Roper Whitney Hand Punch and Die Catalog Standard Round Size Hand Tools

Transcription

1 Roper Whitney Hand and Catalog Standard Round Hand Tools n merican Tradition Since 1910

2 How to Order WHEN ORDERING PLESE SPECIFY: 1) The type of tool or machine the tooling will be used in, if not a Roper Whitney tool or machine; the manufacturer s name and model number. 2) The size and type of hole to be punched. 3) The 9 digit part number for each punch and each die. 4) The type of material and the thickness of the material to be punched. 5) The clearance required in the die. 6) ny special markings or deviations from standard styles or sizes. If you should have any questions, please consult our sales department at Table of Contents Tooling for the No. 5 Junior Hand 4-5 Tooling for the No. XX Hand 6-8 Tooling for the No. 7 Hand 9-11 Tooling for the No. 8 Hand Tooling for the No. 10 and No. 12 Ball Bearing Tooling for the No. 16 Bench Tooling for the No. 17 Bench Tooling for the No. CTL20 Ball Bearing Tooling for the No. 20 Ball Bearing Roper Whitney Standard Terms and Conditions 28 Ordering Information 28 2

3 PUNCH and DIE ORDER FORM 1. WHT PUNCHING UNIT DO YOU HVE? 2. WHT SHPE IS NEEDED (CHOOSE ONE: 1=ROUND, 2=OBROUND-M, 3=RECTNGLE-N, 4=DOUBLE D - P, 5=SINGLE D, 6=TRINGLES-S, 7=SQURE-R, 8=SPECIL SHPE PLESE GIVE DRWING OR SKETCH)? 3. SIZE OF SHPE (TWO DIMENSIONS REQUIRED)? 4. BLNKING OR NOT BLNKING (BLNKING IS WHEN YOU RE GOING TO SVE THE PIECE BEING PUNCHED) 5. MTERIL BEING PUNCHED? -MILD STEEL, STINLEES STEEL, ETC.? B-THICKNESS OF MTERIL or GUGE? 6. IF YOU RE NOT SURE WHT UNIT IT IS, CIRCLE ONE THT MTCHES THE STYLE PUNCH and DIE BELOW: 3

4 NO. 5 JUNIOR HND PUNCH TYPE O Round es and s Standard s, Drill, or Millimeter Set Part Part Replacement Package Consists of 1ea. 3/32, 1/8, 5/32, 3/16, 7/32, 1/4 & 9/32 P&D T-6 Set 1/ $ $ $14.00 T-9 5/ $ $ $14.00 T-9 3/32-42 DS $ $ $14.00 T-9 7/ $ $ $14.00 T-9 1/ $ $ $14.00 T-9 30 DS $ $ $14.00 T-9 9/64-28 DS $ $ $14.00 T-9 5/ $ $ $14.00 T-9 11/ $ $ $14.00 T-9 3/ $ $ $14.00 T-9 13/ $ $ $14.00 T-9 7/ $ $ $14.00 T-9 15/64- DS $ $ $14.00 T-9 1/4-E DS $ $ $14.00 T-9 17/64-H DS $ $ $14.00 T-9 9/32-K DS $ $ $14.00 T-9 MIN. : MX. : T T-5 Under add 50% to Non Stock P&D. ll round punches with annealed heads. T-5 ll round punches with four eccentric slots. T-5 TYPE M Obround es and s STNDRD SIZES x B x B 1/8 x 1/ x T-7 1/8 x 9/ x T-7 4

5 NO. 5 JUNIOR HND PUNCH Width sizes under add 50% to the punch and die. Width sizes 0.63 thru add 30% to the punch & die T-5 SPECIL PURPOSE PUNCHES and DIES COUNTERSINKING PUNCHES and DIES STNDRD SIZES 3/ T-7 1/ T-7 5/ T-7 For pricing and delivery information on non-stock sizes, consult our sales department. SNP LOCK PUNCHES and DIES STNDRD SIZES x B x B For pricing and delivery information on non-stock sizes, consult our sales department. 5/16 x 1/ x T-7 BUTTON PUNCHES and DIES STNDRD SIZES 3 THICKNESS of 22 GUGE For pricing and delivery information on non-stock sizes, consult our sales department. FOR PRICING and DELIVERY INFORMTION ON OTHER SPECIL CONFIGURTION PUNCHES ND DIES NOT LISTED, CONSULT OUR SLES DEPRTMENT T-7 5

6 NO. XX HND PUNCH TYPE O Round es and s Standard s, Drill, or Millimeter Set Part Part Replacement Package Consists of 1ea. 5/32, 7/32, 9/32, 11/32, 13/32, 15/32 & 17/32 P&D T-6 Set 1/ $ $ $25.00 T-7 5/ $ $ $25.00 T-7 3/32-42 DS $ $ $25.00 T-7 7/ $ $ $25.00 T-7 1/ $ $ $22.00 T-7 9/64-28 DS $ $ $22.00 T-7 5/ $ $ $22.00 T-7 11/ $ $ $22.00 T-7 3/ $ $ $22.00 T-7 13/ $ $ $22.00 T-7 7/ $ $ $22.00 T-7 15/64- DS $ $ $22.00 T-7 1/4-E DS $ $ $22.00 T-7 17/64-H DS $ $ $22.00 T-7 9/32-K DS $ $ $22.00 T-7 19/ $ $ $22.00 T-7 5/ $ $ $22.00 T-7 21/ $ $ $22.00 T-7 11/ $ $ $22.00 T-7 23/ $ $ $22.00 T-7 3/ $ $ $22.00 T-7 25/ $ $ $22.00 T-7 13/ $ $ $22.00 T-7 27/ $ $ $22.00 T-7 7/ $ $ $22.00 T-7 29/ MM $ $ $22.00 T-7 15/ $ $ $22.00 T-7 31/ $ $ $22.00 T-7 1/ $ $ $22.00 T-7 33/ $ $ $22.00 T-7 17/ $ $ $22.00 T-7 6

7 PRICING FOR NON-STOCK ROUNDS MIN. : MX. : s for non-stock sizes (drill, millimeter, or fractional) Determine the dimension (diameter) NO. XX HND PUNCH T T-5 Under add 50% to Non Stock P&D. x B 1/4 x 7/ x T-7 Width sizes under add 50% to the punch and die. Width sizes 0.63 thru add 30% to the punch & die T-5 MX.531 MX.531 MX.391 MX.525 MX.531 MX.531 MX.479 MX.483 SPECIL PURPOSE PUNCHES and DIES COUNTERSINKING PUNCHES and DIES STNDRD SIZES 3/ T-7 1/ T-7 5/ T-7 For pricing and delivery information on non-stock sizes, consult our sales department. 7

8 NO. XX HND PUNCH SNP LOCK PUNCHES and DIES STNDRD SIZES x B x B 7/16 x 3/ x T-7 For pricing and delivery information on non-stock sizes, consult our sales department. BUTTON PUNCHES and DIES STNDRD SIZES 3 THICKNESS of 22 GUGE T-7 For pricing and delivery information on non-stock sizes, consult our sales department. FOR PRICING and DELIVERY INFORMTION ON OTHER SPECIL CONFIGURTION PUNCHES ND DIES NOT LISTED, CONSULT OUR SLES DEPRTMENT. 8

9 NO. 7 HND PUNCH TYPE O Round es and s Standard s, Drill, or Millimeter Set Part Set 1/ $ $ $23.00 T-7 5/ $ $ $23.00 T-7 3/32-42 DS $ $ $23.00 T-7 7/ $ $ $23.00 T-7 1/ $ $ $21.00 T-7 9/64-28 DS $ $ $21.00 T-7 5/ $ $ $21.00 T-7 11/ $ $ $21.00 T-7 3/ $ $ $21.00 T-7 13/ $ $ $21.00 T-7 7/ $ $ $21.00 T-7 15/64- DS $ $ $21.00 T-7 1/4-E DS $ $ $21.00 T-7 17/64-H DS $ $ $21.00 T-7 9/32-K DS $ $ $21.00 T-7 19/ $ $ $21.00 T-7 5/ $ $ $21.00 T-7 21/ $ $ $21.00 T-7 11/ $ $ $21.00 T-7 23/ $ $ $21.00 T-7 3/ $ $ $21.00 T-7 25/ $ $ $21.00 T-7 13/ $ $ $21.00 T-7 27/ $ $ $21.00 T-7 7/ $ $ $21.00 T-7 9

10 PRICING FOR NON-STOCK ROUNDS MIN. : MX. : s for non-stock sizes (drill, millimeter, or fractional) Determine the dimension (diameter) NO. 7 HND PUNCH T T-5 Under add 50% to Non Stock P&D. x B 1/4 x 7/ x T-7 Width sizes under add 50% to the punch and die. Width sizes 0.63 thru add 30% to the punch & die T-5 SPECIL PURPOSE PUNCHES and DIES COUNTERSINKING PUNCHES and DIES STNDRD SIZES 3/ * T-5 PUNCH T-7 DIE 1/ * T-5 PUNCH T-7 DIE 5/ * T-5 PUNCH T-7 DIE *es are non-stock; dies are standard and common with the No. XX Hand. For delivery information on punches, consult our sales department. For pricing information on non-stock sizes, consult our sales department. 10

11 NO. 7 HND PUNCH SNP LOCK PUNCHES and DIES STNDRD SIZES x B x B 7/16 x 3/ x T-7 For pricing and delivery information on non-stock sizes, consult our sales department. BUTTON PUNCHES and DIES STNDRD SIZES 3 THICKNESS of 22 GUGE T-7 For pricing and delivery information on non-stock sizes, consult our sales department. FOR PRICING and DELIVERY INFORMTION ON OTHER SPECIL CONFIGURTION PUNCHES ND DIES NOT LISTED, CONSULT OUR SLES DEPRTMENT. 11

12 NO. 8 HND PUNCH TYPE O Round es and s Standard s, Drill, or Millimeter Set Part Set 1/ $ $ $23.00 T-7 5/ $ $ $23.00 T-7 3/32-42 DS $ $ $23.00 T-7 7/ $ $ $23.00 T-7 1/ $ $ $23.00 T-7 9/64-28 DS $ $ $23.00 T-7 5/ $ $ $23.00 T-7 11/ $ $ $23.00 T-7 3/ $ $ $23.00 T-7 13/ $ $ $23.00 T-7 7/ $ $ $23.00 T-7 15/64- DS $ $ $23.00 T-7 1/4-E DS $ $ $23.00 T-7 17/64-H DS $ $ $23.00 T-7 9/32-K DS $ $ $23.00 T-7 19/ $ $ $23.00 T-7 5/ $ $ $23.00 T-7 21/ $ $ $23.00 T-7 11/ $ $ $23.00 T-7 23/ $ $ $23.00 T-7 3/ $ $ $23.00 T-7 25/ $ $ $23.00 T-7 13/ $ $ $23.00 T-7 27/ $ $ $23.00 T-7 7/ $ $ $23.00 T-7 29/ MM $ $ $23.00 T-7 15/ $ $ $23.00 T-7 31/ $ $ $23.00 T-7 1/ $ $ $23.00 T-7 12

13 PRICING FOR NON-STOCK ROUNDS MIN. : MX. : s for non-stock sizes (drill, millimeter, or fractional) Determine the dimension (diameter) NO. 8 HND PUNCH prices with annealed heads. T-5 prices with four eccentric slots. T-5 PRICING FOR NON-STOCK SHPES Width sizes under add 50% to the punch and die. Width sizes 0.63 thru add 30% to the punch & die T T T-5 SPECIL PURPOSE PUNCHES and DIES BUTTON PUNCHES and DIES STNDRD SIZES 3 THICKNESS of 22 GUGE T-7 For pricing and delivery information on non-stock sizes, consult our sales department. dditional information for trouble shooting punch head breakage Standard die clearance is / and not recommended for material heavier than 12ga. For punching 1/8 or heavier material Roper Whitney recommends punches with heads being annealed or using punches with four eccentric slots for additional strength of punch head to avoid breakage when stripping. Suggest die clearance of 15% to 20% of material thickness for best results. Style 8 and s are also used on the 4 in one Multi-tool.K.. Hang Four Fabricator. FOR PRICING and DELIVERY INFORMTION ON OTHER SPECIL CONFIGURTION PUNCHES ND DIES NOT LISTED, CONSULT OUR SLES DEPRTMENT. 13

14 NO. 10 & 12 HND PUNCHES TYPE O Round es and s Standard s, Drill, or Millimeter Set Part Set 1/ $ $ $32.00 T-7 5/ $ $ $32.00 T-7 3/32-42 DS $ $ $32.00 T-7 7/ $ $ $32.00 T-7 1/ $ $ $32.00 T-7 9/64-28 DS $ $ $32.00 T-7 5/ $ $ $32.00 T-7 11/ $ $ $32.00 T-7 3/ $ $ $32.00 T-7 13/ $ $ $32.00 T-7 7/ $ $ $32.00 T-7 15/64- DS $ $ $32.00 T-7 1/4-E DS $ $ $32.00 T-7 17/64-H DS $ $ $32.00 T-7 9/32-K DS $ $ $32.00 T-7 19/ $ $ $32.00 T-7 5/ $ $ $32.00 T-7 21/ $ $ $32.00 T-7 11/ $ $ $32.00 T-7 23/ $ $ $32.00 T-7 3/ $ $ $32.00 T-7 25/ $ $ $32.00 T-7 13/ $ $ $32.00 T-7 27/ $ $ $32.00 T-7 7/ $ $ $32.00 T-7 29/ MM $ $ $32.00 T-7 15/ $ $ $32.00 T-7 31/ $ $ $32.00 T-7 1/ $ $ $32.00 T-7 14

15 NO. 10 & 12 HND PUNCHES, Drill, or Millimeter Set Part Set 33/ $ $ $32.00 T-7 17/ MM $ $ $32.00 T $ $ $32.00 T-7 9/ $ $ $32.00 T-7 Standard Clearance 1/16 7/ /8 11/ /16 15/ /4 9/ TYPE O MIN. : MX. : s for non-stock sizes (drill, millimeter, or fractional) Determine the dimension (diameter) Coupling Nut Part (If Needed) T T T T-5 PRICING FOR NON-STOCK SHPES T-5 15

16 NO. 10 & 12 HND PUNCHES SPECIFY POSTION OF THE GUIDE STRIPPER WHEN ORDERING Note: When ordering irregular shaped punches and dies for these tools, a guide/stripper must also be ordered to maintain the critical alignment of the punch POSITION OPITIONL POSITION B STNDRD NOTE: Check coupling nut size required when ordering shapes use coupling nut use coupling nut use coupling nut SPECIL PURPOSE PUNCHES and DIES RIVETING PUNCHES and DIES STNDRD SIZES DIMENSION = WIDTH OF TUBULR RIVET Coupling Nut Part (If Needed) 1/ T-7 5/ T-7 3/ T-7 7/ T-7 1/ T-7 FOR PRICING and DELIVERY INFORMTION ON OTHER SPECIL CONFIGURTION PUNCHES ND DIES NOT LISTED, CONSULT OUR SLES DEPRTMENT. For I Beams T-5 16

17 NO. 16 HND PUNCH TYPE O Round es and s Standard s, Drill, or Millimeter Set Part Set 1/ $ $ $37.50 T-7 5/ $ $ $37.50 T-7 3/32-42 DS $ $ $37.50 T-7 7/ $ $ $37.50 T-7 1/ $ $ $32.50 T-7 9/64-28 DS $ $ $32.50 T-7 5/ $ $ $32.50 T-7 11/ $ $ $32.50 T-7 3/ $ $ $32.50 T-7 13/ $ $ $32.50 T-7 7/ $ $ $32.50 T-7 15/64- DS $ $ $32.50 T-7 1/4-E DS $ $ $32.50 T-7 17/64-H DS $ $ $32.50 T-7 9/32-K DS $ $ $32.50 T-7 19/ $ $ $32.50 T-7 5/ $ $ $32.50 T-7 21/ $ $ $32.50 T-7 11/ $ $ $32.50 T-7 23/ $ $ $32.50 T-7 3/ $ $ $32.50 T-7 25/ $ $ $32.50 T-7 13/ $ $ $32.50 T-7 27/ $ $ $32.50 T-7 7/ $ $ $32.50 T-7 29/ MM $ $ $32.50 T-7 15/ $ $ $32.50 T-7 31/ $ $ $32.50 T-7 1/ $ $ $32.50 T-7 17

18 NO. 16 HND PUNCH, Drill, or Millimeter Set Part Set 33/ $ $ $32.50 T-7 17/ MM $ $ $32.50 T $ $ $32.50 T-7 9/ $ $ $32.50 T-7 Standard Clearance LL SIZES TYPE O MIN. : MX. : s for non-stock sizes (drill, millimeter, or fractional) Determine the dimension (diameter) T T T-5 prices with annealed heads. T-5 prices with four eccentric slots. T-5 TYPE M x B STNDRD SIZE and CLERNCE x B Standard Clearance 1/4 x 1/ x T-7 PRICING FOR NON-STOCK SHPES T-5 Width sizes under add 50% to the punch and die. Width sizes 0.63 thru add 30% to the punch & die. dd $9.00 to shape punches for annealed heads. NOTE: to avoid punch head BREKGE use proper clearance in die. Roper Whitney suggests to order punches with annealed heads when punching 1/8 thick material or heavier. 18

19 NO. 17 HND PUNCH TYPE O Round es and s Standard s, Drill, or Millimeter Set Part Set 1/ $ $ $39.00 T-7 5/ $ $ $39.00 T-7 3/32-42 DS $ $ $39.00 T-7 7/ $ $ $39.00 T-7 1/ $ $ $32.50 T-7 9/64-28 DS $ $ $32.50 T-7 5/ $ $ $32.50 T-7 11/ $ $ $32.50 T-7 3/ $ $ $32.50 T-7 13/ $ $ $32.50 T-7 7/ $ $ $32.50 T-7 15/64- DS $ $ $32.50 T-7 1/4-E DS $ $ $32.50 T-7 17/64-H DS $ $ $32.50 T-7 9/32-K DS $ $ $32.50 T-7 19/ $ $ $32.50 T-7 5/ $ $ $32.50 T-7 21/ $ $ $32.50 T-7 11/ $ $ $32.50 T-7 23/ $ $ $32.50 T-7 3/ $ $ $32.50 T-7 25/ $ $ $32.50 T-7 13/ $ $ $32.50 T-7 27/ $ $ $32.50 T-7 7/ $ $ $32.50 T-7 29/ MM $ $ $32.50 T-7 15/ $ $ $32.50 T-7 31/ $ $ $32.50 T-7 1/ $ $ $32.50 T-7 19

20 NO. 17 HND PUNCH, Drill, or Millimeter Set Part Set 33/ $ $ $32.50 T-7 17/ MM $ $ $32.50 T $ $ $32.50 T-7 9/ $ $ $32.50 T-7 Standard Clearance LL SIZES TYPE O MIN. : MX. : s for non-stock sizes (drill, millimeter, or fractional) Determine the dimension (diameter) T T T-5 prices with annealed heads. T-5 prices with four eccentric slots. T-5 TYPE M x B STNDRD SIZE and CLERNCE x B Standard Clearance 1/4 x 1/ x T-7 PRICING FOR NON-STOCK SHPES T-5 Width sizes under add 50% to the punch and die. Width sizes 0.63 thru add 30% to the punch & die. NOTE: to avoid punch head BREKGE use proper clearance in die. Roper Whitney suggests to order punches with annealed heads when punching 1/8 thick material or heavier. 20

21 NO. CTL 20 HND PUNCH TYPE O Round es and s Standard s, Drill, or Millimeter Set Part Set 1/ $ $ $35.50 T-7 9/64-28 DS $ $ $35.50 T-7 5/ $ $ $35.50 T-7 11/ $ $ $35.50 T-7 3/ $ $ $35.50 T-7 13/ $ $ $35.50 T-7 7/ $ $ $35.50 T-7 15/64- DS $ $ $35.50 T-7 1/4-E DS $ $ $35.50 T-7 17/64-H DS $ $ $35.50 T-7 9/32-K DS $ $ $35.50 T-7 19/ $ $ $35.50 T-7 5/ $ $ $35.50 T-7 21/ $ $ $35.50 T-7 11/ $ $ $35.50 T-7 23/ $ $ $35.50 T-7 3/ $ $ $35.50 T-7 25/ $ $ $35.50 T-7 13/ $ $ $35.50 T-7 27/ $ $ $35.50 T-7 7/ $ $ $35.50 T-7 29/ MM $ $ $35.50 T-7 15/ $ $ $35.50 T-7 31/ $ $ $35.50 T-7 1/ $ $ $35.50 T-7 21

22 NO. CTL 20 HND PUNCH, Drill, or Millimeter Set Part Set 33/ $ $ $35.50 T-7 17/ MM $ $ $35.50 T $ $ $35.50 T-7 9/ $ $ $35.50 T-7 Standard Clearance 1/8 11/ /16 15/ /4 9/ TYPE O MIN. : MX. : s for non-stock sizes (drill, millimeter, or fractional) Determine the dimension (diameter) (Specify Clearance) Coupling Nut Part (If Needed) T-5 PRICING FOR NON-STOCK SHPES T-5 SPECIFY POSTION OF THE GUIDE STRIPPER WHEN ORDERING Note: When ordering irregular shaped punches and dies for these tools, a guide/stripper must also be ordered to maintain the critical alignment of the punch POSITION OPITIONL POSITION B STNDRD 22

23 NO. CTL 20 HND PUNCH SPECIL PURPOSE PUNCHES and DIES RIVETING PUNCHES and DIES STNDRD SIZES DIMENSION = WIDTH OF TUBULR RIVET Coupling Nut Part (If Needed) 1/ T-7 5/ T-7 3/ T-7 7/ T-7 1/ T-7 FOR PRICING and DELIVERY INFORMTION ON OTHER SPECIL CONFIGURTION PUNCHES ND DIES NOT LISTED, CONSULT OUR SLES DEPRTMENT. For I Beams T-5 NOTE: To avoid damage to coupling nut & spindle use proper wrench size Coupling Nut Wrench T-8 23

24 NO. 20 HND PUNCH TYPE O Round es and s Standard s, Drill, or Millimeter Set Part Set 1/ $ $ $39.00 T-7 9/64-28 DS $ $ $39.00 T-7 5/ $ $ $39.00 T-7 11/ $ $ $39.00 T-7 3/ $ $ $39.00 T-7 13/ $ $ $39.00 T-7 7/ $ $ $39.00 T-7 15/64- DS $ $ $39.00 T-7 1/4-E DS $ $ $39.00 T-7 17/64-H DS $ $ $39.00 T-7 9/32-K DS $ $ $39.00 T-7 19/ $ $ $39.00 T-7 5/ $ $ $39.00 T-7 21/ $ $ $39.00 T-7 11/ $ $ $39.00 T-7 23/ $ $ $39.00 T-7 3/ $ $ $39.00 T-7 25/ $ $ $39.00 T-7 13/ $ $ $39.00 T-7 27/ $ $ $39.00 T-7 7/ $ $ $39.00 T-7 29/ MM $ $ $39.00 T-7 15/ $ $ $39.00 T-7 31/ $ $ $39.00 T-7 1/ $ $ $39.00 T-7 24

25 NO. 20 HND PUNCH, Drill, or Millimeter Set Part Set 33/ $ $ $39.00 T-7 17/ MM $ $ $39.00 T $ $ $39.00 T-7 9/ $ $ $39.00 T-7 37/ $ $ $39.00 T-7 19/ $ $ $39.00 T-7 39/ $ $ $39.00 T-7 5/ $ $ $39.00 T-7 41/ $ $ $39.00 T-7 21/ $ $ $39.00 T-7 43/ $ $ $39.00 T-7 11/ $ $ $39.00 T-7 45/ $ $ $39.00 T-7 23/ $ $ $39.00 T-7 47/ $ $ $39.00 T-7 3/ $ $ $39.00 T-7 49/ $ $ $39.00 T-7 25/ $ $ $39.00 T-7 51/ $ $ $39.00 T-7 13/ $ $ $39.00 T-7 Standard Clearance 1/8 23/ /8 13/ TYPE O MIN. : MX. : s for non-stock sizes (drill, millimeter, or fractional) Determine the dimension (diameter) (Specify Clearance) Coupling Nut Part (If Needed) T T T-5 25

26 NO. 20 HND PUNCH PRICING FOR NON-STOCK SHPES range thru use coupling nut range thru use coupling nut range thru use coupling nut T-5 SPECIFY POSTION OF THE GUIDE STRIPPER WHEN ORDERING Note: When ordering irregular shaped punches and dies for these tools, a guide/stripper must also be ordered to maintain the critical alignment of the punch POSITION OPITIONL POSITION B STNDRD SPECIL PURPOSE PUNCHES and DIES RIVETING PUNCHES and DIES STNDRD SIZES DIMENSION = WIDTH OF TUBULR RIVET Coupling Nut Part (If Needed) 1/ T-7 5/ T-7 3/ T-7 7/ T-7 1/ T-7 9/ T-7 5/ T-7 11/ T-7 3/ T-7 FOR PRICING and DELIVERY INFORMTION ON OTHER SPECIL CONFIGURTION PUNCHES ND DIES NOT LISTED, CONSULT OUR SLES DEPRTMENT. 26

27 NO. 20 HND PUNCH BEVEL DIES Round T-5 NOTE: To avoid damage to coupling nut & spindle use proper wrench size Coupling Nut Wrench T-8 27

28 Roper Whitney Standard Terms and Conditions Ordering Information- Terms: Weights: Order Changes: Cancellations: Claims: Quotations: Ordering Rules: ll prices net, F.O.B. Factory ll weights listed are shipping weights No purchase order changes will be allowed after order has been processed by our order entry department except to correct an address or cancel the order. If changes are necessary a new purchase order must be entered. Purchaser may cancel an order which has been accepted by the Manufacturer, without penalty, five days before the scheduled ship dates. Orders cancelled between five days prior and the scheduled ship date will be subject to a 20% restocking fee. Orders may not be cancelled once the product has been shipped. ll claims for shortages must be made within 10 days of invoice dates. Phone quotations are effective only if confirmed prior to shipment. ll quotations must be in writing and are effective for 30 days only. BEFORE PLCING N ORDER, BE SURE TO OBSERVE THE FOLLOWING RULES TO SVE TIME ND COST OF PHONE CLLS OR CORRESPONDNCE. ing Tools o Thickness of materials o Type of material o Location of hole in material Shearing Tools o Thickness of material o Width of material o Length of material o Type of material Parts o The model number and serial number of the machine or tool. Shipping Instructions o Be sure to advise method of shipping o ll orders will be shipped UPS, Parcel post, or Motor Freight unless otherwise indicated. Return Merchandise Policy: The following is Roper Whitney s policy on merchandise returned. Merchandise returned will not be accepted without written authorization and authorized RG# on the outer label. Merchandise will not be accepted if the merchandise is not properly packed. Credit will not be allowed on merchandise that has been used or has been damaged as outlined in our Standard Warranty and subject to our inspection. ll shipments to Roper Whitney must be shipped prepaid unless prior authorization has been issued. restocking charge will be assessed on returned goods. Tools and machines returned to the factory for repairs will not be accepted unless formal purchase order accompanies or precedes tool or machine. If the tool or machine will require extensive repairs, the factory will notify customer of the approximate cost of such repairs. uthorization for the repairs must be received by the factory before the necessary repairs will be made. Minor repairs will be made by the factory without notification to the customer. Units considered non repairable by the factory will be scrapped within 30 days unless return is requested in advance. ll return claims must be made within 30 days after receipt of goods. 28