outer Race B D W H O Numbers Shoulder Dia (min.) Inch mm Inch mm Inch mm Inch mm Inch mm KR3-CE KR4-CE KR5-CE KR6-CE KR8-CE KR10-CE KR12-CE KR16-CE Numbers Ball Dia (Ref) F Chamfer x 45º Radial Dynamic Load Rating (See Note 1) Radial Static (See Note 1) Axial Static (See Note 1) Inch mm Inch mm lbs Kn lbs Kn lbs Kn KR3-CE / / KR4-CE / / KR5-CE / / KR6-CE / / KR8-CE / / KR10-CE / / KR12-CE / / KR16-CE / / KR-CE Series KR Basic KAron Spherical Prefix inch ID (ID in 1/16 inch increments) KR 6 - CE B P W CE Extended Inner Race (Ball) Width, Chamfered Outer Race B KAron B liner (See Table 2 for liner options) P Cadmium Plated OD per AMS-QQ-P-416 Option E Zinc-Nickel Plated Option OD per AMS2417 W Chrome Plated Ball OD Option KR-CE Series / Extended Inner Race, High Misalignment Liner See Table 2 for liner options Outer Race 17-4PH (AMS 5643) H1150 Cond. Ball 440C (AMS5630) HRC 55/62 or PH13-8Mo (AMS5629) H1000 Cond. Passivate PH13-8Mo per AMS 2700, Chrome option per AMS 2460 Class 2 ( thick). Note 1 Load Ratings Shown are with KAron B or KAron BX Liner Systems * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. Numbers Approx Qº Approx Misalignment lbs g KR3-CE KR4-CE KR5-CE KR6-CE KR8-CE KR10-CE KR12-CE KR16-CE Size No-Load Rotational Breakaway Torque / Standard In.-lbs Nm 3 & to to to KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 181

92 Spherical s KAron Molded Liner Spherical s KR-CEG Series / Extended Inner Race, High Misalignment with Groove Extended Inner Race High Misalignment Grooved Outer Race B D W H O Numbers Shoulder Dia (min.) Inch mm Inch mm Inch mm Inch mm Inch mm KR3-CEG KR4-CEG KR5-CEG KR6-CEG KR8-CEG KR10-CEG KR12-CEG KR16-CEG Numbers Ball Dia (Ref) Radial Dynamic Load Rating (See Note 1) Radial Static (See Note 1) Axial Static (See Note 1) Approx Qº Approx Misalignment Inch mm lbs Kn lbs Kn lbs Kn lbs g KR3-CE KR4-CE KR5-CE KR6-CE KR8-CE KR10-CE KR12-CE KR16-CE KR-CEG Series KR Basic KAron Spherical Prefix inch ID (ID in 1/16 inch increments) KR 6 - CE G B P W CE Extended Inner Race (Ball) Width, Chamfered Outer Race G Grooved Outer Race B KAron B liner (See Table 2 for liner options) KR-CEG Series / Extended Inner Race, High Misalignment with Groove P Cadmium Plated OD per AMS-QQ-P-416 Option E Zinc-Nickel Plated Option OD per AMS2417 W Chrome Plated Ball OD Option Liner See Table 2 for liner options Outer Race 17-4PH (AMS 5643) H1150 Cond. Ball 440C (AMS 5630) HRC 55/62 or PH13-8Mo (AMS5629) H1000 Cond. Passivate PH13-8Mo per AMS 2700, Chrome option per AMS 2460 Class 2 ( thick). Note 1 Load Ratings Shown are with KAron B Liner System * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. P R S X Size Inch mm Inch mm Inch mm Inch mm 3 & Size No-Load Rotational Breakaway Torque In.-lbs Nm 3 & to to to KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 183

93 Spherical s KAron Molded Liner Spherical s KR-C Series / Spherical Miniature Spherical Miniature KR-C Series / Spherical Miniature B D W H Numbers Inch mm Inch mm Inch mm Inch mm KR088-C KR094-C KR125-C KR156-C Numbers E Chamfer x 45º Suggested Mating Housing Bore Size Ult. Static Load (lbs) See Notes 1 & 2 Inch mm Inch mm lbs kn KR088-C KR094-C KR125-C KR156-C KR-C Series KR Basic KAron Spherical Prefix KR 094 C B ID (Bore Size IN Inch Increments) C Miniature Spherical s Cartridge B KAron B liner (See Table 2 for liner options) QQ-P-416 Option Liner Karon See Table 2 for liner options Outer Race AMS 5643 (17-4PH) Rc 28 MIN Ball AMS 5630 (440C) Rc 55 MIN Notes 1. Load ratings shown are based on KAron B liner system, See Table 2 for liner options 2. Loads shown are based on bearing components only, bolt/pin shear is not considered. 3. No load rotational breakaway torque = 1 inch pound maximum * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 184 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 185

94 Rod Ends Product Overview Rod Ends 186

95 Rod Ends Rod Ends Product Overview Table of Contents Product Page Product Page Rod Ends Ball EN EN FC...M / FCN...M ASNA2579E NSA REP / RAP REP...F Metal to Metal EN EN Fraslip Fabric Liner FMW3E_.4 / NSA FMW3F_.4 / NSA REM REF KAron Molded Liner KR-F / AS81935/ KR-M / AS81935/ KR-FS / Miniature KR-MS / Miniature

96 Rod Ends Ball s Rod Ends EN4035 Male Thread Double Row Self-Aligning CRES / Titanium d D B C I G (min.) 4h 6h mm Inch mm Inch mm Inch mm Inch mm Inch mm MJ8 x MJ10 x MJ12 x MJ14 x 1.50 EN4035 L d 1 F P W ±0.500 ± (min.) (min.) ±0.200 ± ±0.100 ± mm Inch mm Inch mm Inch mm Inch mm Inch Z Starting Torque Sealed Shielded Static Radial Static Axial mm Inch Nmm Ozf-in Nmm Ozf-in kn lbs kn lbs g lbs EN4035 L Thread L: Left Hand R: Right Hand 06 EN4035 L 06 P K A T E Protection E:Sealed P:Shielded K Longitudinal Groove N: Without Groove M: See K: See A Grease Type A: NATO G 354 / MIL-PRF B: NATO G 395 / MIL-PRF T Surface Treatment No : None T: Inner + Outer Ring Passivated Rod End EN3353 / / Ti6Al4V Rings + Balls EN2030 / / AISI 440C Technical Specification per EN2067 (mm) Axial Play (mm) 0.08 max. 190 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 191

97 Rod Ends Ball s Rod Ends EN4036 Male Thread Double Row Self-Aligning CRES d D B C I G (min.) 4h 6h mm Inch mm Inch mm Inch mm Inch mm Inch mm MJ8 x MJ10 x MJ12 x MJ14 x 1.50 L d 1 F P W ±0.500 ± (min.) (min.) ±0.200 ± mm Inch mm Inch mm Inch mm Inch mm Inch Z Starting Torque Sealed Shielded Static Radial Static Axial mm Inch Nmm Ozf-in Nmm Ozf-in kn lbs kn lbs g lbs EN4036 R Thread R: Right Hand L: Left Hand 06 P Protection E:Sealed P:Shielded EN4036 R 06 E K A T K Longitudinal Groove N: Without Groove M: See K: See A Grease Type A: NATO G 354 / MIL-PRF B: NATO G 395 / MIL-PRF T Surface Treatment No : Rod End Passivated T: + Rod End Passivated Rod End EN2136 / / AISI 431 / BS S80 Rings + Balls EN2030 / / / AISI 440C Technical Specification EN2067 (mm) Axial Play (mm) 0.08 max. EN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 193

98 Rod Ends Ball s Rod Ends FC...M / FCN...M Male Thread Double Row Self-Aligning Dimensions According to EN2492 FC...M / FCN...M Type d D B C I G h 6h mm Inch mm Inch mm Inch mm Inch mm Inch FC5M M8 x 1.00 FC5MJ MJ8 x 1.00 FCN6M M10 x 1.00 FCN6MJ MJ10 x 1.25 FCN8M M12 x 1.00 FCN8/15M M12 x 1.50 FCN8MJ MJ12 x 1.25 FCN10M M14 x 1.50 FCN10/10M M14 x 1.00 FCN10MJ MJ14 x 1.50 Type L d F P W 1 ±0.500 ± (min.) mm Inch mm Inch mm Inch mm Inch mm Inch FC5M FC5MJ FCN6M FCN6MJ FCN8M FCN8/15M FCN8MJ FCN10M FCN10/10M FCN10MJ FCN M Number of Series 10 J and Thread J: MJ Thread No : M thread E Protection E: Sealed No : Shielded G Thread G: Left Hand No : Right Hand K Longitudinal Groove K: With Groove No : Without Groove A Grease Type A: NATO G 354 / MIL-PRF B: NATO G 395 / MIL-PRF T Surface Treatment No : Rod End Passivated T: Inner Ring + Rod End Passivated Rod End EN2099 / / BS S157 Rings + Balls EN2031 / / AISI E Technical Specification EN2067 (mm) 0.02 max. Axial Play (mm) 0.08 max. Type Z Starting Torque Sealed Shielded Static Radial mm Inch Nmm Ozf-in Nmm Ozf-in kn lbs g lbs FC5M FC5MJ FCN6M FCN6MJ FCN8M FCN8/15M FCN8MJ FCN10M FCN10/10M FCN10MJ FCN 10 M J E G K A T 194 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 195

99 Rod Ends Ball s Rod Ends ASNA2579E Male Thread Double Row Self-Aligning CRES ASNA2579E d D B C L Groove G I ±0.254 ± ±0.127 ± ±0.250 ± Location UNF-3A ±0.500 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch d 1 W Z Starting Torque Axial Play (max.) Static Radial mm Inch mm Inch mm Inch Nm In-lbs mm Inch kn lbs g lbs ASNA2579 E Protection E: Sealed 41 G Thread G: Left Hand D: Right Hand Rod End EN2136 / / AISI 431 / BS S80; Cadmium Plated Rings + Balls EN2030 / / AISI 440C ASNA2579 E 41 G 196 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 197

100 Rod Ends Ball s Rod Ends Right Hand Thread Left Hand Thread Groove Location G I P T UNF-3A ±0.500 ± d 1 NSA8159 NSA8159 Male Thread Double Row Self-Aligning mm Inch mm Inch mm Inch mm Inch Right Hand Thread Left Hand Thread d D B b L ±0.250 ± ±0.120 ± ±0.250 ± mm Inch mm Inch mm Inch mm Inch mm Inch Right Hand Thread Left Hand Thread M N Axial Play (max.) Static Radial mm Inch mm Inch mm Inch kn lbs g lbs NSA8159 NSA E A 014 and Thread E Protection E: Sealed P: Shielded A Material Ring + Balls A: EN2031 / / AISI E No : EN2030 / / AISI 440C Grease Type: NATO G 354 / MIL-PRF Rod End EN2099 / / BS S157; Cadmium Plated Technical Specification MIL-B KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 199

101 Rod Ends Ball s Rod Ends REP / RAP Male Thread Double Row Self-Aligning Dimensions According to AS21151 Type d D B C L ±0.254 ± ±0.254 ± ±0.254 ± mm Inch mm Inch mm Inch mm Inch mm Inch g lbs REP 3M REP 3M REP 3M 6-2N RAP 3M REP 3M 6A REP 4M REP 5M REP 5M REP 5M RAP 10M Type I d W Z r 1 Static Radial G ±0.762 ± (min.) UNJF-3A mm Inch mm Inch mm Inch mm Inch mm Inch kn lbs REP 3M REP 3M REP 3M 6-2N RAP 3M REP 3M 6A REP 4M REP 5M REP 5M REP 5M RAP 10M REP3M 6 Number L Thread No : Right Hand L: Left Hand REP3M L S 6 K G S..K Longitudinal Groove No : Without Groove S..K: With Groove G Grease Type G: NATO G 354 / MIL-PRF No : NATO G 395 / MIL-PRF REP / RAP Rod End EN2099 / / BS S157; Cadmium Plated Inner Ring EN2031 / / AISI E52100 Cadmium Plated Except Bore Sealed Type Seals (PTFE); Seal Retainers (CRES) (mm) 0.01 max. Axial Play (mm) max. 200 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 201

102 Rod Ends Ball s Rod Ends REP...F Female Thread Double Row Self-Aligning Dimensions According to AS21153 REP...F Type d D B C L G ±0.254 ± ±0.254 ± ±0.250 ± UNJF-3B mm Inch mm Inch mm Inch mm Inch mm Inch REPB 3 N RH 2 REPB 3 N RH 1 REP 3 F RH 2 REP 3 FL LH 2 REP 3 FL LH 2 REP 4 F RH 1 REP 4 F L LH 1 REP F RH - REP 4 F L LH - REP 5 F RH - REP 5 F L LH - Type Type r (max.) Axial Play (max.) Radial Static Radial Static Ultimate Load mm Inch mm Inch mm Inch kn lbs kn lbs g lbs REPB 3 N REPB 3 N REP 3 F REP 3 FL REP 3 FL REP 4 F REP 4 F L REP F REP 4 F L REP 5 F REP 5 F L Type R I d U N S 1 ±0.788 ± (min) ±0.254 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch REPB 3 N REPB 3 N REP 3 F REP 3 FL REP 3 FL REP 4 F REP 4 F L REP F REP 4 F L REP 5 F REP 5 F L REP 4F5 Number REP 4F5 K G K Keyslot No : Without Keyslot K: With Keyslot G Grease Type G: NATO G 354 / MIL-PRF No : NATO G 395 / MIL-PRF Rod End EN2099 / / BS S157; Cadmium Plated Inner Ring EN2031 / / AISI E52100 Cadmium Plated Except Bore Sealed Type Seals (PTFE); Seal Retainers (CRES) 202 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 203

103 Rod Ends Metal to Metal Rod Ends EN6055 Male Thread Metal to Metal CRES EN6055 d D B C ±0.254 ± ±0.127 ± (min.) ±0.254 ± d 1 H Normal / N Reduced / P Axial Play Normal / N Axial Play Reduced / P mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch to to to to max max max max to to to to max max max max to to to to max max max max to to to to max max max max to to to to max max max max to to to to max max max max to to to to max max max max to to to to max max max max to to to to max max max max to to to to max max max max to to to to max max max max to to to to max max max max. Z W R I G UNJF-3A mm Inch mm Inch mm Inch mm Inch ß (min.) Radial Static Axial Static Radial Static Ultimate Load kn lbs kn lbs kn lbs kn lbs g lbs Fatigue Load EN6055 continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 205

104 Rod Ends Metal to Metal EN6055 EN6055 R Thread R: Right Hand L: Left Hand 04 N N: Normal R: Reduced T Surface Treatment T: Passivated P: Cadmium Plated A Grease Type A: NATO G 354 / MIL-PRF B: NATO G 395 / MIL-PRF K Longitudinal Groove F: Without Groove K: With Groove Rod End EN2539 / 17-4PH H1025 / Outer Ring EN2539 / 17-4PH H1150 / Inner Ring EN2030 / AISI 440C / Technical Specification EN6099 EN6055 R 04 N T A K 206 KAMAN Specialty s and Engineered Products 207

105 Rod Ends Metal to Metal Rod Ends EN6056 Male Thread Self-Lubricating CRES d C D B ±0.254 ± (min.) ±0.254 ± UNJF-3A mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Z W I R d 1 Starting Torque Normal / N H G Starting Torque Reduced / R mm Inch mm Inch mm Inch mm Inch Nm In.-lbs Nm In.-lbs to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to ß (min.) Radial Static Axial Static Radial Static Ultimate Load Radial Dynamic kn lbs kn lbs kn lbs kn lbs kn lbs g lbs EN6056 Number of Standard / Number R Thread R: Right Hand L: Left Hand EN6056 R 04 N T K 04 N Starting Torque N: Normal R: Reduced T Surface Treatment T: Passivated P: Cadmium Plated K Longitudinal Groove F: Without Groove K: With Groove Fatigue Load EN6056 Rod End EN2539 / 17-4PH H1025 / Outer Ring EN2539 / 17-4PH H1150 / Inner Ring EN2030 / AISI 440C / Liner per EN2755 / SAE AS81820 Technical Specification EN KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 209

106 Rod Ends Fraslip Fabric Liner Rod Ends FMW3E_.4 / NSA8143 Male Thread Self-Lubricating CRES FMW3E_.4 / NSA8143 d D B C ±0.254 ± ±0.127 ± (min.) UNJF-3A mm Inch mm Inch mm Inch mm Inch mm Inch d 1 G L I W Z I α ±0.254 ± mm Inch mm Inch mm Inch mm Inch mm Inch No Starting Torque X Static NSA8143 Number of Series 04 X Starting Torque X: Reduced None: Normal R Thread R: Right Hand L: Left Hand F Longitudinal Groove F: Without Groove K: With Groove P Surface Treatment No : None P: Rod End Cadmium Plated FMW3E Number of Series 4.4 X Starting Torque X: Reduced None: Normal R Thread R: Right Hand L: Left Hand K Longitudinal Groove F: Without Groove K: With Groove Rod End EN2539 / 17-4PH H1025 / Outer Ring EN2539 / 17-4PH H1150 / Inner Ring EN2030 / AISI 440C / Liner per SAE AS81820 / EN2755 Technical Specification SAE AS81935 Nm In.-lbs Nm In.-lbs kn lbs g lbs to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to NSA X R F P FMW3E 4.4 X R K 210 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 211

107 Rod Ends Fraslip Fabric Liner Rod Ends FMW3F_.4 / NSA8149 Female Thread Self-Lubricating CRES d D B C d 1 L ±0.127 ± (min.) ±0.254 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch I n S P T ±0.254 ± ±0.254 ± ±0.381 ± ±0.381 ± mm Inch mm Inch mm Inch mm Inch mm Inch FMW3F_.4 / NSA8149 NSA8143 Number of Series 04 L Thread R: Right Hand L: Left Hand NSA L FMW3F Number of Series 5.4 L Thread R: Right Hand L: Left Hand FMW3F 5.4 L Rod End EN2539 / 17-4PH H1025 / ; Cadmium Plated Outer Ring EN2539 / 17-4PH H1150 / Inner Ring EN2030 / AISI 440C / Liner EN2030 / AISI 440C / Technical Specification per SAE AS81820 / EN2755 e Z G ±0.100 ± ±0.254 ± UNF-3B mm Inch mm Inch g lbs α 212 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 213

108 Rod Ends Fraslip Fabric Liner Rod Ends REM Male Thread Self-Lubricating Dimensions According to SAE AS81935 / 1 REM Type d D B C d G ±0.254 ± ±0.127 ± (min.) UNJF-3A mm Inch mm Inch mm Inch mm Inch mm Inch REM6W10M REM8W10M REM10W10M REM12W10M REM14W10M REM16W10M REM20W10M REM24W10M REM28W10M REM32W10M Type L I I 1 W Z α ±0.254 ± ±0.787 ± mm Inch mm Inch mm Inch mm Inch mm Inch REM6W10M REM8W10M REM10W10M REM12W10M REM14W10M REM16W10M REM20W10M REM24W10M REM28W10M REM32W10M (min.) REM Number of Series S Longitudinal Groove No : Without Groove S: With Groove REM S L 8W10M X L Thread No : Right Hand L: Left Hand 8 W 10 M X Starting Torque No : Normal X: Reduced Rod End MIL-S-5000; Cadmium Plated Outer Ring EN2539 / / 17-4 PH H1150 Inner Ring EN2030 / / AISI 440C Liner per SAE AS81820 / EN2755 Technical Specification SAE AS81935 Type Normal Starting Torque X Radial Static Ultimate Load Nm In.-lbs Nm In.-lbs kn lbs kn lbs g lbs REM6W10M to to to to REM8W10M to to to to REM10W10M to to to to REM12W10M to to to to REM14W10M to to to to REM16W10M to to to to REM20W10M to to to to REM24W10M to to to to REM28W10M to to to to REM32W10M to to to to Fatigue Load 214 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 215

109 Rod Ends Fraslip Fabric Liner Rod Ends REF Type Female Thread Self-Lubricating Dimensions According to SAE AS81935 / 2 d D B C ±0.254 ± ±0.127 ± mm Inch mm Inch mm Inch mm Inch mm Inch REF 6W10M REF 8W10M REF 10W12M REF 12W12M REF 14W14M REF 16W16M REF 20W20M REF 24W24M REF 28W28M REF 32W40M Type L T I ±0.254 ± ±0.254 ± S (measured across corners or diameter) mm Inch mm Inch mm Inch mm Inch mm Inch REF 6W10M REF 8W10M REF 10W12M REF 12W12M REF 14W14M REF 16W16M REF 20W20M REF 24W24M REF 28W28M REF 32W40M d 1 (min.) Z Type Type n P M N G ±0.254 ± ±0.508 ± UNJF-3B mm Inch mm Inch mm Inch mm Inch REF 6W10M REF 8W10M REF 10W12M REF 12W12M REF 14W14M REF 16W16M REF 20W20M REF 24W24M REF 28W28M REF 32W40M Normal Starting Torque X Radial Static Ultimate Load Nm In.-lbs Nm In.-lbs kn lbs kn lbs g lbs REF 6W10M to to to to REF 8W10M to to to to REF 10W12M to to to to REF 12W12M to to to to REF 14W14M to to to to REF 16W16M to to to to REF 20W20M to to to to REF 24W24M to to to to REF 28W28M to to to to REF 32W40M to to to to Fatigue Load (Ref.) α (min.) REF REF Number of Series REF L 8W10 2 M X L Thread No : Right Hand L: Left Hand 8 W 10 M 2 Keyslot No : Without Keyslot 2: With Keyslot X Starting Torque No : Normal X: Reduced Materials: Rod End MIL-S-5000; Cadmium Plated Outer Ring EN2539 / / 17-4 PH H1150 Inner Ring EN2030 / / AISI 440C Liner per SAE AS81820 / EN2755 Technical Specification SAE AS KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 217

110 Rod Ends KAron Molded Liner Rod Ends KR-F Series / AS81935/2 Rod End Female Dimensionally Equivalent to AS81935/2 KR-F Series / AS81935/2 Numbers B D / Rod End Dia. L F N / Shank Dia. E ± ±0.254 Thread Length Min. ± ±0.254 ± ±0.254 UNJF-3B Inch mm Inch mm Inch mm Inch mm Inch mm KR3-F KR4-F KR5-F KR6-F KR7-F KR8-F KR10-F KR12-F KR14-F KR16-F Numbers No Load Rotational Breakaway Torque In-lbs Nm 3 & to to to 12 1 to to to 16 1 to to 2.71 KR-F Series Number of Standard KR Basic Rod End Part Number Prefix ID (ID in 1/16 increments) F Female Rod End Body KR 6 - F S B L K S Rod End Body Material, S or A B KAron B liner (See Table 2 for liner options) L L for Left Hand Thread K K for Keyway S Add Suffix S To P/N For 17-4PH Body AMS 5643 (17-4PH) Rc 39 MIN Passivated Liner KAron Race AMS 5643 (17-4PH) Rc 28 MIN Ball AMS 5630 (440C) Rc 55 MIN Q (min.) A Add Suffix A To P/N For Alloy Steel Body 4340 OR 4230 Alloy Steel Rc 39 MIN CAD. Plated Liner KAron Race AMS 5643 (17-4PH) Rc 28 MIN Ball AMS 5630 (440C) Rc 55 MIN * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. W H O G C R Numbers (min.) ± ±0.127 ± ± ± ±0.254 Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm KR3-F KR4-F KR5-F KR6-F KR7-F KR8-F KR10-F KR12-F KR14-F KR16-F Numbers S J Load Ratings See Note 1 Max. (Lbs) Ref Dia or Distance Across Corners Max. Housing ID Ultimate Static Fatigue Axial Proof Inch mm Inch mm lbs kn lbs kn lbs kn lbs. g KR3-F KR4-F KR5-F KR6-F KR7-F KR8-F KR10-F KR12-F KR14-F KR16-F Note 1 Load ratings are based on KAron B liner system. 218 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 219

111 Rod Ends KAron Molded Liner Rod Ends KR-M Series / AS81935/1 Rod End Male Dimensionally Equivalent to AS81935/1 KR-M Series / AS81935/1 B D L F W Numbers ± ±0.254 ± ±0.787 ± ± Inch mm Inch mm Inch mm Inch mm Inch mm KR3-M KR4-M KR5-M KR6-M KR7-M KR8-M KR10-M KR12-M KR14-M KR16-M Numbers No Load Rotational Breakaway Torque lbs Nm 3 & to to to 12 1 to to to 16 1 to to 2.71 KR-M Series KR Basic Rod End Part Number Prefix ID (ID in 1/16 increments) M Male Rod End Body KR 6 - M S B L K S Rod End Body Material, S or A B KAron B liner L L for Left Hand Thread K K for Keyway S Add Suffix S To P/N For 17-4PH Body AMS 5643 (17-4PH) Rc 39 MIN Passivated Liner KAron Race AMS 5643 (17-4PH) Rc 28 MIN Ball AMS 5630 (440C) Rc 55 MIN A Add Suffix A To P/N For Alloy Steel Body 4340 OR 4230 Alloy Steel Rc 39 MIN CAD. Plated Liner KAron Race AMS 5643 (17-4PH) Rc 28 MIN Ball AMS 5630 (440C) Rc 55 MIN * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. H O G J E Numbers ± ±0.127 (min.) Max. Housing ID UNJF-3A Inch mm Inch mm Inch mm Inch mm KR3-M KR4-M KR5-M KR6-M KR7-M KR8-M KR10-M KR12-M KR14-M KR16-M Numbers Load Ratings See Notes 1 & 2 Ultimate Static Fatigue Axial Proof lbs kn lbs kn lbs kn lbs. g KR3-M KR4-M KR5-M * 12.3* KR6-M KR7-M KR8-M * 34.2* KR10-M KR12-M KR14-M KR16-M Note 1 1. Load ratings are based on KAron B liner system. 2. *Load rating based on shank limitation. Q (min.) 220 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 221

112 Rod Ends KAron Molded Liner Rod Ends KR-FS Series / Female Miniature Rod End Female Miniature B D L F N Numbers ± ±0.254 ± ±0.787 ± ±0.254 ± ±0.254 Inch mm Inch mm Inch mm Inch mm Inch mm KR047-FS KR094-FS KR125-FS KR156-FS KR-FS Series / Female Miniature W H S Ultimate Static Load E Numbers Ref Dia or Distance ± ± Across Corners See Notes 1 & 2 UNF-3B Inch mm Inch mm Inch mm lbs. kn KR047-FS KR094-FS KR125-FS KR156-FS KR-M Series KR Basic Rod End Part Number Prefix ID, Bore Size In Inch Increments FS Miniature Female Rod End Body B KAron B liner L L for Left Hand Thread K K for Keyway Liner KAron Rod End Body AMS 5643 (17-4PH) Rc 28 MIN Ball AMS 5630 (440C) Rc 55 MIN Notes 1. Load ratings shown are based on KAron B liner system only. 2. No load rotational breakaway torque = 1 inch pound maximum. KR 094 FS B L K * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 222 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 223

113 Rod Ends KAron Molded Liner Rod Ends KR-MS Series / Male Miniature Rod End Male Miniature B D G E Numbers ± ±0.254 ± ±0.787 UNF-3A Inch mm Inch mm Inch mm KR047-MS KR094-MS KR125-MS KR156-MS KR-MS Series / Male Miniature F W H Ultimate Static Load Numbers ± ± ± ±0.127 See Notes 1 & 2 Inch mm Inch mm Inch mm lbs. kn KR047-MS KR094-MS KR125-MS KR156-MS KR-M Series KR Basic Rod End Part Number Prefix ID, Bore Size In Inch Increments MS Miniature Male Rod End Body B KAron B liner L L for Left Hand Thread K K for Keyway Liner KAron Rod End Body AMS 5643 (17-4PH) Rc 28 MIN Ball AMS 5630 (440C) Rc 55 MIN Notes 1. Load ratings shown are based on KAron B liner system only. 2. No load rotational breakaway torque = 1 inch pound maximum. KR 094 MS B L K * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 224 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 225

114 Track Rollers / Cam Followers Product Overview Track Rollers / Cam Followers 226

115 Track Rollers / Cam Followers Track Rollers / Cam Followers Product Overview Table of Contents Product Page Product Page Track Rollers / Cam Followers KAron Molded Liner KRP562 / NAS KRP567 / KRP with Crowned Outer Race KRP502 / AS KRP503 / AS KRP522 / KRP with Crowned Outer Race KRP523 / Heavy Duty Track Rollers KRP527 / Self-Aligning Track Rollers KRP505 / AS KRP506 / AS KAron Molded Liner Airframe Pivot KRP( ) Series / AS KRP( ) A Series / AS KRP( ) B Series / AS KRP( ) BS Series / AS KRP( ) P Series / AS KRPB500 / AS

116 Track Rollers / Cam Followers KAron Molded Liner Track Rollers/ Cam Followers KRP562 / NAS 562 SERIES Studded Self-Lubricating Track Roller Cam Follower s Dimensionally Equivalent to NAS 562 Series B D H F S Thread Size UNJF-3A per Numbers Dist to Cotter Pin Hole Thread Length (Ref) (min.) AS8879 Inch mm Inch mm Inch mm Inch mm Inch mm KRP KRP KRP KRP KRP KRP L (Keyway Length) M N (Key Width) G (Slot Depth) P (Hole Dia) T Numbers Track Keyway Runout (Ref) Width (min.) Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm KRP KRP KRP KRP KRP KRP Numbers A Ring Dia (min.) Radial Static (See Notes 2 & 3) Inch mm lbs kn KRP KRP KRP KRP KRP KRP NOTES 1. Stud Length = Nominal Grip Length + S Thread Length, +.031, Load ratings shown are based on KAron V liner system. 3. Loads shown are based on liner capacity only. KRP562 KRP KAron Track Roller Prefix 562 Studded Roller Series, Crowned Outer Race Stud ( in 1/16 increments) V KAron V Liner T Track Roller (not optional in p/n) KRP V T Z A K -16 S D Z Add Z for Seal Option A Add A for NO Cotter Pin Hole K Add K for Keyway Option Stud Grip Length (Length in 1/16 Increments) S Add S for PH13-8MO CRES Stud Option. D Add D for 440C Outer Race Option Z Add Suffix Z To P/N for Seal Option (Acetal Resin or Nylon) D Add Suffix D To P/N for AMS 5630 (440C) Rc Outer Race S Add Suffix S To P/N for AMS 5629 (PH13-8MO) Rc 43 MIN (COND H1000 REF) Stud & Thrust Ring Liner KAron Standard Stud & Thrust Ring AMS 5643 (17-4PH) Rc 40 MIN (COND H900 Reference) Standard Outer Race AMS 5617 Custom 455 Rc 47 MIN KRP562 Series / NAS 562 (Ref) For all Sizes: to inches to mm Axial Play to inches to mm * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 230 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 231

117 Track Rollers / Cam Followers KAron Molded Liner Track Rollers/ Cam Followers KRP567 / NAS 562 Series with Crowned Outer Race Studded Self-Lubricating Crowned Outer Race Track Roller Cam Follower s Otherwise Dimensionally Equivalent to KRP 562 Series B D H F S Thread Size UNJF-3A per Numbers Dist to Cotter Pin Hole Thread Length (Ref) (min.) MIL-S-8879 Inch mm Inch mm Inch mm Inch mm Inch mm KRP KRP KRP KRP KRP KRP L (Keyway Length) M N (Key Width) G (Slot Depth) P (Hole Dia) C Numbers Crown Radius Keyway Runout (Ref) Ref Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm KRP KRP KRP KRP KRP KRP Numbers A Ring Dia (min.) Radial Static (See Notes 2 & 3) Inch mm lbs kn KRP KRP KRP KRP KRP KRP NOTES 1. Stud Length = Nominal Grip Length + S Thread Length, +.031, Load ratings shown are based on KAron V liner system. 3. Loads shown are based on liner capacity only. KRP567 KRP KAron Track Roller Prefix 567 Studded Roller Series, Crowned Outer Race Stud ( in 1/16 increments) V KAron V Liner T Track Roller (not optional in p/n) KRP V T Z A K 16 S D Z Add Z for Seal Option A Add A for NO Cotter Pin Hole Option K Add K for Keyway Option Stud Grip Length (Length in 1/16 Increments) S Add S for PH13-8MO CRES Stud Option D Add D for 440C CRES Outer Race Option Z Add Suffix Z To P/N for Seal Option (Acetal Resin or Nylon) KRP567 / NAS 562 Series with Crowned Outer Race D Add Suffix D To P/N for AMS 5630 (440C) Rc 55 Min Outer Race S Add Suffix S To P/N for AMS 5629 (PH13-8MO) COND H1000 Rc 43 MIN Stud & Thrust Ring Liner Karon V Standard Stud & Thrust Ring AMS 5643 (17-4PH) Rc 40 MIN (COND H900 Reference) Standard Outer Race AMS 5617 Custom 455 Rc 47 MIN For all Sizes: to inches to mm Axial Play to inches to mm * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 232 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 233

118 Track Rollers / Cam Followers KAron Molded Liner Track Rollers/ Cam Followers KRP502 / AS24465 KAron Lined Self-Lubricating Track Roller Cam Follower Dimensionally Equivalent to AS24465 Series B D W H E Numbers Radius or 45 Deg Chamfer to Clear Fillet Rad Inch mm Inch mm Inch mm Inch mm Inch mm KRP KRP KRP KRP KRP / / KRP / / KRP / / Numbers A T Radial Static Track Thrust Ring Dia (Ref) Width Min (See Notes 1 & 2) Axial Static Inch mm Inch mm lbs kn lbs kn lbs g KRP KRP KRP KRP KRP KRP KRP NOTES 1. Load ratings shown are based on KAron V liner system. 2. Loads shown are based on liner capacity only. KRP502 Series KRP KAron Track Roller Prefix 502 Non-Studded Roller Series Stud ( in 1/16 increments) V KAron V Liner KRP V T Z D T Track Roller (not optional in p/n) Z Add Z for Seal Option D Add D for 440C Outer Race Option D Add Suffix D To Part Number for 440C Outer Race AMS 5630 Rc Z Add Suffix Z To P/N for Seal Option (Acetal Resin or Nylon) Liner KAron V Thrust Ring AMS 5643 (17-4PH) Rc 28 MIN (COND H1150 Reference) Inner Race AMS 5643 (17-4PH) Rc 28 MIN (COND H1150 Reference) Outer Race AMS 5617 Custom 455 Rc 47 Min KRP502 / AS24465 For all Sizes: to inches to mm Axial Play to inches to mm * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 234 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 235

119 Track Rollers / Cam Followers KAron Molded Liner Track Rollers/ Cam Followers KRP503/ AS24466 Self-Lubricating Airframe Pivot & Track Roller s Dimensionally Equivalent to AS24466 Series B / Stud Dia D / Roller Outer Dia W / Inner Race Width H / Outer Race Width E Numbers Radius or 45 Deg Chamfer to Clear Fillet Rad Inch mm Inch mm Inch mm Inch mm Inch mm KRP KRP KRP / / KRP / / KRP / / Numbers A T Radial Static Track Thrust Ring Dia (Ref) Width Min (See Notes 1 & 2) Axial Static Inch mm Inch mm lbs kn lbs kn lbs g KRP KRP KRP KRP KRP NOTES 1. Load ratings shown are based on KAron V liner system. 2. Loads shown are based on liner capacity only. KRP503 Series KRP KAron Track Roller Prefix 503 Non-Studded Roller Series Stud ( in 1/16 increments) V KAron V Liner KRP V T Z D T Track Roller (not optional in p/n) Z Add Z for Seal Option D Add D for 440C Outer Race Option D Add Suffix D To Part Number for 440C Outer Race AMS 5630 Rc Z Add Suffix Z To P/N for Seal Option (Acetal Resin or Nylon) Liner KAron V Thrust Ring AMS 5643 (17-4PH) Rc 28 MIN (COND H1150 Reference) Inner Race AMS 5643 (17-4PH) Rc 28 MIN (COND H1150 Reference) Outer Race AMS 5617 Custom 455 Rc 47 Min KRP503/ AS24466 For all Sizes: to inches to mm Axial Play to inches to mm * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 236 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 237

120 Track Rollers / Cam Followers KAron Molded Liner Track Rollers/ Cam Followers KRP522 / KRP 502 with Crowned Outer Race Self-Lubricating Airframe Crowned Outer Race Similar to KRP 502 Series with Crowned Outer Race B / Bore Dia. D / Roller Outer Dia. W / Inner Race Width H / Outer Race Width E / Radius or 45 Deg Chamfer Numbers Inch mm Inch mm Inch mm Inch mm Inch mm KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP / / KRP / / KRP / / KRP / / KRP / / KRP / / A R Cr Radial Static Numbers Thrust Ring Dia (Ref) Crown Radius Ref (See Notes 1 & 2) Inch mm Inch mm Inch mm lbs kn lbs g KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP522 Series KRP KAron Prefix 522 Crowned Track Roller Series Stud ( in 1/16 increments) V KAron V Liner KRP V T Z D NOTES T Add T for Track Roller (not optional in p/n) Z Add Z for Seal Option D Add D for 440C Outer Race Option 1. Load ratings shown are based on KAron V liner system. 2. Loads shown are based on liner capacity only. D Add Suffix D To Part Number for 440C Outer Race AMS 5630 Rc Z Add Suffix Z To P/N for Seal Option (Acetal Resin or Nylon) Liner KAron V Thrust Ring AMS 5643 (17-4PH) Rc 28 MIN (COND H1150 Reference) Inner Race AMS 5643 (17-4PH) Rc 28 MIN (COND H1150 Reference) Outer Race AMS 5617 Custom 455 Rc 47 Min KRP522 / KRP 502 with Crowned Outer Race For all Sizes: to inches to mm Axial Play to inches to mm * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 238 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 239

121 Track Rollers / Cam Followers KAron Molded Liner Track Rollers/ Cam Followers KRP523 / KRP 503 Series Heavy Duty Track Rollers Self-Lubricating Pivot & Track Roller s Typical Aircraft High Load Flap Track Roller Series B / Bore Dia. D / Roller Outer Dia. W / Inner Race Width H / Outer Race Width Numbers Inch mm Inch mm Inch mm Inch mm KRP KRP KRP KRP KRP KRP KRP KRP KRP / / KRP / / KRP / / E / Radius or 45 Deg Chamfer A T Radial Static Numbers Tract Contract Thrust Ring Dia (Ref) Width Min (See Notes 1 & 2) Inch mm Inch mm Inch mm lbs kn lbs g KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP NOTES 1. Load ratings shown are based on KAron V liner system. 2. Loads shown are based on liner capacity only. KRP523 Series KRP KAron Track Roller Prefix 523 Non-Studded Roller Series Stud ( in 1/16 increments) V KAron V Liner KRP V T Z D T Track Roller (not optional in p/n) Z Add Z for Seal Option D Add D for 440C Outer Race Option D Add Suffix D To Part Number for 440C Outer Race AMS 5630 Rc Z Add Suffix Z To P/N for Seal Option (Acetal Resin or Nylon) Liner KAron V Thrust Ring AMS 5643 (17-4PH) Rc 28 MIN (COND H1150 Reference) Inner Race AMS 5643 (17-4PH) Rc 28 MIN (COND H1150 Reference) Outer Race AMS 5617 Custom 455 Rc 47 Min KRP523 / KRP 503 Series Heavy Duty Track Rollers For all Sizes: to inches to mm Axial Play to inches to mm * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 240 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 241

122 Track Rollers / Cam Followers KAron Molded Liner Track Rollers/ Cam Followers KRP527 / Self-Aligning Track Rollers KAron Lined Self-Aligning Self-Lubricating Track Roller Cam Follower Series B / Bore Dia. D / Roller Outer Dia. W / Inner Race Width H / Outer Race Width E / Radius or 45 Deg Chamfer Numbers Inch mm Inch mm Inch mm Inch mm Inch mm KRP KRP KRP KRP KRP KRP A C S Radial Static Numbers Corner Radius Clamp-Up Thrust Ring Dia (Ref) (Ref) Minimum (Ref) (See Notes 1 & 2) Inch mm Inch mm Inch mm lbs kn lbs g KRP KRP KRP KRP KRP KRP NOTES 1. Load ratings shown are based on KAron V liner system. 2. Loads shown are based on liner capacity only. KRP527 Series KRP KAron Prefix 527 Self-Aligning Roller Series Bore ( in 1/16 increments) KRP V T V KAron V Liner (See Table 1 for liner Options) T Track Roller Application Liner KAron Seal / Snubber PTFE / ELASTOMER Inner Race AMS 5643 (17-4PH) Rc 28 MIN (COND H1150 Reference) Outer Race & Insert AMS 5617 Custom 455 Rc 47 Min KRP527 / Self-Aligning Track Rollers inches maximum mm maximum Rotational Torque (no-load) 2 inch-pounds maximum 0.23 N-m maximum * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 242 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 243

123 Track Rollers / Cam Followers KAron Molded Liner Track Rollers/ Cam Followers KRP505 / AS24461 Self-Lubricating Airframe Pivot & Track Roller s Dimensionally Equivalent to AS24461 Series B / Bore Dia. D / Roller Outer Dia. W / Inner Race Width H / Outer Race Width Numbers Inch mm Inch mm Inch mm Inch mm KRP KRP KRP KRP KRP KRP KRP / / KRP / / KRP / / KRP / / KRP / / KRP / / / / KRP / / / / KRP / / / / KRP / / / / KRP / / / / KRP / / / / KRP / / / / KRP / / / / KRP / / / / KRP505 / AS24461 E A R Radial Static Axial Static Numbers Radius or 45 Deg Chamfer Thrust Ring (Ref) to Clear Fillet Rad Dia (Ref) (See Notes 1 & 2) Inch mm Inch mm Inch mm lbs kn lbs kn lbs g KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP505 Number of Standard KRP KAron Prefix 505 Airframe / Pivot / Roller Series KRP V T Z D P Stud ( in 1/16 increments) V KAron V Liner T Add T for Track Roller (Custom 455 Outer Race) Option Z Add Z for Seal Option D Add D for 440C Outer Race Option P Add P for OD Cadmium Plate Option (per QQ-P- 416 Type II, Class 2) D Add Suffix D To Part Number for 440C Outer Race AMS 5630 Rc T Add Suffix T for Track Roller Option AMS 5617 Outer Race Custom 455 Rc 47 MIN Z Add Suffix Z To P/N for Seal Option (Acetal Resin or Nylon) Liner KAron V Thrust Ring AMS 5643 (17-4PH) Rc 40 MIN (COND H900 Reference) Inner Race AMS 5643 (17-4PH) Rc 40 MIN (COND H900 Reference) Outer Race AMS 5643 (17-4PH) Rc 28 Min (COND H1150 Reference) For all Sizes: to inches to mm Axial Play to inches to mm NOTES 1. Load ratings shown are based on KAron V liner system. 2. Loads shown are based on liner capacity only. * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 244 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 245

124 Track Rollers / Cam Followers KAron Molded Liner Track Rollers/ Cam Followers KRP506 / AS24462 Self-Lubricating Airframe Pivot & Track Roller s Dimensionally Equivalent to AS24462 Series B / Bore Dia. D / Roller Outer Dia. W / Inner Race Width H / Outer Race Width E Numbers Radius or 45 Deg Chamfer to Clear Fillet Rad Inch mm Inch mm Inch mm Inch mm Inch mm KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP A R / Radius or 45 Deg Chamfer Radial Static Axial Static Numbers Thrust Ring Dia (Ref) (See Notes 1 & 2) Inch mm Inch mm lbs kn lbs kn lbs g KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP KRP NOTES 1. Load ratings shown are based on KAron V liner system. 2. Loads shown are based on liner capacity only. KRP506 Series KRP KAron Prefix 506 Airframe/Pivot/Roller Series Stud ( in 1/16 increments) V KAron V Liner (See Table 1 for liner Options) KRP V T Z D P T Add T for Track Roller (Custom 455 Outer Race) Option Z Add Z for Seal Option D Add D for 440C Outer Race Option P Add P for OD Cadmium Plate Option (per AMS-QQ-P-416 Type II, Class 2) D Add Suffix D To Part Number for 440C Outer Race AMS 5630 Rc T Add Suffix T for Track Roller Option AMS 5617 Outer Race Custom 455 Rc 47 MIN Z Add Suffix Z To P/N for Seal Option (Acetal Resin or Nylon) Liner KAron V Thrust Ring AMS 5643 (17-4PH) Rc 40 MIN (COND H900 Reference) Inner Race AMS 5643 (17-4PH) Rc 40 MIN (COND H900 Reference) Outer Race AMS 5643 (17-4PH) Rc 28 MIN (COND H1150 Reference) For all Sizes: to inches to mm Axial Play to inches to mm KRP506 / AS24462 * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 246 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 247

125 Track Rollers / Cam Followers KAron Molded Liner Track Rollers/ Cam Followers KRP( ) Series / AS27640 Self-Lubricating Airframe/Pivot s Dimensionally Equivalent to AS27640 Series KRP( ) Series / AS27640 B / Bore Dia. D / Roller Outer Dia. W / Inner Race Width H / Outer Race Width E / Radius or 45 Deg Chamfer Numbers Inch mm Inch mm Inch mm Inch mm Inch mm KRP KRP KRP KRP KRP KRP A C / 45 Deg Chamfer Radial Static Axial Static Numbers Thrust Ring Dia (Ref) (See Notes 1 & 2) Inch mm Inch mm lbs kn lbs kn lbs g KRP KRP KRP KRP KRP KRP KRP ( ) Series KRP KAron Prefix Stud ( in 1/16 increments) KRP 06 V Z P V KAron V Liner (See Table 1 for liner Options) Z Track Roller Application Add Z for Seal Option P Add P for OD Cadmium Plate Option (per AMS-QQ-P-416 Type II, Class 2) Z Add Suffix Z To P/N for Seal Option (Acetal Resin or Nylon) Liner KAron V Thrust Ring AMS 5643 (17-4PH) Rc 40 MIN (COND H900 Reference) Inner Race AMS 5643 (17-4PH) Rc 40 MIN (COND H900 Reference) Outer Race AMS 5643(17-4PH) Rc 28 MIN (COND H1150 Reference) For all Sizes: to inches to mm Axial Play to inches to mm NOTES 1. Load ratings shown are based on KAron V liner system. 2. Loads shown are based on liner capacity only. * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 248 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 249

126 Track Rollers / Cam Followers KAron Molded Liner Track Rollers/ Cam Followers KRP ( ) A Series / AS27641 Self-Lubricating Narrow Airframe/Pivot s Dimensionally Equivalent to AS27641 Series B / Bore Dia. D / Roller Outer Dia. W / Inner Race Width H / Outer Race Width E / 45 Deg Chamfer Numbers Inch mm Inch mm Inch mm Inch mm Inch mm KRP03A KRP04A KRP05A KRP06A KRP08A KRP10A KRP12A KRP16A KRP20A A C / 45 Deg Chamfer Radial Static Axial Static Numbers Thrust Ring Dia (Ref) (See Notes 1 & 2) Inch mm Inch mm lbs kn lbs kn lbs g KRP03A KRP04A KRP05A KRP06A KRP08A KRP10A KRP12A KRP16A KRP20A NOTES 1. Load ratings shown are based on KAron V liner system. 2. Loads shown are based on liner capacity only. KRP ( ) A Series KRP KAron Prefix Stud ( in 1/16 increments) A Narrow Airframe/ Pivot KRP 06 A V Z P V KAron V Liner Z Add Z for Seal Option P Add P for OD Cadmium Plate Option (per AMS-QQ-P-416 Type II, Class 2) Z Add Suffix Z To P/N for Seal Option (Acetal Resin or Nylon) Liner KAron V Thrust Ring AMS 5643 (17-4PH) Rc 40 MIN (COND H900 Reference) Inner Race AMS 5643 (17-4PH) Rc 40 MIN (COND H900 Reference) Outer Race AMS 5643(17-4PH) Rc 28 MIN (COND H1150 Reference) KRP ( ) A Series / AS27641 For all Sizes: to inches to mm Axial Play to inches to mm * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 250 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 251

127 Track Rollers / Cam Followers KAron Molded Liner Track Rollers/ Cam Followers KRP ( ) B Series / AS27642 Self-Lubricating Airframe/Pivot s Dimensionally Equivalent to AS27642 Series B / Bore Dia. D / Roller Outer Dia. W / Inner Race Width H / Outer Race Width E / 45 Deg Chamfer Numbers Inch mm Inch mm Inch mm Inch mm Inch mm KRP16B KRP21B KRP23B KRP25B KRP29B KRP33B KRP37B KRP47B KRP49B A C / 45 Deg Chamfer Radial Static Axial Static Numbers Thrust Ring Dia (Ref) (See Notes 1 & 2) Inch mm Inch mm lbs kn lbs kn lbs g KRP16B KRP21B KRP23B KRP25B KRP29B KRP33B KRP37B KRP47B KRP49B NOTES 1. Load ratings shown are based on KAron V liner system. 2. Loads shown are based on liner capacity only. KRP ( ) B Series KRP KAron Prefix Bore ( in 1/16 increments) B Airframe/Pivot KRP 16 B V Z P V KAron V Liner Z Add Z for Seal Option P Add P for OD Cadmium Plate Option (per AMS-QQ-P-416 Type II, Class 2) Z Add Suffix Z To P/N for Seal Option (Acetal Resin or Nylon) Liner KAron V Thrust Ring AMS 5643 (17-4PH) Rc 40 MIN (COND H900 Reference) Inner Race AMS 5643 (17-4PH) Rc 40 MIN (COND H900 Reference) Outer Race AMS 5643(17-4PH) Rc 28 MIN (COND H1150 Reference) KRP ( ) B Series / AS27642 For all Sizes: to inches to mm Axial Play to inches to mm * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 252 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 253

128 Track Rollers / Cam Followers KAron Molded Liner Track Rollers/ Cam Followers KRP ( ) BS Series / AS27648 Self-Lubricating Torque Tube Airframe Pivot s Dimensionally Equivalent to AS27648 Series B / Bore Dia. D / Roller Outer Dia. W / Inner Race Width H / Outer Race Width E / 45 Deg Chamfer Numbers Inch mm Inch mm Inch mm Inch mm Inch mm KRP16BS KRP21BS KRP23BS KRP25BS KRP29BS KRP33BS KRP37BS KRP47BS KRP48BS KRP49BS A C / 45 Deg Chamfer J Radial Static Axial Static Numbers Thrust Ring Dia (Ref) To Sharp Corner (Ref) (See Notes 1 & 2) Inch mm Inch mm Inch mm lbs kn lbs kn lbs g KRP16BS KRP21BS KRP23BS KRP25BS KRP29BS KRP33BS KRP37BS KRP47BS KRP48BS KRP49BS NOTES 1. Load ratings shown are based on KAron V liner system. 2. Loads shown are based on liner capacity only. KRP ( ) BS Series KRP KAron Prefix Bore ( in 1/16 increments) BS Self-Aligning Torque Tube KRP 23 BS V Z P V KAron V Liner Z Add Z for Seal Option P Add P for OD Cadmium Plate Option (per AMS-QQ-P-416 Type II, Class 2) Z Add Suffix Z To P/N for Seal Option (Acetal Resin or Nylon) Liner KAron V Thrust Ring AMS 5643 (17-4PH) Rc 40 MIN (COND H900 Reference) Outer Race Self-Aligning Ring AMS 5643 (17-4PH) Rc 28 MIN (COND H1150 Reference) Inner Race AMS 5643 (17-4PH) Rc 40 MIN (COND H900 Reference) Outer Race AMS 5643(17-4PH) Rc 40 MIN (COND H900 Reference) KRP ( ) BS Series / AS27648 For all Sizes: to inches to mm Axial Play to inches to mm * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 254 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 255

129 Track Rollers / Cam Followers KAron Molded Liner Track Rollers/ Cam Followers KRP ( ) P Series / AS27644 KAron Lined Self-Lubricating Wide Airframe/Pivot s Dimensionally Equivalent to AS27644 Series KRP ( ) P Series / AS27644 B / Bore Dia. D / Roller Outer Dia. W / Inner Race Width H / Outer Race Width E / 45 Deg Chamfer Numbers Inch mm Inch mm Inch mm Inch mm Inch mm KRP03P KRP04P KRP05P KRP06P KRP08P KRP10P A C / 45 Deg Chamfer Radial Static Axial Static Numbers Thrust Ring Dia (Ref) (See Notes 1 & 2) Inch mm Inch mm lbs kn lbs kn lbs g KRP03P KRP04P KRP05P KRP06P KRP08P KRP10P KRP ( ) P Series KRP KAron Prefix Bore ( in 1/16 increments) P Wide Airframe/Pivot V KAron V Liner Z Add Z for Seal Option P Add P for OD Cadmium Plate Option (per AMS-QQ-P-416 Type II, Class 2) Z Add Suffix Z To P/N for Seal Option (Acetal Resin or Nylon) Liner KAron V Thrust Ring AMS 5643 (17-4PH) Rc 40 MIN (COND H900 Reference) Inner Race AMS 5643 (17-4PH) Rc 40 MIN (COND H900 Reference) Outer Race AMS 5643(17-4PH) Rc 28 MIN (COND H1150 Reference) For all Sizes: to inches to mm Axial Play to inches to mm KRP 06 P V Z P NOTES 1. Load ratings shown are based on KAron V liner system. 2. Loads shown are based on liner capacity only. * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 256 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 257

130 Track Rollers / Cam Followers KAron Molded Liner Track Rollers/ Cam Followers KRP ( ) B500 Series / AS27646 Self-Lubricating Narrow Airframe Pivot s Dimensionally Equivalent to AS27646 Series B / Bore Dia. D / Roller Outer Dia. W / Inner Race Width H / Outer Race Width Numbers Inch mm Inch mm Inch mm Inch mm KRPB KRPB KRPB KRPB KRPB KRPB KRPB / / / / KRPB / / / / KRPB / / / / E / 45 Deg Chamfer A C / 45 Deg Chamfer Radial Static Axial Static Numbers Thrust Ring Dia (Ref) (See Notes 1 & 2) Inch mm Inch mm Inch mm lbs kn lbs kn lbs g KRPB KRPB KRPB KRPB KRPB KRPB KRPB KRPB KRPB KRP ( ) 500 Series KRP KAron Prefix Bore ( in 1/16 increments) V KAron V Liner KRPB 540 V Z P Z Add Z for Seal Option P Add P for OD Cadmium Plate Option (per AMS-QQ-P-416 Type II, Class 2) Z Add Suffix Z To P/N for Seal Option (Acetal Resin or Nylon) Liner KAron V Thrust Ring AMS 5643 (17-4PH) Rc 40 MIN (COND H900 Reference) Inner Race AMS 5643 (17-4PH) Rc 40 MIN (COND H900 Reference) Outer Race AMS 5643(17-4PH) Rc 28 MIN (COND H1150 Reference) KRP ( ) B500 Series / AS27646 For all Sizes: to inches to mm Axial Play to inches to mm * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. NOTES 1. Load ratings shown are based on KAron V liner system. 2. Loads shown are based on liner capacity only. 258 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 259

131 Journal s Product Overview Journal s 260

132 Journal s Journal s Product Overview Table of Contents Product Page Product Page Journal s Fraslip Fabric Liner ABS ABS EN EN FBPA...A... / FBPA...C FBPA1 / FBPA EN EN ABS D ABS F ABS D ABS F EN4535 2D EN4535 2F EN4537 2D EN4537 2F FBFA...A... / FBFA...C FBFA1 / FBFA NSA8147 / NSA EN EN KAron Molded Liner KRJ / AS KRJ-U / AS

133 Journal s Fraslip Fabric Liner Journal s ABS2041 Self-Lubricating Aluminium Cylindrical Type For Titanium Shaft According to Specification ABS2045 / EN2311 ABS2041 Nominal d D Length L mm / Inch ±0.013 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch NOTES Static C s : C s = 0.29 d (L - 2) [kn] ABS2041 continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 265

134 Journal s Fraslip Fabric Liner Journal s Fraslip Fabric Liner ABS2041 ABS2041 Length L mm / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / Inch ABS2041A ABS2041A Length Material EN2318 / T3511 / Alloy 2024; Anodized Liner FRASLIP F per EN2311 / SAE AS81934 Technical Specification ABS2045 mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 267

135 Journal s Fraslip Fabric Liner Journal s ABS2043 Self-Lubricating CRES Cylindrical Type For Titanium Shafts According to Specification ABS2045 / EN2311 ABS2043 Nominal d D Length L mm / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch NOTES Static C s : C s = d (L - 2) [kn] Length L mm / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch ABS2043 continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 269

136 Journal s Fraslip Fabric Liner Journal s Fraslip Fabric Liner ABS2043 ABS2043 Length L mm / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / Inch ABS2043A ABS2043A Length Material EN3161 / / 17-4PH H1150 Liner FRASLIP F per EN2311 / SAE AS81934 Technical Specification ABS2045 mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 271

137 Journal s Fraslip Fabric Liner Journal s EN4534 Self-Lubricating Aluminium Cylindrical Type According to Specification EN2311 / SAE AS81934 EN4534 Nominal d D Length L mm / Inch ±0.013 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch NOTES Static C s : C s = 0.29 d (L - 2) [kn] Length L mm / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch EN4534 continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 273

138 Journal s Fraslip Fabric Liner Journal s Fraslip Fabric Liner EN4534 EN4534 Length L mm / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / Inch EN EN R 006 R Surface Treatment No : None R: Anodized 006 Length Material EN2318 / T3511 / Alloy 2024 Liner FRASLIP F per EN2311 / SAE AS81934 Technical Specification EN2311 / SAE AS81934 mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch KAMAN Specialty s and Engineered Products 275 KAMAN Specialty s and Engineered Products

139 Journal s Fraslip Fabric Liner Journal s EN4536 Self-Lubricating CRES Cylindrical Type According to Specification EN2311 / SAE AS81934 EN4536 Nominal d D Length L mm / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch NOTES Static C s : C s = d (L - 2) [kn] Length L mm / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch EN4536 continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 277

140 Journal s Fraslip Fabric Liner Journal s Fraslip Fabric Liner EN4536 EN4536 Length L mm / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / Inch EN EN T 007 T Surface Treatment No : None T: Passivated 007 Length Material EN3161 / / 17-4PH H1150 Liner FRASLIP F per EN2311 / SAE AS81934 Technical Specification EN2311 / SAE AS81934 mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch KAMAN Specialty s and Engineered Products 279 KAMAN Specialty s and Engineered Products

141 Journal s Fraslip Fabric Liner Journal s FBPA A / FBPA C Self-Lubricating Aluminium CRES Cylindrical Type According to Specification EN2311 / SAE AS81934 FBPA A / FBPA C Nominal d D Δ Dmp Δ Dmp Length L mm / mm Inch / Inch C A mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± NOTES Static C s : Material A: C s = d (L ) [kn] Material C: C s = d (L ) [kn] Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch FBPA A / FBPA C continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 281

142 Journal s Fraslip Fabric Liner Journal s Fraslip Fabric Liner FBPA A / FBPA C FBPA A / FBPA C Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch FBPA 08 FBPA 08 A 010 P A Material 010 Length P Surface Treatment No : None P: Cadmium Plated (Material C Only) Material A: EN2318 / Alloy 2024 / ; Anodized C: EN3161 / / 17-4PH H1150 Liner FRASLIP F per EN2311 / SAE AS81934 Technical Specification EN2311 / SAE AS81934 Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 283

143 Journal s Fraslip Fabric Liner Journal s FBPA1 / FBPA2 FBPA1 / FBPA2 Self-Lubricating Aluminium CRES Cylindrical Type Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Nominal d D g x 45 Max. Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch FBPA FBPA Material Length Material 1: EN3490 / / AISI431 2: EN2086 / / Alloy 2618A; Anodized Liner FRASLIP F per EN2311 / SAE AS81934 Technical Specification AS8943 NOTES Static C s : FBPA1: C s = d (L ) [kn] FBPA2: C s = d (L ) [kn] 284 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 285

144 Journal s Fraslip Fabric Liner Journal s EN2285 Self-Lubricating Aluminium Cylindrical Type According to Specification EN2311 / SAE AS81934 EN2285 d Δ dmp D Δ Dmp mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to Length L -0.1 mm / -0.4 mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch EN Length A Bonded Liner Technology Material EN2086 / / Alloy 2618A; Anodized Liner FRASLIP F per EN2311 / SAE AS81934 NOTES Static C s = d (L - 2) [kn] EN A Technical Specification EN2311 / SAE AS81934 EN2285 continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 287

145 Journal s Fraslip Fabric Liner Journal s Fraslip Fabric Liner EN2285 EN2285 Length L -0.1 mm / -0.4 mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L -0.1 mm / -0.4 mm Inch / Inch mm Inch mm Inch mm Inch mm Inch USA: Kamatics Corporation 1330 Blue Hills Avenue Bloomfield, CT USA Tel: KSB@kaman.com Germany: RWG Germany GmbH Medbacher Weg 1 D Höchstadt a. d. Aisch Tel: +49 (91 93) RWG@kaman.com 288 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 289

146 Journal s Fraslip Fabric Liner Journal s EN2287 Self-Lubricating CRES Cylindrical Type According to Specification EN2311 / SAE AS81934 EN2287 d Δ dmp D Δ Dmp mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to Length L mm / -0.4 mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch EN2287 Number of EN Standard Length A Bonded Liner Technology Material EN3490 / / AISI 431 Liner FRASLIP F per EN2311 / SAE AS81934 NOTES Static C s : C s = 0.43 d (L - 2) [kn] EN A Technical Specification EN2311 / SAE AS81934 EN2287 continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 291

147 Journal s Fraslip Fabric Liner Journal s Fraslip Fabric Liner EN2287 EN2287 Length L mm / -0.4 mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / -0.4 mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch USA: Kamatics Corporation 1330 Blue Hills Avenue Bloomfield, CT USA Tel: KSB@kaman.com Germany: RWG Germany GmbH Medbacher Weg 1 D Höchstadt a. d. Aisch Tel: +49 (91 93) RWG@kaman.com 292 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 293

148 Journal s Fraslip Fabric Liner Journal s ABS2042 D Self-Lubricating Aluminium Flanged Type For Titanium Shaft According to Specification ABS2045 / EN2311 ABS2042 D Nominal d D L 1 D 1 g ±0.013 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch NOTES Static Radial s C s : C s = 0.29 d (L 2 - L 1-2) [kn] Static Axial s C a : C a = 0.16 [(D 1-1.5) 2 - (d + 2.5) 2 ] [kn] Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch ABS2042 D continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 295

149 Journal s Fraslip Fabric Liner Journal s Fraslip Fabric Liner ABS2042 D ABS2042 D Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / mm Inch / Inch ABS2042A D ABS2042A 04 D Length Material EN2318 / T3511 / Alloy 2024; Anodized Liner FRASLIP F per EN2311 / SAE AS81934 Technical Specification ABS2045 mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 297

150 Journal s Fraslip Fabric Liner Journal s ABS2042 F Self-Lubricating CRES Flanged Type For Titanium Shaft According to Specification ABS2045 / EN2311 ABS2042 F Nominal d D L 1 D 1 g Max ±0.013 ± ±0.130 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch R Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch NOTES Static Radial s C s : C s = 0.29 d (L 2 - L 1-2) [kn] Static Axial s Ca: C a = 0.16 [(D 1-1.5) 2 - (d + 2.5) 2 ] [kn] ABS2042 F continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 299

151 Journal s Fraslip Fabric Liner Journal s Fraslip Fabric Liner ABS2042 F ABS2042 F Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / mm Inch / Inch ABS2042A F ABS2042A 04 F Length Material EN2318 / T3511 / Alloy 2024; Anodized Liner FRASLIP F per EN2311 / SAE AS81934 Technical Specification ABS2045 mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 301

152 Journal s Fraslip Fabric Liner Journal s ABS2044 D Self-Lubricating CRES Flanged Type According to Specification ABS2045 / EN2311 ABS2044 D Nominal d D L 1 D 1 g ±0.013 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch NOTES Static Radial s C s : C s = d (L 2 - L 1-2) [kn] Static Axial s C a : C a = 0.34 [(D 1-1.5) 2 - (d + 2.5) 2 ] [kn] (max.) Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch ABS2044 D continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 303

153 Journal s Fraslip Fabric Liner Journal s Fraslip Fabric Liner ABS2044 D ABS2044 D Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / mm Inch / Inch ABS2044A D ABS2044A 04 D Length Material EN3161 / / 17-4PH H1150 Liner FRASLIP F per EN2311 / SAE AS81934 Technical Specification ABS2045 mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 305

154 Journal s Fraslip Fabric Liner Journal s ABS2044 F Self-Lubricating CRES Flanged Type According to Specification ABS2045 / EN2311 ABS2044 F Nominal d D L 1 D 1 g (max.) ±0.130 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch R Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch NOTES Static Radial s C s : C s = d (L - L - 2) [kn] 2 1 Static Axial s Ca: C a = 0.34 [(D 1-1.5) 2 - (d + 2.5) 2 ] [kn] ABS2044 F continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 307

155 Journal s Fraslip Fabric Liner Journal s Fraslip Fabric Liner ABS2044 F ABS2044 F Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / mm Inch / Inch ABS2044A F ABS2042A 04 F Length Material EN3161 / / 17-4PH H1150 Liner FRASLIP F per EN2311 / SAE AS81934 Technical Specification ABS2045 mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch KAMAN Specialty s and Engineered Products 309 KAMAN Specialty s and Engineered Products

156 Journal s Fraslip Fabric Liner Journal s EN4535 2D Self-Lubricating Aluminium Flanged Type According to Specification EN2311 / SAE AS81934 EN4535 2D Nominal d D L 1 D 1 g ±0.013 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch NOTES Static Radial s C s : C s = 0.29 d (L 2 - L 1-2) [kn] Static Axial s Ca: C a = 0.16 [(D 1-1.5) 2 - (d + 2.5) 2 ] [kn] (max.) Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch EN4535 2D continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 311

157 Journal s Fraslip Fabric Liner Journal s Fraslip Fabric Liner EN4535 2D EN4535 2D Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch EN4535 2D 04 EN4535 2D 04 R 006 R Surface Treatment No : None R: Anodized 006 Length Material EN2318 / T3511 / Alloy 2024 Liner FRASLIP F per EN2311 / SAE AS81934 Technical Specification EN2311 / SAE AS81934 Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 313

158 Journal s Fraslip Fabric Liner Journal s EN4535 2F Self-Lubricating Aluminum Flanged Type According to Specification EN2311 / SAE AS81934 EN4535 2F Nominal d D L 1 D 1 g (max.) ±0.013 ± ±0.130 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch R Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch NOTES Static Radial s C s : C s = 0.29 d (L 2 - L 1-2) [kn] Static Axial s C a : C a = 0.16 [(D 1-1.5) 2 - (d + 2.5) 2 ] [kn] EN4535 2F continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 315

159 Journal s Fraslip Fabric Liner Journal s Fraslip Fabric Liner EN4535 2F EN4535 2F Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch EN4535 2F 04 EN4535 2F 04 R 006 R Surface Treatment No : None R: Anodized 006 Length Material EN2318 / T3511 / Alloy 2024 Liner FRASLIP F per EN2311 / SAE AS81934 Technical Specification EN2311 / SAE AS81934 Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 317

160 Journal s Fraslip Fabric Liner Journal s EN4537 2D Self-Lubricating CRES Flanged Type According to Specification EN2311 / SAE AS81934 EN4537 2D Nominal d D L 1 D 1 g ±0.013 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch NOTES Static Radial s C s : C s = d (L 2 - L 1-2) [kn] Static Axial s Ca: C a = 0.34 [(D 1-1.5) 2 - (d + 2.5) 2 ] [kn] (max.) Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch EN4537 2D continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 319

161 Journal s Fraslip Fabric Liner Journal s Fraslip Fabric Liner EN4537 2D EN4537 2D Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch EN4537 2D 04 EN4537 2D 04 T 006 T Surface Treatment No : None T: Passivated 006 Length Material EN3161 / / 17-4PH H1150 Liner FRASLIP F per EN2311 / SAE AS81934 Technical Specification EN2311 / SAE AS81934 Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 321

162 Journal s Fraslip Fabric Liner Journal s EN4537 2F Self-Lubricating CRES Flanged Type According to Specification EN2311 / SAE AS81934 EN4537 2F Nominal d D L 1 D 1 g x 45 (max.) ±0.013 ± ±0.130 ± mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch R Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch NOTES Static Radial s C s : C s = d (L 2 - L 1-2) [kn] Static Axial s C a : C a = 0.34 [(D 1-1.5) 2 - (d + 2.5) 2 ] [kn] EN4537 2F continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 323

163 Journal s Fraslip Fabric Liner Journal s Fraslip Fabric Liner EN4537 2F EN4537 2F Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch EN4537-2F 04 EN4535 2F 04 T 006 T Surface Treatment No : None T: Passivated 006 Length Material EN3161 / / 17-4PH H1150 Liner FRASLIP F per EN2311 / SAE AS81934 Technical Specification EN2311 / SAE AS81934 Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 325

164 Journal s Fraslip Fabric Liner Journal s FBFA A / FBFA C Self-Lubricating Aluminium CRES Flanged Type According to Specification EN2311 / SAE AS81934 / 2 FBFA A / FBFA C Nominal d D Δ Dmp Δ Dmp L 1 D C A mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± ±0.012 ± NOTES Static C s : Material A: C s = d (L 1 + L 2-3.3) [kn] Material C: C s = d (L 1 + L 2-3.3) [kn] Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch FBFA A / FBFA C continued on pg 328. Static Axial s C a : Material A: C a = 0.16 [(D 1-1.5) 2 - (d + 2.5) 2 ] [kn] Material C: C a = 0.34 [(D 1-1.5) 2 - (d + 2.5) 2 ] [kn] 326 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 327

165 Journal s Fraslip Fabric Liner Journal s Fraslip Fabric Liner FBFA A / FBFA C FBFA A / FBFA C Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch FBFA 08 FBFA 08 A 010 P A Material 010 Length P Surface Treatment No : None P: Cadmium Plated (Material C Only) Material A: EN2318 / Alloy 2024 / ; Anodized C: EN3161 / / 17-4PH H1150 Liner FRASLIP F per EN2311 / SAE AS81934 Technical Specification EN2311 / SAE AS81934 Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 329

166 Journal s Fraslip Fabric Liner Journal s FBFA1 / FBFA2 Self-Lubricating Aluminium CRES Flanged Type Nominal d D L 1 D mm Inch mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to g 1 x 45 g 2 x 45 Length L mm / mm Inch / Inch FBFA1 / FBFA mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch FBFA 2 Material Length Material FBFA1: EN3490 / / AISI 431 FBFA2: EN2086 / / Alloy 2618A; Anodized Liner FRASLIP F per EN2311 / SAE AS81934 Technical Specification MIL-B-8943 NOTES Static Radial s C s : FBFA1: C s = d (L 2-3.3) [kn] FBFA2: C s = d (L 2-3.3) [kn] Static Axial s C a : FBFA1: C a = 0.34 [(A - 1.5) 2 - (d + 2.5) 2 ] [kn] FBFA2: C a = 0.16 [(A - 1.5) 2 - (d + 2.5) 2 ] [kn] FBFA FBFA1 / FBFA2 continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 331

167 Journal s Fraslip Fabric Liner Journal s Fraslip Fabric Liner FBFA1 / FBFA2 FBFA1 / FBFA2 Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch USA: Kamatics Corporation 1330 Blue Hills Avenue Bloomfield, CT USA Tel: KSB@kaman.com Germany: RWG Germany GmbH Medbacher Weg 1 D Höchstadt a. d. Aisch Tel: +49 (91 93) RWG@kaman.com 332 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 333

168 Journal s Fraslip Fabric Liner Journal s NSA8147 / NSA8148 Self-Lubricating Aluminium CRES Flanged Type NSA8147 / NSA8148 Nominal d D L 1 D mm Inch mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to g 1 x 45 g 2 x 45 Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch NSA8147 Number of Series Length Material NSA8147: EN3490 / / AISI 431 NSA8148: EN2086 / / Alloy 2618A; Anodized Liner FRASLIP F per EN2311 / SAE AS81934 NOTES Static Radial s C s : NSA8147: C s = d (L 2-3.3) [kn] NSA8148: C s = d (L 2-3.3) [kn] Static Axial s C a : NSA8147: C a = 0.34 [(D 1-1.5) 2 - (d + 2.5) 2 ] [kn] NSA8148: C a = 0.16 [(D 1-1.5) 2 - (d + 2.5) 2 ] [kn] NSA Technical Specification MIL-B-8943 NSA8147 / NSA8148 continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 335

169 Journal s Fraslip Fabric Liner Journal s Fraslip Fabric Liner NSA8147 / NSA8148 NSA8147 / NSA8148 Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch USA: Kamatics Corporation 1330 Blue Hills Avenue Bloomfield, CT USA Tel: KSB@kaman.com Germany: RWG Germany GmbH Medbacher Weg 1 D Höchstadt a. d. Aisch Tel: +49 (91 93) RWG@kaman.com 336 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 337

170 Journal s Fraslip Fabric Liner Journal s EN2288 Self-Lubricating CRES Flanged Type According to Specification EN2311 / SAE AS81934 EN2288 d Δ dmp D Δ Dmp D mm Inch mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to g x 45 L 1 R Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to EN Length A Bonded Liner Technology Material EN3490 / / AISI 431 Liner FRASLIP F per EN2311 / SAE AS81934 NOTES Static Radial : C s = 0.43 d (L R max. - L 1 ) [kn] Static Axial : C a = 0.34 (D 1-1.5) 2 - (d + 2.5) 2 [kn] EN A Technical Specification EN2311 / SAE AS81934 EN2288 continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 339

171 Journal s Fraslip Fabric Liner Journal s Fraslip Fabric Liner EN2288 EN2288 Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch USA: Kamatics Corporation 1330 Blue Hills Avenue Bloomfield, CT USA Tel: KSB@kaman.com Germany: RWG Germany GmbH Medbacher Weg 1 D Höchstadt a. d. Aisch Tel: +49 (91 93) RWG@kaman.com 340 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 341

172 Journal s Fraslip Fabric Liner Journal s EN2286 Self-Lubricating Aluminum Flanged Type According to Specification EN2311 / SAE AS81934 EN2286 d Δ dmp D Δ Dmp D mm Inch mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to g x 45 L 1 R Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to to EN Length A Bonded Liner Technology Material EN2086 / / Alloy 2618A; Anodized Liner FRASLIP F per EN2311 / SAE AS81934 NOTES Static Radial : C s = d (L R max. - L 1 ) [kn] Static Axial : C a = 0.16 (D 1-1.5) 2 - (d + 2.5) 2 [kn] EN A Technical Specification EN2311 / SAE AS81934 EN2286 continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 343

173 Journal s Fraslip Fabric Liner Journal s Fraslip Fabric Liner EN2286 EN2286 Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch Length L mm / mm Inch / Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch USA: Kamatics Corporation 1330 Blue Hills Avenue Bloomfield, CT USA Tel: KSB@kaman.com Germany: RWG Germany GmbH Medbacher Weg 1 D Höchstadt a. d. Aisch Tel: +49 (91 93) RWG@kaman.com 344 KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 345

174 Journal s KAron Molded Liner Journal s KRJ Series / MIL-B Sleeve Non-Flanged Lined Bore Qualified to SAE AS81934/1 with KAron B AS8943 with KAron V KRJ Series / MIL-B Numbers B Bore Dia D Outer Dia T O Size Dia D U O Size Dia D See Note 1 See Note 1 See Note 1 Inch mm Inch mm Inch mm Inch mm KRJ KRJ KRJ KRJ KRJ KRJ KRJ KRJ KRJ KRJ KRJ KRJ KRJ KRJ KRJ KRJ KRJ KRJ L Numbers Mil Spec Length Limits (Suggested) AL CRES Min Max Lbs/inch grams/mm Lbs/inch grams/mm KRJ KRJ KRJ KRJ KRJ KRJ KRJ KRJ KRJ KRJ KRJ KRJ KRJ KRJ KRJ KRJ KRJ KRJ NOTES: 1. Tolerance: CRES ( S ) = , Aluminum ( Y ) = , For Load Ratings See Page (TBD) Aluminum s Anodized per MIL-A 8625 or Chem Film per MIL-C-5541 KRJ Series continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 347

175 Journal s KAron Molded Liner KRJ Series / MIL-B Length Suffix Inch mm KRJ Number of Series Basic Journal Part Number Prefix ID (ID in 1/16 Inch Increments) S S for 17-4PH CRES Outer Housing ( Y for Aluminum) B KAron B Liner (See Table 2 For Liner Options) Outer Housing Material AMS PH CRES Condition H1150 Surface Finish Passivate Per Per AMS 2700 Cad Plate Per AMS- QQ-P-416 or Zinc-Nickel Plate per AMS 2417 P/N Symbol S KRJ 8-S B C L T Material QQ-A-200/3 Or QQ-A-225/ Aluminum Condition T851/T8511 Surface Finish Andozie Per MIL-A-8625 TYPE I Or II Or Chem Film Per MIL-C-5541 P/N Symbol Y C Cad Plate C for Cad Plate Per AMS-QQ-P-416 Type I CL 2 (For 17-4PH Only) E E for Zinc-Nickel Plate Per AMS 2417 Type 2 (For 17-4PH Only) Long (Length in 1/32 Inch Increments) L Undersize L for.010±.001 Undersized B for Reaming at Assy T Add T for.010 or U for.020 Oversize DIA D Liner Material KAron Condition N/A Surface Finish N/A P/N Symbol See Table 2 for Liner Options * Millimeter dimensions are for reference only. * Permanently marked in non-functional area. 348 KAMAN Specialty s and Engineered Products 349

176 Journal s KAron Molded Liner Journal s KRJ-U (D) Series / MIL-B Sleeve Flanged Lined Bore (Optional Lined Flange) Qualified to SAE AS81934/2 with KAron B AS8943 with KAron V KRJ Series / MIL-B Numbers B Bore Dia D Outer Dia H Flange Dia F Flange Width See Note 1 Inch mm Inch mm Inch mm Inch mm KRJ4-UD KRJ5-UD KRJ6-UD KRJ7-UD KRJ8-UD KRJ9-UD KRJ10-UD KRJ11-UD KRJ12-UD KRJ14-UD KRJ16-UD KRJ18-UD KRJ20-UD KRJ22-UD KRJ24-UD KRJ26-UD KRJ28-UD KRJ32-UD NOTES 1. Tolerance: CRES ( S ) = , Aluminum ( Y ) = , For Load Ratings See Page (TBD) 3. Aluminum s Anodized per MIL-A 8625 or Chem Film per MIL-C Add this to Journal on page (TBD) Numbers T O Size Dia D U O Size Dia D L Flange (Ref) Note 4 See Note 1 See Note 1 Mil Spec Length Limits (Suggested) AL CRES Inch mm Inch mm Min Max Inch-lbs grams Inch-lbs grams KRJ4-UD KRJ5-UD KRJ6-UD KRJ7-UD KRJ8-UD KRJ9-UD KRJ10-UD KRJ11-UD KRJ12-UD KRJ14-UD KRJ16-UD KRJ18-UD KRJ20-UD KRJ22-UD KRJ24-UD KRJ26-UD KRJ28-UD KRJ32-UD KRJ-U (D) Series continued on pg KAMAN Specialty s and Engineered Products KAMAN Specialty s and Engineered Products 351

177 Journal s KAron Molded Liner KRJ U (D) Series / MIL-B Length Suffix Inch mm KRJ Number of Series Basic Journal Part Number Prefix ID (ID in 1/16 Inch Increments) U U Designates Flanged Journal D D for KAron Lined Flange Outer Housing Material AMS PH CRES Condition H1150 Surface Finish Passivate Per AMS 2700 Cad Plate Per AMS-QQ-P-416 or Zinc-Nickel Plate per AMS 2417 P/N Symbol S S S for 17-4PH CRES Outer Housing ( Y for Aluminum) B KAron B Liner (See Table 2 For Liner Options) C Cad Plate C for Cad Plate Per QQ-P-35 Type I CL 2 (For 17-4PH Only) Material QQ-A-200/3 Or QQ-A-225/ Aluminum Condition T851/T8511 Surface Finish Andozie Per MIL-A-8625 TYPE I Or II Or Chem Film Per MIL-C-5541 P/N Symbol Y KRJ 8- U D S B C L T E E for Zinc-Nickel Plate Per AMS 2417 Type 2 (For 17-4PH Only) Long (Length in 1/32 Inch Increments) L L for.010±.001 Undersized B for Reaming at Assy T Add T for.010 or U for.020 Oversize DIA D Liner Material KAron Condition N/A Surface Finish N/A P/N Symbol See Table 2 for Liner Options * Millimeter dimensions are for reference only. * Permanently marked in non-functional area Kamatics Corporation. All rights reserved. KAMAN is the Registered Trademark of Kaman Corporation. KAMATICS, KARON, KATHERM are Registered Trademarks of Kamatics Corporation. 352 KAMAN Specialty s and Engineered Products 353

178 Kaman Corporation 1330 Blue Hills Avenue Bloomfield, Connecticut USA