Clear Float Glass. August ** UV protection on laminated float glass is 99% TIPS:

Transcription

1 Clear Float Glass Our standard 2mm paper-interleaved float glass is clean and easy to use, perfect for the busy framer Laminated glass also has the added advantage of 99% UV protection We offer one of the largest ranges of float glasses to the framer with a variety of thicknesses and sheet sizes as well as a comprehensive Cut-to-Size service Float Glass s Size Stock s Cut-2-Size Metric Imperial sheet GL x x GL x x GL x x GL x x GL x x Larger sizes of 3mm and 4mm float are available - P.O.A. GL x x Laminated Float Glass ** GL x x ** UV protection on laminated float glass is 99% TIPS: If your panel size is more than 1mtr 2 or very long and narrow, think about 3mm glass for safety Float Glass Laminated Float Glass - Cut either side. Glaze either side - Use a good quality glass cleaner such as our GMC1 or NIL1 - Should only be cut by experienced operators and is best ordered cut to size - Use a good quality glass cleaner such as our GMC1 or NIL1 2

2 Water White Float Glass Ordinary float glass contains impurities which colour art Water White float glass gives pure colour rendition Laminated glass also has the added advantage of 99% UV protection s Size Stock s Metric Imperial sheet Cut-2-Size Water White Float - Papered GL x x Water White Float - Powdered GL65 ** x x GL66 ** x x GL68 ** x x Water White Laminated ФФ GL x ½ x ** powdered rather than paper interleaved ФФ UV protection on laminated float glass is 99% TIPS: Make yourself stand out from mass produced frame suppliers. Offer your customers Water White Float the glass that doesn t colour artwork! Water White Float Water White Laminated - Cut either side avoid cutting when glass is very cold. Glaze either side - Use a good quality glass cleaner such as our GMC1 or NIL1 - Should only be cut by experienced operators and is best ordered cut to size - Use a good quality glass cleaner such as our GMC1 or NIL1 3

3 Diffused Reflection Diffused Reflection (or non-glare) products are perfect when used in harsh lighting conditions Helps to reduce the mirror effect of unwanted reflection Not suitable for pictures with more than one standard thickness mount Diffused Reflection - Single sided ** ** use with etched side facing outward s Size Stock s Cut-2-Size Metric Imperial sheet GL x x GL x x GL x x TIPS: Use diffused reflection glass when bad glare is the problem NOT AR glass! Diffused Reflection - Cut either side glaze with etched side facing outwards - Use a good quality glass cleaner such as our GMC1 or NIL1 4

4 s per box UV Filtering Reflectance Size Imperial Size Metric August 2018 Speciality Glazing - Tru Vue Reflection Control Very fine acid etching on one side produces a non-glare glass - Not suitable for pictures with more than three standard thickness mounts UltraVue UV70 An almost invisible, low iron glass with an optical interference coating UltraVue UV92 An almost invisible, low iron glass with an optical interference coating and 92% UV protection BOXED LOOSE Cut-2-Size Reflection Control GL x x GL x x 36 <1.5% 70%* UltraVue UV70 GL x x 40 <1.5% 70%* GL x x 48 <1.5% 70%* NEW PRODUCT GL x x 63 <1.5% 70%* GL x x 36 <1.5% 92%* UltraVue UV92 GL x x 40 <1.5% 92%* GL x x 48 <1.5% 92%* NEW PRODUCT GL x x 63 <1.5% 92%* * Uses Reflection UV block figures quoted are for light striking the glass at 90 degrees only. Overall UV block is approximately 6% less than quoted. Reflection control UltraVue UV70 UltraVue UV92 - Cut either side glaze with etched side facing outwards - Use a good quality glass cleaner such as our GMC1 or NIL1 - Cut either side. Glaze either side - DO NOT USE abrasive or ammonia based cleaners. Use an optical glass cleaner such as our Optibrite or clean water with a drop! of liquid soap, rinse with clean water and dry. Use clean micro fibre cloths (our ref. CLOTH1). - Same as for UltraVue UV70 above 5

5 s per box UV Filtering Reflectance Size Imperial Size Metric August 2018 Speciality Glazing - Tru Vue (cont) Conservation Reflection Control Very fine acid etching on one side produces a non-glare glass plus a UV filter coat on one side Conservation Clear Normal float glass but with a UV filter coat one side Museum Almost invisible AR glass with a UV filter coat one side UltraVue Laminated Water white laminated AR glass combining very high UV block with safety protection BOXED LOOSE Cut-2-Size Conservation Reflection Control Conservation Clear Museum UltraVue Laminated GL x x 36 99% GL x x 40 99% GL x x 36 99% GL x x 40 99% GL x x 48 99% GL x x 36 <1% 99% GL x x 40 <1% 99% GL x x 48 <1% 99% GL x x 63 <1.5% 99% GL x x 72 <1.5% 99% Price On Application Conservation Ref Control & Conservation Clear Museum Ultravue Laminated - Glass is marked with cutting instructions. Cut the side which is NOT coated with the UV filter coat. Glaze with the UV filter coat facing the artwork. If in doubt call us. - Use a good quality glass cleaner such as our GMC1 or NIL1 DO NOT use abrasive or ammonia based cleaner. - Must be cut on non-coated side. Coated side goes against artwork - DO NOT USE abrasive or ammonia based cleaners. Use an optical glass cleaner such as our Optibrite or clean water with a drop! of liquid soap, rinse with clean water and dry. Use clean micro fibre cloths (our ref. CLOTH1). - Should only be cut by experienced operators and is best ordered cut to size - DO NOT USE abrasive or ammonia based cleaners. Use an optical glass cleaner such as our Optibrite or clean water with a drop! of liquid soap, rinse with clean water and dry. Use clean micro fibre cloths (our ref. CLOTH1). 6

6 s per box m 2 UV Filtering Reflectance Size Imperial Size Metric August 2018 Speciality Glazing - Schott Mirogard An almost invisible, low iron glass with an AR coating Mirogard Daro An almost invisible, low iron glass with an oleophobic coating Mirogard PLUS As above with a UV coating Mirogard PROTECT Water white laminated AR glass combining very high UV block with safety protection. BOXED LOOSE Cut-2-Size Schott Mirogard Mirogard & Mirogard Plus Mirogard Daro Mirogard Protect & Ultra GL x x 35 1% GL x x 48 1% GL x x 48 1% GL x x 70 1% GL x x 48 1% GL x x 70 1% Schott Mirogard Daro GL80D x x 35 1% Schott Mirogard PLUS Schott Mirogard PROTECT GL x x 35 1% 84% GL x x 48 1% 84% GL x x 48 1% 84% GL x x 70 1% 84% GL x x 48 1% 99% Cut either side. Glaze either side - Cut either side. Glaze coated side facing outwards - Should only be cut by experienced operators and is best ordered cut to size - DO NOT USE abrasive or ammonia based cleaners. Use an optical glass cleaner such as our Optibrite or clean water with a drop! of liquid soap, rinse with clean All Mirogard products water and dry. Use clean micro fibre cloths (our ref. CLOTH1). Tip - If in doubt as to which side has the UV filter coat put a drop of water on each side of the glass. The side on which the water beads up is the UV coated side 6.4 Factory cut to order only 1% 99% P.O.A 8.4 Factory cut to order only 1% 99% P.O.A Schott Mirogard PROTECT ULTRA GL x x 48 1% 99%

7 s per box UV Filtering Reflectance Size Imperial Size Metric August 2018 Speciality Glazing - Artglass Artglass AR70 and Clearview An almost invisible, low iron glass with an AR coating BOXED LOOSE Cut-2-Size Artglass Clearview Artglass AR70 GL x x 31 <1.5% 70%* GL x x 43 <1.5% 70%* GL x x 36 <1.5% 70%* GL x x 47 <1.5% 70%* GL x x 62 <1.5% 70%* * Uses Reflection UV block figures quoted are for light striking the glass at 90 degrees only. Overall UV block is approximately 6% less than quoted. TIPS: Clean your cutting bench or better still cover your bench with clean brown paper before cutting specialist glass to avoid scratching Artglass AR70 & Clearview - Cut either side. Glaze either side 8

8 s per box UV Filtering Reflectance Size Imperial Size Metric August 2018 Speciality Glazing - Artglass (cont.) Artglass 99 A 2mm float glass with a UV coating on one side (NOT AR) Artglass AR92 An almost invisible, low iron glass with an AR coating PLUS a 90% UV coating Artglass AR99 An almost invisible, low iron glass with an AR coating PLUS a 99% UV coating Artglass Laminated Water white laminated AR glass combining a very high UV block with safety protection BOXED LOOSE Cut-2-Size Artglass 99 TM GL x x 36-99% GL x x 40-99% Artglass AR92 TM GL x x 36 <1.5% 92%* GL x x 39 <1.5% 92%* GL x x 47 <1.5% 92%* GL x x 62 <1.5% 92%* Artglass AR99 TM GL x x 36 <1.5% 99% GL x x 39 <1.5% 99% Artglass Laminated GL x x 63 <1.5% 99% GL x x 88 <1.5% 99% Price On Application Artglass 99 TM Artglass AR92 TM Artglass AR99 TM Artglass Laminated * Uses Reflection UV block figures quoted are for light striking the glass at 90 degrees only. Overall UV block is approximately 6% less than quoted. - Glass is marked with cutting instructions. Cut the side which is NOT coated with the UV filter coat. Glaze with the UV filter coat facing the artwork. If in doubt call us. - Cut either side. Glaze either side - Glass is marked with cutting instructions. Cut the side which is NOT coated with the UV filter coat. Glaze with the UV filter coat facing the artwork. If in doubt call us. - Should only be cut by experienced operators and is best ordered cut to size All above Artglass products - DO NOT USE abrasive or ammonia based cleaners. Use an optical glass cleaner such as our Optibrite or clean water with a drop! of liquid soap, Rinse with clean water and dry. Use clean micro fibre cloths (our ref. CLOTH1). 9

9 Silvered Float All of our Silvered float glass is produced to BS/DIN Standards We offer a bespoke mirror service including bevelling, drilling, shaping and safety backing. Call your nearest branch for a quote. Safety backed silvered glass should be used in public places or where walls are being mirrored. Silvered Float Antiqued s Size Stock s Cut-2-Size Metric Imperial sheet GL x x GL x x GL x x GL x x GL x x GL x x mm Mirror maximum available size 2540 x 1650mm GL x x GL x x P.O.A. Safety Backed GL x x Silvered Float Antiqued Safety Backed - Must be cut on non-silvered side. Glaze silvered side inwards - Use a good quality glass cleaner such as our GMC1 or NIL1 - Must be cut on non-silvered side. Glaze silvered side inwards - Use a good quality glass cleaner such as our GMC1 or NIL1 - Must be cut in non-silvered side. Snap and cut safety backing with blade - Use a good quality glass cleaner such as our GMC1 or NIL1 10

10 Bevelled Mirrors - Special sizes available on request Size (metric) Size (Imperial) Price Size (metric) Size (Imperial) Price GL x x GL x x GL x x GL x x GL x x GL x x GL x x GL x x GL x x GL x x GL x x GL x x Plastic Glazing Styrene Lightweight, versatile and shatter resistant plastic glazing products are perfect for use in public areas or for use on images that may be transported. We offer a comprehensive range of plastics, from great value styrenes to high end, scratch resistant and low reflectance (AR) acrylics. Clear Styrene s Size Boxed Loose Box Cut-2-Size 2 Description Metric Imperial m quantity sheet sheet HY x x HY x x HY x x HY x x HY x x HY x x DIFFUSED REFLECTION Diffused Reflection Styrene HY x x All plastics - Thin plastics up to 3mm can be scored and snapped. For 3mm and above we recommend using a high speed circular saw with specialist blade designed for cutting plastic sheets. Glaze either side. - Use a good quality plastic cleaner such as our NOVUS1 or a non-abrasive glass cleaner. 11

11 Plastic Glazing (cont.) Acrylic Clear Acrylic s Size Boxed Loose UV Box Cut-2-Size Filtering Price quantity Price Description Metric Imperial per m 2 sheet per m 2 sheet HY7 (Extruded) 2 68% 2050 x x HY21 (Extruded) 2 68% 2050 x x HY9 (Cast) 3 68% 2030 x x HY34 (Cast) 3 68% 3050 x x HY99 (Cast) 5 68% 3050 x x DIFFUSED REFLECTION Diffused Reflection Acrylic HY % 2050 x x UV Cast Acrylic HY % 3050 x x UV FILTERING HY % 2030 x x HY % 3050 x x HY % 2030 x x HY % 3050 x x Acrylics (other than Tru Vue speciality products) are available in sizes 3050mm x 2030mm Cutting & glazing: All plastics Cleaning: - Thin plastics up to 3mm can be scored and snapped. For 3mm and above we recommend using a high speed circular saw with specialist blade designed for cutting plastic sheets. Clear/Diffused Acrylic - Use a good quality plastic or non-abrasive glass cleaner such as our NOVUS 1 UV Cast Acrylic - Use a good quality plastic or non-abrasive glass cleaner such as our NOVUS 1 12

12 Specialist Plastic Glazing Art-Shield - An abrasion resistant acrylic with UV filters Tru Vue Optium Museum - Combines the best of anti-reflective safety glass & UV-filtering acrylic in one product. Tru Vue TruLife - *NEW* Single-sided, anti-reflective acrylic for facemounting and direct print applications. s Size UV Description Filtering Metric Imperial Art-Shield UV Acrylic Scratch Resistant Boxed Loose Box Price quantity Price per m 2 sheet per m 2 sheet HY25 ** 3 99% 2050 x x HY211 ** 3 99% 3050 x x Cut-2-Size TruVue AR UV Optium Museum Acrylic HY % 2440 x x HY22 4.5* 99% 2440 x x per sheet HY23 6* 99% 3048 x x per sheet * Either half or full sheet cut to customer specification free of charge ** Abrasion resistant coating on one side only. Cutting & glazing: All plastics Cleaning: - Thin plastics up to 3mm can be scored and snapped. For 3mm and above we recommend using a high speed circular saw with specialist blade designed for cutting plastic sheets. Glaze either side -the UV filter in plastic sheets is in the body of the plastic - Artshield must be glazed with the Scratch Resistant side (pink film) facing outwards Art-Shield TM Acrylic - Use a good quality plastic or non-abrasive glass cleaner such as our NOVUS 1 Tru Vue Optium Museum Acrylic - MUST NOT be cleaned with a plastic polish. Use an optical glass cleaner such as our Optibrite or clean water with a drop! of liquid soap, rinse with clean water and dry. Use clean micro fibre cloths (our ref. CLOTH1). 13

13 Board s Quantity discounts available on all the following products listed below s Size Stock s Cut-2-Size 2 Description Metric Imperial m sheet MDF x x Medium Density Fibreboard (MDF) MDF x x MDF x x MDF x x MDF x x MDF x x MDF x x MDF x x MDF x x MDF x x ** 3mm MDF available cut to size up to 2440mm x 1830mm. Price on application. Art-Bak ART-BAK-A x x P.O.A. ART-BAK-S x x P.O.A. ART-BAK-C x x P.O.A. Britback BRITBACK x x P.O.A. Corri-Cor CORRI x x P.O.A. CORRI x x P.O.A. CORRI x x P.O.A. CORRICON x x P.O.A. CORRICONWR x x P.O.A. CORRIARC x x P.O.A. CORRIARCWR x x P.O.A. 14

14 Price on application August 2018 Board s (cont.) s Size Stock s 2 Description Metric Imperial m sheet Cut-2-Size Boxboard BB x x P.O.A. Conservatek CON x x P.O.A. Displayboard DISB x x P.O.A. DISB x x 41 3 / P.O.A. Greyboard ESK x x P.O.A. Hardboard HB x x P.O.A. Kraft/Barrier Faced Greyboard KLB x x P.O.A. Kraft/Barrier Faced Pulpboard KLB x x P.O.A. Nubord NUBORD x x P.O.A. NUBORD x x P.O.A. Pulpboard PB x x P.O.A. Pin Board SUND x x P.O.A. Wessex Barrier Board WBB x x P.O.A. s Size Packed Stock s Box 2 Description Metric Imperial m quantity sheet sheet Crescent Perfect Mount CMPX x x High Tack Self Adhesive ESA x x Jumbo Self Adhesive JSA x x Arqadia High Tack Self Adhesive x x Arqadia High Tack Self Adhesive x x Arqadia Heat Activated x x Arqadia Heat Activated x x Arqadia Repositionable x x Daler Repositionable 302/140/ x x Daler Repositionable 302/200/ x x Daler Xtra Tak 302/214/ x x Cut-2-Size 15

15 Board s (cont.) s Size Stock s (Split pack) Pack Rates 2 (in sheets) Description Metric Imperial m sheet Rate 1 / Rate 2 Pack Rate 1 Pack Rate 2 FO x x / FO x x / FO x x / Foam Core Board FO x x / FO x x / FO x x / FO x x / FO x x 60 ¼ / FO x x / Acid Free Foam Board FO x x / FO x x / All Black Foam Board FO x x / Crescent S/Adhesive Foam Board FO x x / Standard S/Adhesive Foam Board FO x x / FO x x / Ryno Board HD Foam Board FO x x / Kraft Lined Foam Core KLFO x x / KLFO x x /

16 Glass Cleaning NIL NIL General purpose non-smear glass & mirror cleaner. NOT suitable for coated glass. 1 ltr pump dispenser and 5 ltr top up bottle GMC Gives a smear less finish on coated and almost all other types of glass. 600ml cerosol can OPTI OPTI With its slow evaporation,gives optimum results on UV and coated types of glass. 150ml and 450ml spray bottles NOV NOV NOV1 cleans and polish, NOV2 removes fine scratches on plastics** Both 59ml bottles CLOTH mm x 400mm micro-fibre cloth GLC mm x 275m lint-free paper roll *** IMPORTANT *** GLC mm x 380mm lint-free cloth (x100) Novus Plastic Polish is, on no account, to be used on TruVue Optium Museum or StaticShield! Optibrite is the best in this instance GLC mm x 415mm lint-free cloth (x100) 17

17 Terms & Conditions 1. INTRODUCTION These terms and conditions (Conditions) set out the basis on which A.L. Younger Limited (company registration number ) trading as Wessex Pictures (Us/We/Our) will provide goods (Goods) to the person or firm who purchases the Goods from Us (You/Your). 2. THE CONTRACT 2.1 These Conditions apply to the contract between you and us for the sale of the Goods (Contract) to the exclusion of any other implied term that you seek to impose or incorporate. 2.2 The order for the Goods (Order) constitutes an offer by you to purchase the Goods in accordance with these Conditions. You are responsible for ensuring that any applicable specification (Specification) submitted by you is complete and accurate. 2.3 The Order shall only be deemed to be accepted when we issue a written acceptance of the Order, at which point the Contract shall come into existence. 2.4 The Contract constitutes the entire agreement between the parties. You acknowledge that you have not relied on any statement, promise or representation made or given by or on behalf of us which is not set out in the Contract. 2.5 Any samples, drawings, descriptive matter, or advertising produced by us and any descriptions or illustrations contained in our catalogues or brochures are produced for the sole purpose of giving an approximate idea of the Goods described in them. They shall not form part of the Contract or have any contractual force. 2.6 We reserve the right to amend the Specification if required by any applicable statutory or regulatory requirements. 3. PRICE AND DELIVERY COSTS 3.1 Whilst prices are set out in our price list these are indicative only and shall not constitute an offer. Price increases are sometimes unavoidable after a price list has been printed. The price invoiced will therefore be the price of the Goods as at the time of despatch. We recommend that you telephone to confirm current prices and/or check our website, if this is an important factor. 3.2 Prices are stated in pounds sterling and are exclusive of the costs and charges of packaging, insurance and transport of the Goods, which shall be invoiced to you. 3.3 The minimum Order value excluding VAT and delivery charges (including back orders) is and delivery charges start at For deliveries made via Wessex Van Delivery, the carriage paid will be For deliveries made via National Carrier, carriage paid will be as follows: To UK Mainland (exc. N.Ireland, C.Islands, Isle of Wight., Scotland & Scottish Highlands To N.Ireland, C.Islands, Isle of Wight. Scotland & Scottish Highlands P.O.A. 3.6 If you are ordering large quantities of Goods, discount may be available on request. 3.7 The price of the Goods is exclusive of VAT, which will be calculated at the appropriate rate on the total price for the Goods after all discounts have been deducted. 4. PAYMENT 4.1 Payment must be received immediately on delivery For account customers only, invoices must be paid in full and cleared funds within 30 days of the date of the invoice (unless we agree otherwise) by cash, cheque, most credit cards, or BACS (by prior arrangement). 4.3 Time of payment is of the essence and a represented and returned cheque will carry an administrative fee of If you fail to make any payment due to us under the Contract by the due date for payment (Due Date), then you shall pay interest on the overdue amount at the rate of 5% per annum above Nat West Plc Bank's base rate from time to time. Such interest shall accrue on a daily basis from the Due Date until the date of actual payment of the overdue amount, whether before or after judgment. You shall pay the interest together with the overdue amount. 4.5 You shall pay all amounts due under the Contract in full without any deduction or withholding except as required by law and you shall not be entitled to assert any credit, set-off or counterclaim against us in order to justify withholding payment of any such amount in whole or in part. We may at any time, without limiting any other rights or remedies we may have, set off any amount owing to us by you against any amount payable by us to you. 4.6 If you wish to open a credit account you must supply one bankers reference and two trade references (from within the framing industry). We may undertake a search with a credit reference agency before providing credit facilities. 4.7 The Seller reserves the right to refuse to execute any order or contract if the arrangements for payment or the credit of the Buyer appear to be or become unsatisfactory 4.8 The Order constitutes an offer by the Customer to purchase the Goods in accordance with these Conditions. The Customer is responsible for ensuring that the terms of the Order and any applicable Specification submitted by the Customer are complete and accurate. The Order shall only be deemed to be accepted when the Supplier issues a written acceptance of the Order, at which point the Contract shall come into existence. 5. DELIVERY 5.1 We shall deliver the Goods to the location set out in the Order or such other location as we jointly agree (Delivery Location) at any time after we notify you that the Goods are ready. 5.2 The cut-off times for placing orders as are follows: Wessex Van Delivery 2.30pm/National Carrier Delivery 12.00pm. 5.3 Any back orders under will be sent with your next carriage paid order. 5.4 Delivery of the Goods shall be completed on the Goods' arrival at the Delivery Location. 5.5 Any dates quoted for delivery are approximate only, and the time of delivery is not of the essence. 5.6 We shall have no liability for any failure to deliver the Goods, or any delay in delivery, to the extent that such failure or delay is caused by an event of Force Majeure or your failure to provide we with adequate delivery instructions or any other instructions that are relevant to the supply of the Goods. 5.7 If within 21 business days of us having notified you that the Goods were ready for delivery, you have not taken or accepted delivery of them, we may resell or otherwise dispose of part or all of the Goods and, after deducting reasonable storage and selling costs, account to you for any excess over the price of the Goods or charge you for any shortfall below the price of the Goods. 5.8 We may deliver the Goods by instalments, which shall be invoiced and paid for separately. Each instalment shall constitute a separate Contract. Any delay in delivery or defect in an instalment shall not entitle you to cancel any other instalment. 5.9 Notification of non-delivery must be made by you within 7 days of receipt by you of our invoice. 6. TITLE AND RISK 6.1 The risk in the Goods passes to you upon delivery. 6.2 Ownership of the Goods shall remain with us until we receive all sums due to us in full and cleared funds. 6.3 Until title to the Goods has passed to you, you shall: hold the Goods on a fiduciary basis as our bailee; store the Goods separately from all other goods held by you so that they remain readily identifiable as our property; not remove, deface or obscure any identifying mark or packaging on or relating to the Goods; maintain the Goods in satisfactory condition and keep them insured against all risks for their full price from the date of delivery; notify us immediately if you become subject to any of the events listed in clause 9.2; and give us such information relating to the Goods as we may require from time to time, but you may resell or use the Goods in the ordinary course of your business. 6.4 We may exercise our right to recover goods which we retain title to if payment is not received by the Due Date or you become subject to (or we reasonably believe that you are about to become subject to) any of the events listed in clause 9.2. We may enter your premises or the premises of any third party where the Goods are stored for the purposes of recovering the Goods. 7. INSPECTION AND DEFECTIVE GOODS 7.1 You are responsible for inspecting the Goods on delivery and we shall be under no liability for short deliveries, defective or damaged goods that would be apparent on careful inspection at the time of delivery. 7.2 You must give written notice within 3 days from the date of actual delivery of the Goods if there is any shortage of the Goods ordered or if the Goods are damaged or defective, failing which the Goods shall be deemed to have been delivered undamaged, without defect and in accordance with the Order. 7.3 On receipt of the notice referred to in clause 7.2 above, you shall allow us a reasonable opportunity to inspect the Goods before you use them. 7.4 In the event of a short delivery, you shall not be entitled to reject the Goods but shall accept the Goods as part performance of the Order, following which we shall deliver the missing Goods 18

18 Terms & Conditions (cont.) 7.5 In the event that the Goods are defective and such defect has been caused by faulty design, workmanship or materials, or the Goods are damaged prior to you receiving them, we will, at our option, either repair or replace the Goods or provide a refund (if payment for the Goods has been received). 7.6 Please note that we do not accept mitred lengths of moulding or cut mounts for credit. 8. CANCELLATION AND RETURN 8.1 We supply goods to trade customers only, acting in the course of their business. You do not therefore have the right to rely on the cancellation provisions of The Consumer Protection (Distance Selling) Regulations We may, at our absolute discretion, agree for an Order to be cancelled but in doing so, will seek to recover from you all costs, expenses and losses incurred as a result of such cancellation. 8.3 If Goods are being returned, with the exception of returnable empties, you must obtain returns authorisation from one of our authorised managers. 9. TERMINATION 9.1 If you become subject to any of the events listed in clause 9.2, or we reasonably believe that you are about to become subject to any of them and notify you accordingly, then, without limiting any other right or remedy available to us, we may cancel or suspend all further deliveries under the Contract or under any other contract between you and us without incurring any liability to you, and all outstanding sums in respect of Goods delivered to you shall become immediately due. 9.2 For the purposes of clause 9.1, the relevant events are: you suspend, or threaten to suspend, payment of your debts, or are unable to pay your debts as they fall due or you admit inability to pay those debts, or (being a company) you are deemed unable to pay your debts within the meaning of section 123 of the Insolvency Act 1986, or (being an individual) are deemed either unable to pay your debts or as having no reasonable prospect of so doing, in either case, within the meaning of section 268 of the Insolvency Act 1986, or (being a partnership) have any partner to whom any of the foregoing apply; (being a company) a petition is filed, a notice is given, a resolution is passed, or an order is made, for or in connection with the winding up of the company or an application is made to court, or an order is made, for the appointment of an administrator or if a notice of intention to appoint an administrator is given or if an administrator is appointed; (being an individual) you are the subject of a bankruptcy petition or order, you die or, by reason of illness or incapacity (whether mental or physical), are incapable of managing your own affairs or become a patient under any mental health legislation; or you suspend, threaten to suspend, cease or threaten to cease to carry on all or substantially the whole of your business. 9.3 Termination of the Contract, however arising, shall not affect any of the parties' rights and remedies that have accrued as at termination. Clauses which expressly or by implication survive termination of the Contract shall continue in full force and effect. 9.4 If you fail to pay any sum owing to us on the Due Date, all sums outstanding will become due and payable and without prejudice to any other rights, we may at our option either withhold further deliveries or cancel the Contract. 10. LIMITATION OF LIABILITY 10.1 Nothing in these Conditions shall limit or exclude our liability for: (a) death or personal injury caused by our negligence, or the negligence of our employees, agents or subcontractors (as applicable); (b) fraud or fraudulent misrepresentation; (c) breach of the terms implied by section 12 of the Sale of Goods Act 1979; or (d) defective products under the Consumer Protection Act Subject to clause 10.1: (a) we shall under no circumstances whatever be liable to you, whether in contract, tort (including negligence), breach of statutory duty, or otherwise, for any loss of profit, or any indirect or consequential loss arising under or in connection with the Contract; and (b) our total liability to you in respect of all other losses arising under or in connection with the Contract, whether in contract, tort (including negligence), breach of statutory duty, or otherwise, shall in no circumstances exceed the price of the Goods Where manufacturer of the Goods has limited or excluded their liability in respect of the Goods, the same limitation or exclusion shall apply to our liability on the sale of those Goods. 11. ASSIGNMENT AND SUBCONTRACTING 11.1 We may at any time assign, transfer, charge, subcontract or deal in any other manner with all or any of our rights or obligations under the Contract You may not assign, transfer, charge, subcontract or deal in any other manner with all or any of your rights or obligations under the Contract without our prior written consent. 12. FORCE MAJEURE We shall not be under any liability for any failure to perform any of our obligations due to events or circumstances outside our reasonable control. 13. NOTICES 13.1 Any notice or other communication given to a party under or in connection with the Contract shall be in writing, addressed to that party at its registered office (if it is a company) or its principal place of business (in any other case) or such other address as that party may have specified to the other party in writing in accordance with this clause, and shall be delivered personally, sent by pre-paid first class post, recorded delivery, commercial courier, fax A notice or other communication shall be deemed to have been received: if delivered personally, when left at the address referred to in clause 13.1; if sent by pre-paid first class post or recorded delivery, at 9.00am on the second business day after posting; if delivered by commercial courier, on the date and at the time that the courier's delivery receipt is signed; or, if sent by fax, one business day after transmission The provisions of this clause shall not apply to the service of any proceedings or other documents in any legal action. Contract shall not be affected. 14. SEVERANCE 14.1 If any court or competent authority finds that any provision of the Contract (or part of any provision) is invalid, illegal or unenforceable, that provision or part-provision shall, to the extent required, be deemed to be deleted, and the validity and enforceability of the other provisions of the 14.2 If any invalid, unenforceable or illegal provision of the Contract would be valid, enforceable and legal if some part of it were deleted, the provision shall apply with the minimum modification necessary to make it legal, valid and enforceable. 15.WAIVER A waiver of any right or remedy under the Contract is only effective if given in writing and shall not be deemed a waiver of any subsequent breach or default. No failure or delay by a party to exercise any right or remedy provided under the Contract or by law shall constitute a waiver of that or any other right or remedy, nor shall it preclude or restrict the further exercise of that or any other right or remedy. No single or partial exercise of such right or remedy shall preclude or restrict the further exercise of that or any other right or remedy. THIRD PARTY RIGHTS A person who is not a party to the Contract shall not have any rights under or in connection with it. VARIATION Except as set out in these Conditions, any variation to the Contract, including the introduction of any additional terms and conditions, shall only be binding when agreed by us in writing. PROPER LAW The construction validity and performance of this contract shall be governed by English law and all disputes shall be submitted to the exclusive jurisdiction of the English Court. Updated March